* [PATCH] sh: sh7366 Enable SDIO IRQs
@ 2011-01-06 11:12 Magnus Damm
0 siblings, 0 replies; only message in thread
From: Magnus Damm @ 2011-01-06 11:12 UTC (permalink / raw)
To: linux-sh
From: Magnus Damm <damm@opensource.se>
This patch enables interrupt generation for SDIO IRQs
of the SDHI block on the sh7366 processor. Use together
with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and
with the MMC_CAP_SDIO_IRQ flag in the board code.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- 0011/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7366.c 2011-01-06 20:07:10.000000000 +0900
@@ -324,6 +324,8 @@ void __init sh7366_mem_init(void)
enum {
UNUSED=0,
+ ENABLED,
+ DISABLED,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
@@ -337,14 +339,13 @@ enum {
DENC, MSIOF,
FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI,
- SDHI0, SDHI1, SDHI2, SDHI3,
- CMT, TSIF, SIU,
+ SDHI, CMT, TSIF, SIU,
TMU0, TMU1, TMU2,
VEU2, LCDC,
/* interrupt groups */
- DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C, SDHI,
+ DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C,
};
static struct intc_vect vectors[] __initdata = {
@@ -369,8 +370,8 @@ static struct intc_vect vectors[] __init
INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
INTC_VECT(I2C_ALI, 0xe00), INTC_VECT(I2C_TACKI, 0xe20),
INTC_VECT(I2C_WAITI, 0xe40), INTC_VECT(I2C_DTEI, 0xe60),
- INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
- INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+ INTC_VECT(SDHI, 0xe80), INTC_VECT(SDHI, 0xea0),
+ INTC_VECT(SDHI, 0xec0), INTC_VECT(SDHI, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
INTC_VECT(SIU, 0xf80),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
@@ -386,7 +387,6 @@ static struct intc_group groups[] __init
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
INTC_GROUP(I2C, I2C_ALI, I2C_TACKI, I2C_WAITI, I2C_DTEI),
- INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
@@ -408,7 +408,7 @@ static struct intc_mask_reg mask_registe
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
- { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+ { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, 0, SIU } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT, 0, USB, } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
@@ -446,9 +446,13 @@ static struct intc_mask_reg ack_register
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
-static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
- mask_registers, prio_registers, sense_registers,
- ack_registers);
+static struct intc_desc intc_desc __initdata = {
+ .name = "sh7366",
+ .force_enable = ENABLED,
+ .force_disable = DISABLED,
+ .hw = INTC_HW_DESC(vectors, groups, mask_registers,
+ prio_registers, sense_registers, ack_registers),
+};
void __init plat_irq_setup(void)
{
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-01-06 11:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-06 11:12 [PATCH] sh: sh7366 Enable SDIO IRQs Magnus Damm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).