From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: sh7367/G3EVM evt2irq() update
Date: Thu, 20 May 2010 14:35:30 +0000 [thread overview]
Message-ID: <20100520143530.27616.16098.sendpatchset@t400s> (raw)
From: Magnus Damm <damm@opensource.se>
This patch updates the irq numbers on sh7367/G3EVM
to make use of evt2irq() and intcs_evt2irq().
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/board-g3evm.c | 8 ++++----
arch/arm/mach-shmobile/setup-sh7367.c | 30 ++++++++++++++++++++++--------
2 files changed, 26 insertions(+), 12 deletions(-)
--- 0001/arch/arm/mach-shmobile/board-g3evm.c
+++ work/arch/arm/mach-shmobile/board-g3evm.c 2010-05-20 19:00:00.000000000 +0900
@@ -121,7 +121,7 @@ static struct resource usb_host_resource
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 65,
+ .start = evt2irq(0xa20), /* USBHS_USHI0 */
.flags = IORESOURCE_IRQ,
},
};
@@ -161,7 +161,7 @@ static struct resource keysc_resources[]
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 79,
+ .start = evt2irq(0xbe0), /* KEYSC_KEY */
.flags = IORESOURCE_IRQ,
},
};
@@ -224,7 +224,7 @@ static struct resource irda_resources[]
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 20,
+ .start = evt2irq(0x480), /* IRDA */
.flags = IORESOURCE_IRQ,
},
};
@@ -349,7 +349,7 @@ static void __init g3evm_init(void)
gpio_request(GPIO_FN_IRDA_OUT, NULL);
gpio_request(GPIO_FN_IRDA_IN, NULL);
gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
- set_irq_type(20, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
sh7367_add_standard_devices();
--- 0001/arch/arm/mach-shmobile/setup-sh7367.c
+++ work/arch/arm/mach-shmobile/setup-sh7367.c 2010-05-20 18:31:21.000000000 +0900
@@ -31,11 +31,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* SCIFA0 */
static struct plat_sci_port scif0_platform_data = {
.mapbase = 0xe6c40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 80, 80, 80, 80 },
+ .irqs = { evt2irq(0xc00), evt2irq(0xc00),
+ evt2irq(0xc00), evt2irq(0xc00) },
};
static struct platform_device scif0_device = {
@@ -46,11 +48,13 @@ static struct platform_device scif0_devi
},
};
+/* SCIFA1 */
static struct plat_sci_port scif1_platform_data = {
.mapbase = 0xe6c50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 81, 81, 81, 81 },
+ .irqs = { evt2irq(0xc20), evt2irq(0xc20),
+ evt2irq(0xc20), evt2irq(0xc20) },
};
static struct platform_device scif1_device = {
@@ -61,11 +65,13 @@ static struct platform_device scif1_devi
},
};
+/* SCIFA2 */
static struct plat_sci_port scif2_platform_data = {
.mapbase = 0xe6c60000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 82, 82, 82, 82 },
+ .irqs = { evt2irq(0xc40), evt2irq(0xc40),
+ evt2irq(0xc40), evt2irq(0xc40) },
};
static struct platform_device scif2_device = {
@@ -76,11 +82,13 @@ static struct platform_device scif2_devi
},
};
+/* SCIFA3 */
static struct plat_sci_port scif3_platform_data = {
.mapbase = 0xe6c70000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 83, 83, 83, 83 },
+ .irqs = { evt2irq(0xc60), evt2irq(0xc60),
+ evt2irq(0xc60), evt2irq(0xc60) },
};
static struct platform_device scif3_device = {
@@ -91,11 +99,13 @@ static struct platform_device scif3_devi
},
};
+/* SCIFA4 */
static struct plat_sci_port scif4_platform_data = {
.mapbase = 0xe6c80000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 89, 89, 89, 89 },
+ .irqs = { evt2irq(0xd20), evt2irq(0xd20),
+ evt2irq(0xd20), evt2irq(0xd20) },
};
static struct platform_device scif4_device = {
@@ -106,11 +116,13 @@ static struct platform_device scif4_devi
},
};
+/* SCIFA5 */
static struct plat_sci_port scif5_platform_data = {
.mapbase = 0xe6cb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 90, 90, 90, 90 },
+ .irqs = { evt2irq(0xd40), evt2irq(0xd40),
+ evt2irq(0xd40), evt2irq(0xd40) },
};
static struct platform_device scif5_device = {
@@ -121,11 +133,13 @@ static struct platform_device scif5_devi
},
};
+/* SCIFB */
static struct plat_sci_port scif6_platform_data = {
.mapbase = 0xe6c30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 91, 91, 91, 91 },
+ .irqs = { evt2irq(0xd60), evt2irq(0xd60),
+ evt2irq(0xd60), evt2irq(0xd60) },
};
static struct platform_device scif6_device = {
@@ -153,7 +167,7 @@ static struct resource cmt10_resources[]
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 72,
+ .start = evt2irq(0xb00), /* CMT1_CMT10 */
.flags = IORESOURCE_IRQ,
},
};
next reply other threads:[~2010-05-20 14:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-20 14:35 Magnus Damm [this message]
2010-05-22 8:32 ` [PATCH] ARM: mach-shmobile: sh7367/G3EVM evt2irq() update Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100520143530.27616.16098.sendpatchset@t400s \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox