From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [patch v3 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM
Date: Thu, 14 Oct 2010 09:12:33 +0000 [thread overview]
Message-ID: <20101014091434.501864612@vergenet.net> (raw)
In-Reply-To: 20101014091231.858799238@vergenet.net
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
When CONFIG_ZBOOT_ROM is selected, the resulting zImage file will be small
boot loader and may be burned to rom or flash.
This is the board-specific portion of this patch-set.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
v2:
* As suggested by Magnus Damm; Implemented by Simon Horman
- Initialise atags in framework and pass atags to kernel.
This removes the need for board-specific fixup code.
Index: linux-2.6-arm/arch/arm/mach-shmobile/board-ap4evb.c
=================================--- linux-2.6-arm.orig/arch/arm/mach-shmobile/board-ap4evb.c 2010-10-14 16:55:20.000000000 +0900
+++ linux-2.6-arm/arch/arm/mach-shmobile/board-ap4evb.c 2010-10-14 16:58:11.000000000 +0900
@@ -58,6 +58,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include <asm/setup.h>
/*
* Address Interface BusWidth note
Index: linux-2.6-arm/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
=================================--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-arm/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt 2010-10-14 16:58:11.000000000 +0900
@@ -0,0 +1,87 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2010 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
+
+LIST "RWT Setting"
+EW 0xE6020004, 0xA500
+EW 0xE6030004, 0xA500
+
+DD 0x01001000, 0x01001000
+
+LIST "GPIO Setting"
+EB 0xE6051013, 0xA2
+
+LIST "CPG"
+ED 0xE6150080, 0x00000180
+ED 0xE61500C0, 0x00000002
+
+WAIT 1, 0xFE40009C
+
+LIST "FRQCR"
+ED 0xE6150000, 0x2D1305C3
+ED 0xE61500E0, 0x9E40358E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE61500E4, 0x00002000
+
+WAIT 1, 0xFE40009C
+
+LIST "PLL"
+ED 0xE6150028, 0x00004000
+
+WAIT 1, 0xFE40009C
+
+ED 0xE615002C, 0x93000040
+
+WAIT 1, 0xFE40009C
+
+LIST "BSC"
+ED 0xFEC10000, 0x00E0001B
+
+LIST "SBSC1"
+ED 0xFE400354, 0x01AD8000
+ED 0xFE400354, 0x01AD8001
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400008, 0xBCC90151
+ED 0xFE400040, 0x41774113
+ED 0xFE400044, 0x2712E229
+ED 0xFE400048, 0x20C18505
+ED 0xFE40004C, 0x00110209
+ED 0xFE400010, 0x00000087
+
+WAIT 10, 0xFE40009C
+
+ED 0xFE400084, 0x0000003F
+EB 0xFE500000, 0x00
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400084, 0x0000FF0A
+EB 0xFE500000, 0x00
+
+WAIT 1, 0xFE40009C
+
+ED 0xFE400084, 0x00002201
+EB 0xFE500000, 0x00
+ED 0xFE400084, 0x00000302
+EB 0xFE500000, 0x00
+EB 0xFE5C0000, 0x00
+ED 0xFE400008, 0xBCC90159
+ED 0xFE40008C, 0x88800004
+ED 0xFE400094, 0x00000004
+ED 0xFE400028, 0xA55A0032
+ED 0xFE40002C, 0xA55A000C
+ED 0xFE400020, 0xA55A2048
+ED 0xFE400008, 0xBCC90959
+
+LIST "Change CPGA setting"
+ED 0xE61500E0, 0x9E40352E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE6150354, 0x00000002
Index: linux-2.6-arm/arch/arm/mach-shmobile/include/mach/zboot_macros.h
=================================--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6-arm/arch/arm/mach-shmobile/include/mach/zboot_macros.h 2010-10-14 16:58:11.000000000 +0900
@@ -0,0 +1,65 @@
+#ifndef __ZBOOT_MACRO_H
+#define __ZBOOT_MACRO_H
+
+/* The LIST command is used to include comments in the script */
+.macro LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro ED, addr, data
+ LDR r0, 1f
+ LDR r1, 2f
+ STR r1, [r0]
+ B 3f
+1 : .long \addr
+2 : .long \data
+3 :
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro EW, addr, data
+ LDR r0, 1f
+ LDR r1, 2f
+ STRH r1, [r0]
+ B 3f
+1 : .long \addr
+2 : .long \data
+3 :
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro EB, addr, data
+ LDR r0, 1f
+ LDR r1, 2f
+ STRB r1, [r0]
+ B 3f
+1 : .long \addr
+2 : .long \data
+3 :
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro WAIT, time, reg
+ LDR r1, 1f
+ LDR r0, 2f
+ STR r0, [r1]
+10 :
+ LDR r0, [r1]
+ CMP r0, #0x00000000
+ BNE 10b
+ NOP
+ B 3f
+1 : .long \reg
+2 : .long \time * 100
+3 :
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro DD, start, end
+ LDR r1, 1f
+ B 2f
+1 : .long \start
+2 :
+.endm
+
+#endif /* __ZBOOT_MACRO_H */
Index: linux-2.6-arm/arch/arm/mach-shmobile/include/mach/zboot.h
=================================--- linux-2.6-arm.orig/arch/arm/mach-shmobile/include/mach/zboot.h 2010-10-14 16:55:20.000000000 +0900
+++ linux-2.6-arm/arch/arm/mach-shmobile/include/mach/zboot.h 2010-10-14 16:58:11.000000000 +0900
@@ -1,12 +1,20 @@
#ifndef ZBOOT_H
#define ZBOOT_H
+#include <asm/mach-types.h>
+#include <mach/zboot_macros.h>
+
/**************************************************
*
* board specific settings
*
**************************************************/
+#ifdef CONFIG_MACH_AP4EVB
+#define MACH_TYPE MACH_TYPE_AP4EVB
+#include "mach/head-ap4evb.txt"
+#else
#error "unsupported board."
+#endif
#endif /* ZBOOT_H */
next prev parent reply other threads:[~2010-10-14 9:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-14 9:12 [patch v3 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM Simon Horman
2010-10-14 9:12 ` [patch v3 1/2] ARM: " Simon Horman
2010-10-14 9:12 ` Simon Horman [this message]
2010-11-07 17:23 ` [patch v3 2/2] ARM: mach-shmobile: Add zboot support for Russell King - ARM Linux
2010-11-08 1:57 ` Simon Horman
2010-11-14 23:22 ` Simon Horman
2010-11-06 0:28 ` [patch v3 0/2] " Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101014091434.501864612@vergenet.net \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox