From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 04/05] dmaengine: shdma: Introduce include/linux/sh_dma.h
Date: Fri, 19 Mar 2010 04:47:10 +0000 [thread overview]
Message-ID: <20100319044710.17051.98259.sendpatchset@t400s> (raw)
From: Magnus Damm <damm@opensource.se>
Create a common platform data header file for the
shdma dmaengine driver. This is done by moving
common structures from sh asm/dmaengine.h to
linux/sh_dma.h. DMA registers are also copied from
sh asm/dma-register.h to make the code architecture
independent.
The sh header file asm/dmaengine.h is still kept
with the slave id enum. This allows us to keep the
old processor specific code as is and slowly move
over to slave id enums in per-processor headers.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/sh/include/asm/dmaengine.h | 60 -----------------------
drivers/dma/shdma.c | 3 -
drivers/dma/shdma.h | 3 -
include/linux/sh_dma.h | 101 +++++++++++++++++++++++++++++++++++++++
4 files changed, 104 insertions(+), 63 deletions(-)
--- 0004/arch/sh/include/asm/dmaengine.h
+++ work/arch/sh/include/asm/dmaengine.h 2010-03-18 23:25:04.000000000 +0900
@@ -10,12 +10,7 @@
#ifndef ASM_DMAENGINE_H
#define ASM_DMAENGINE_H
-#include <linux/dmaengine.h>
-#include <linux/list.h>
-
-#include <asm/dma-register.h>
-
-#define SH_DMAC_MAX_CHANNELS 6
+#include <linux/sh_dma.h>
enum {
SHDMA_SLAVE_SCIF0_TX,
@@ -36,57 +31,4 @@ enum {
SHDMA_SLAVE_SIUB_RX,
};
-struct sh_dmae_slave_config {
- unsigned int slave_id;
- dma_addr_t addr;
- u32 chcr;
- char mid_rid;
-};
-
-struct sh_dmae_channel {
- unsigned int offset;
- unsigned int dmars;
- unsigned int dmars_bit;
-};
-
-struct sh_dmae_pdata {
- struct sh_dmae_slave_config *slave;
- int slave_num;
- struct sh_dmae_channel *channel;
- int channel_num;
- unsigned int ts_low_shift;
- unsigned int ts_low_mask;
- unsigned int ts_high_shift;
- unsigned int ts_high_mask;
- unsigned int *ts_shift;
- int ts_shift_num;
- u16 dmaor_init;
-};
-
-struct device;
-
-/* Used by slave DMA clients to request DMA to/from a specific peripheral */
-struct sh_dmae_slave {
- unsigned int slave_id; /* Set by the platform */
- struct device *dma_dev; /* Set by the platform */
- struct sh_dmae_slave_config *config; /* Set by the driver */
-};
-
-struct sh_dmae_regs {
- u32 sar; /* SAR / source address */
- u32 dar; /* DAR / destination address */
- u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_desc {
- struct sh_dmae_regs hw;
- struct list_head node;
- struct dma_async_tx_descriptor async_tx;
- enum dma_data_direction direction;
- dma_cookie_t cookie;
- size_t partial;
- int chunks;
- int mark;
-};
-
#endif
--- 0004/drivers/dma/shdma.c
+++ work/drivers/dma/shdma.c 2010-03-18 23:25:04.000000000 +0900
@@ -25,8 +25,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-
-#include <asm/dmaengine.h>
+#include <linux/sh_dma.h>
#include "shdma.h"
--- 0004/drivers/dma/shdma.h
+++ work/drivers/dma/shdma.h 2010-03-18 23:25:04.000000000 +0900
@@ -17,8 +17,7 @@
#include <linux/interrupt.h>
#include <linux/list.h>
-#include <asm/dmaengine.h>
-
+#define SH_DMAC_MAX_CHANNELS 6
#define SH_DMA_SLAVE_NUMBER 256
#define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */
--- /dev/null
+++ work/include/linux/sh_dma.h 2010-03-18 23:25:32.000000000 +0900
@@ -0,0 +1,101 @@
+/*
+ * Header for the new SH dmaengine driver
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_DMA_H
+#define SH_DMA_H
+
+#include <linux/list.h>
+#include <linux/dmaengine.h>
+
+/* Used by slave DMA clients to request DMA to/from a specific peripheral */
+struct sh_dmae_slave {
+ unsigned int slave_id; /* Set by the platform */
+ struct device *dma_dev; /* Set by the platform */
+ struct sh_dmae_slave_config *config; /* Set by the driver */
+};
+
+struct sh_dmae_regs {
+ u32 sar; /* SAR / source address */
+ u32 dar; /* DAR / destination address */
+ u32 tcr; /* TCR / transfer count */
+};
+
+struct sh_desc {
+ struct sh_dmae_regs hw;
+ struct list_head node;
+ struct dma_async_tx_descriptor async_tx;
+ enum dma_data_direction direction;
+ dma_cookie_t cookie;
+ size_t partial;
+ int chunks;
+ int mark;
+};
+struct sh_dmae_slave_config {
+ unsigned int slave_id;
+ dma_addr_t addr;
+ u32 chcr;
+ char mid_rid;
+};
+
+struct sh_dmae_channel {
+ unsigned int offset;
+ unsigned int dmars;
+ unsigned int dmars_bit;
+};
+
+struct sh_dmae_pdata {
+ struct sh_dmae_slave_config *slave;
+ int slave_num;
+ struct sh_dmae_channel *channel;
+ int channel_num;
+ unsigned int ts_low_shift;
+ unsigned int ts_low_mask;
+ unsigned int ts_high_shift;
+ unsigned int ts_high_mask;
+ unsigned int *ts_shift;
+ int ts_shift_num;
+ u16 dmaor_init;
+};
+
+/* DMA register */
+#define SAR 0x00
+#define DAR 0x04
+#define TCR 0x08
+#define CHCR 0x0C
+#define DMAOR 0x40
+
+/* DMAOR definitions */
+#define DMAOR_AE 0x00000004
+#define DMAOR_NMIF 0x00000002
+#define DMAOR_DME 0x00000001
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L 0x00000000
+#define REQ_E 0x00080000
+#define RACK_H 0x00000000
+#define RACK_L 0x00040000
+#define ACK_R 0x00000000
+#define ACK_W 0x00020000
+#define ACK_H 0x00000000
+#define ACK_L 0x00010000
+#define DM_INC 0x00004000
+#define DM_DEC 0x00008000
+#define DM_FIX 0x0000c000
+#define SM_INC 0x00001000
+#define SM_DEC 0x00002000
+#define SM_FIX 0x00003000
+#define RS_IN 0x00000200
+#define RS_OUT 0x00000300
+#define TS_BLK 0x00000040
+#define TM_BUR 0x00000020
+#define CHCR_DE 0x00000001
+#define CHCR_TE 0x00000002
+#define CHCR_IE 0x00000004
+
+#endif
next reply other threads:[~2010-03-19 4:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-19 4:47 Magnus Damm [this message]
2010-03-19 7:46 ` [PATCH 04/05] dmaengine: shdma: Introduce include/linux/sh_dma.h Guennadi Liakhovetski
2010-03-19 7:54 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100319044710.17051.98259.sendpatchset@t400s \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox