From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Giovagnini Date: Wed, 17 Mar 2010 11:31:25 +0000 Subject: Re: Hi All, hot to debug my eth0' hw? Message-Id: <201003171231.25214.fabio.giovagnini@aurion-tech.com> List-Id: References: <201003161225.42600.fabio.giovagnini@aurion-tech.com> In-Reply-To: <201003161225.42600.fabio.giovagnini@aurion-tech.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-sh@vger.kernel.org Sorry magnus, maybe I'm able to develop some pieces of kernel, but for sure= i=20 dont' know how to use the cooperative development tools; now I'm learing.=20 Thanks for your patience Thanks again In data mercoled=EC 17 marzo 2010 12:15:29, Magnus Damm ha scritto: : > On Wed, Mar 17, 2010 at 8:11 PM, Fabio Giovagnini >=20 > wrote: > > Is it accessible by me for example > > git://git.kernel.org/pub/scm/linux/kernel/git/magnus/sh-2.6.git > > > > or not? >=20 > You don't need any speical tree or patches. The normal sh-2.6 tree > should include all you need. Please try using the same commands as me > below: >=20 > Check last commit in git branch/tree: >=20 > damm@t400s ~/git/sh-2.6 $ git log -1 --oneline | head -n 1 > 3f7581d serial: sh-sci: remove duplicated #include >=20 > Look for board support: >=20 > damm@t400s ~/git/sh-2.6 $ grep SMSC911X_SWAP_FIFO > arch/sh/boards/mach-rsk/devices-rsk7203.c > .flags =3D SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO, >=20 > Look for driver support: >=20 > damm@t400s ~/git/sh-2.6 $ grep SMSC911X_SWAP_FIFO drivers/net/smsc911x.c > if (pdata->config.flags & SMSC911X_SWAP_FIFO) { > if (pdata->config.flags & SMSC911X_SWAP_FIFO) { > damm@t400s ~/git/sh-2.6 $ >=20 > Cheers, >=20 > / magnus > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >=20 --=20 Fabio Giovagnini Aurion s.r.l. P.I e C.F. 00885711200 Tel. +39.051.594.78.24 Cell. +39.335.83.50.919