From mboxrd@z Thu Jan  1 00:00:00 1970
From: Fabio Giovagnini <fabio.giovagnini@aurion-tech.com>
Date: Mon, 26 Apr 2010 07:13:47 +0000
Subject: Re: Hi guys, does any of you have experience with touchscreen controllers?
Message-Id: <201004260913.47950.fabio.giovagnini@aurion-tech.com>
List-Id: <linux-sh.vger.kernel.org>
References: <201004222004.38724.fabio.giovagnini@aurion-tech.com>
In-Reply-To: <201004222004.38724.fabio.giovagnini@aurion-tech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

In data domenica 25 aprile 2010 04:26:51, Dale Larson ha scritto:
: > Fabio Giovagnini wrote:
> > I'm working with ADS7843 and I have some troubles to get only the push
> > event on the screen.
> > If any of you knows a better place where to talk about this argument it
> > will be appreciated very much to tell me.
> >
> > Best regards
> 
> Hi Fabio,
> 
> I've dealt with that chip for our 7760 board. The key is to provide a pen
> poll function so pen up can be detected. Here's the way I defined it in the
> platform bsp stuff:
> 
> 
> 
> #include <linux/spi/spi.h>
> #include <linux/spi/ads7846.h>
> 
> 
> /* SPI devices - Touch Screen */
> 
> static int ads7843_pendown_state(void)
> {
>       return (ctrl_inb(PGDR) & 0x40) ? 0 : 1;
> }
Is this the pin where is connected the INT line of the ADS7843?

Thanks



> 
> static struct ads7846_platform_data ads_info = {
>      .model              = 7843,
>      .x_min              = 150,
>      .x_max              = 3830,
>      .y_min              = 190,
>      .y_max              = 3830,
>      .vref_delay_usecs   = 100,
>      .keep_vref_on       = 1,
>      .x_plate_ohms       = 576,
>      .y_plate_ohms       = 366,
>      .pressure_max       = 15000,    /* Generally nonsense on the 7843 */
>      .debounce_max       = 1,
>      .debounce_rep       = 0,
>      .debounce_tol       = (~0),
>      .get_pendown_state  = ads7843_pendown_state,
> };
> 
> static struct spi_board_info jcinap_spi_devices[] = {
>      {
>          /* Touchscreen controller */
>          .modalias       = "ads7846",
>          .chip_select    = 0,
>          .bus_num        = 0,
>          .max_speed_hz   = 1000000,   /* 1Mhz */
>          .platform_data  = &ads_info,
>          .irq            = 11
>      },
> };
> 
> 
> 
> In the init code:
> 
> 
> 
> /* Register the SPI devices */
> spi_register_board_info(jcinap_spi_devices,
>  ARRAY_SIZE(jcinap_spi_devices));
> 
> 
> 
> Dale Larson
> Johnson Controls, Inc
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
Fabio Giovagnini

Aurion s.r.l.
P.I e C.F.
00885711200
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919