linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v5 06/15] ARM: shmobile: r8a7790: Switch to new style CMT device
Date: Mon, 12 May 2014 12:40:28 +0000	[thread overview]
Message-ID: <2010359.2Ko53VDNYm@avalon> (raw)
In-Reply-To: <1398251722-31667-7-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Hi Simon,

On Sunday 11 May 2014 20:46:54 Simon Horman wrote:
> On Wed, Apr 23, 2014 at 01:15:13PM +0200, Laurent Pinchart wrote:
> > The CMT (Compare Match Timer) driver implements a new style of platform
> > data that handles the timer as a single device with multiple channel.
> > Switch from the old-style platform data to the new-style platform data.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> 
> Hi Laurent,
> 
> I have queued up the following after updating the
> board-lager-reference.c portion of the patch to use clk_name.
> 
> Please check to see that what I have is correct.
> 
> 
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> 
> ARM: shmobile: r8a7790: Switch to new style CMT device
> 
> The CMT (Compare Match Timer) driver implements a new style of platform
> data that handles the timer as a single device with multiple channel.
> Switch from the old-style platform data to the new-style platform data.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> [horms+renesas@verge.net.au resolved conflict: use clk_names]
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This looks good to me, thank you.

> ---
>  arch/arm/mach-shmobile/board-lager-reference.c |  2 +-
>  arch/arm/mach-shmobile/clock-r8a7790.c         |  2 +-
>  arch/arm/mach-shmobile/setup-r8a7790.c         | 17 +++++++----------
>  3 files changed, 9 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-lager-reference.c
> b/arch/arm/mach-shmobile/board-lager-reference.c index 1eb48cf..1bca2748
> 100644
> --- a/arch/arm/mach-shmobile/board-lager-reference.c
> +++ b/arch/arm/mach-shmobile/board-lager-reference.c
> @@ -90,7 +90,7 @@ static void __init lager_add_du_device(void)
>   * devices until they get moved to DT.
>   */
>  static const struct clk_name clk_names[] __initconst = {
> -	{ "cmt0", NULL, "sh_cmt.0" },
> +	{ "cmt0", "fck", "sh-cmt-48-gen2.0" },
>  	{ "scifa0", NULL, "sh-sci.0" },
>  	{ "scifa1", NULL, "sh-sci.1" },
>  	{ "scifb0", NULL, "sh-sci.2" },
> diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c
> b/arch/arm/mach-shmobile/clock-r8a7790.c index a936ae7..296a057 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7790.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7790.c
> @@ -357,7 +357,6 @@ static struct clk_lookup lookups[] = {
>  	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
>  	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
>  	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
> -	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
>  	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
>  	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
>  	CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]),
> @@ -367,6 +366,7 @@ static struct clk_lookup lookups[] = {
>  	CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
> 
>  	/* ICK */
> +	CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]),
>  	CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
>  	CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
>  	CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
> diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c
> b/arch/arm/mach-shmobile/setup-r8a7790.c index c4616f0..87327f3 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7790.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7790.c
> @@ -269,20 +269,17 @@ static const struct resource thermal_resources[]
> __initconst = { thermal_resources,		\
>  					ARRAY_SIZE(thermal_resources))
> 
> -static const struct sh_timer_config cmt00_platform_data __initconst = {
> -	.name = "CMT00",
> -	.timer_bit = 0,
> -	.clockevent_rating = 80,
> +static struct sh_timer_config cmt0_platform_data = {
> +	.channels_mask = 0x60,
>  };
> 
> -static const struct resource cmt00_resources[] __initconst = {
> -	DEFINE_RES_MEM(0xffca0510, 0x0c),
> -	DEFINE_RES_MEM(0xffca0500, 0x04),
> -	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
> +static struct resource cmt0_resources[] = {
> +	DEFINE_RES_MEM(0xffca0000, 0x1004),
> +	DEFINE_RES_IRQ(gic_spi(142)),
>  };
> 
>  #define r8a7790_register_cmt(idx)					\
> -	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
> +	platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \
>  					  idx, cmt##idx##_resources,	\
>  					  ARRAY_SIZE(cmt##idx##_resources), \
>  					  &cmt##idx##_platform_data,	\
> @@ -300,7 +297,7 @@ void __init r8a7790_add_dt_devices(void)
>  	r8a7790_register_scif(7);
>  	r8a7790_register_scif(8);
>  	r8a7790_register_scif(9);
> -	r8a7790_register_cmt(00);
> +	r8a7790_register_cmt(0);
>  }
> 
>  void __init r8a7790_add_standard_devices(void)

-- 
Regards,

Laurent Pinchart


      parent reply	other threads:[~2014-05-12 12:40 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-23 11:15 [PATCH v5 06/15] ARM: shmobile: r8a7790: Switch to new style CMT device Laurent Pinchart
2014-05-11 11:46 ` Simon Horman
2014-05-12 12:40 ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2010359.2Ko53VDNYm@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).