From mboxrd@z Thu Jan 1 00:00:00 1970 From: Magnus Damm Date: Tue, 31 Aug 2010 09:27:53 +0000 Subject: [PATCH] ARM: mach-shmobile: Use evt2irq() for sh7372 DMAC Message-Id: <20100831092753.14892.19054.sendpatchset@t400s> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org From: Magnus Damm Use evt2irq() for DMAC resources on sh7372. This makes the code easier to read and also allows adjusting the INTC base offset without breaking platform data. Signed-off-by: Magnus Damm --- arch/arm/mach-shmobile/setup-sh7372.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- 0001/arch/arm/mach-shmobile/setup-sh7372.c +++ work/arch/arm/mach-shmobile/setup-sh7372.c 2010-08-31 16:03:53.000000000 +0900 @@ -419,14 +419,14 @@ static struct resource sh7372_dmae0_reso }, { /* DMA error IRQ */ - .start = 246, - .end = 246, + .start = evt2irq(0x20c0), + .end = evt2irq(0x20c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 240, - .end = 245, + .start = evt2irq(0x2000), + .end = evt2irq(0x20a0), .flags = IORESOURCE_IRQ, }, }; @@ -447,14 +447,14 @@ static struct resource sh7372_dmae1_reso }, { /* DMA error IRQ */ - .start = 254, - .end = 254, + .start = evt2irq(0x21c0), + .end = evt2irq(0x21c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 248, - .end = 253, + .start = evt2irq(0x2100), + .end = evt2irq(0x21a0), .flags = IORESOURCE_IRQ, }, }; @@ -475,14 +475,14 @@ static struct resource sh7372_dmae2_reso }, { /* DMA error IRQ */ - .start = 262, - .end = 262, + .start = evt2irq(0x22c0), + .end = evt2irq(0x22c0), .flags = IORESOURCE_IRQ, }, { /* IRQ for channels 0-5 */ - .start = 256, - .end = 261, + .start = evt2irq(0x2200), + .end = evt2irq(0x22a0), .flags = IORESOURCE_IRQ, }, };