smc9118 problem

smc9118 problem

[Fabio Giovagnini]

Hi all, II have a problem with smc9118 chip;
I do not make any eeprom initialitazione because I do not have any eeprom on 
my board.
When occurs an rx overrun the chip stops to receive, and I have experienced 
that doing 
~> cat /proc/smc911x/resetphy
~> cat /proc/smc911x/resetsmc
~> cat /proc/smc911x/enable

it restart properly.

I'm using kernel 2.6.17; does any of you have suggetion about I nedd to check 
for discover which bits I have to set in case of rx overrun?

Thanks



-- 
Fabio Giovagnini

Aurion s.r.l.
P.I e C.F.
00885711200
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919

Re: smc9118 problem

[Paul Mundt]

On Mon, Mar 22, 2010 at 08:19:48PM +0100, Fabio Giovagnini wrote:
> Hi all, II have a problem with smc9118 chip;
> I do not make any eeprom initialitazione because I do not have any eeprom on 
> my board.
> When occurs an rx overrun the chip stops to receive, and I have experienced 
> that doing 
> ~> cat /proc/smc911x/resetphy
> ~> cat /proc/smc911x/resetsmc
> ~> cat /proc/smc911x/enable
> 
> it restart properly.
> 
> I'm using kernel 2.6.17; does any of you have suggetion about I nedd to check 
> for discover which bits I have to set in case of rx overrun?
> 
Please verify whether you can reproduce this with 2.6.34-rc2, thanks.

Re: smc9118 problem

[Fabio Giovagnini]

Ok. I'll do ASAP, but it will be not so easy, because I need a very complete 
different environment, as Andrew wrote some days ago.

Cheers and thanks.

P.S.
I can get  2.6.34-rc2 using git from sh rep or I need to download from the 
official kernel mirror?





In data martedì 23 marzo 2010 05:07:32, Paul Mundt ha scritto:
: > On Mon, Mar 22, 2010 at 08:19:48PM +0100, Fabio Giovagnini wrote:
> > Hi all, II have a problem with smc9118 chip;
> > I do not make any eeprom initialitazione because I do not have any eeprom
> > on my board.
> > When occurs an rx overrun the chip stops to receive, and I have
> > experienced that doing
> > ~> cat /proc/smc911x/resetphy
> > ~> cat /proc/smc911x/resetsmc
> > ~> cat /proc/smc911x/enable
> >
> > it restart properly.
> >
> > I'm using kernel 2.6.17; does any of you have suggetion about I nedd to
> > check for discover which bits I have to set in case of rx overrun?
> 
> Please verify whether you can reproduce this with 2.6.34-rc2, thanks.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
Fabio Giovagnini

Aurion s.r.l.
P.I e C.F.
00885711200
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919

Re: smc9118 problem

[Paul Mundt]

On Tue, Mar 23, 2010 at 06:39:25AM +0100, Fabio Giovagnini wrote:
> Ok. I'll do ASAP, but it will be not so easy, because I need a very complete 
> different environment, as Andrew wrote some days ago.
> 
> Cheers and thanks.
> 
> P.S.
> I can get  2.6.34-rc2 using git from sh rep or I need to download from the 
> official kernel mirror?
> 
Either one is fine.