From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Ball Date: Wed, 05 Jan 2011 20:58:17 +0000 Subject: Re: [PATCH 2/6 v3] mfd: sh_mobile_sdhi: activate SDIO IRQ for Message-Id: <20110105205817.GH9198@void.printf.net> List-Id: References: <1293574956-30035-1-git-send-email-arnd@arndnet.de> <1293574956-30035-3-git-send-email-arnd@arndnet.de> In-Reply-To: <1293574956-30035-3-git-send-email-arnd@arndnet.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Arnd Hannemann Cc: linux-mmc@vger.kernel.org, Magnus Damm , linux-sh@vger.kernel.org, g.liakhovetski@gmx.de, Ian Molton , Samuel Ortiz Hi Arnd, On Tue, Dec 28, 2010 at 11:22:32PM +0100, Arnd Hannemann wrote: > The SDHI Controller on SH-Mobile SoCs supports SDIO IRQ signalling. > This patch advertises this fact to the tmio_mmc driver. > > Signed-off-by: Arnd Hannemann > Acked-by: Samuel Ortiz > --- > drivers/mfd/sh_mobile_sdhi.c | 5 +++++ > 1 files changed, 5 insertions(+), 0 deletions(-) > > diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c > index 3ca20ec..0a7df44 100644 > --- a/drivers/mfd/sh_mobile_sdhi.c > +++ b/drivers/mfd/sh_mobile_sdhi.c > @@ -131,6 +131,11 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) > */ > mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; > > + /* > + * All SDHI blocks support SDIO IRQ signalling. > + */ > + mmc_data->flags |= TMIO_MMC_SDIO_IRQ; > + > if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { > priv->param_tx.slave_id = p->dma_slave_tx; > priv->param_rx.slave_id = p->dma_slave_rx; Thanks, pushed to mmc-next for .38. You can send on the arch dependencies now, explaining that the code they depend on is waiting in -next. -- Chris Ball One Laptop Per Child