[PATCH] sh: fix compile error using sh7757lcr_defconfig

[PATCH] sh: fix compile error using sh7757lcr_defconfig

[Yoshihiro Shimoda]

Fix the complie error in ehci-hcd.c because it needs an additional
configuration.

  CC      drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd"
make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 arch/sh/configs/sh7757lcr_defconfig |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index 33ddb13..cfde98d 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_LOG_BUF_SHIFT\x14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -39,8 +38,6 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
@@ -56,18 +53,19 @@ CONFIG_SH_ETH=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=3
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
 CONFIG_SPI_SH=y
 # CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SH=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_SH=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
-- 
1.7.1

Re: [PATCH] sh: fix compile error using sh7757lcr_defconfig

[Paul Mundt]

On Tue, Jun 21, 2011 at 05:03:25PM +0900, Yoshihiro Shimoda wrote:
> Fix the complie error in ehci-hcd.c because it needs an additional
> configuration.
> 
>   CC      drivers/usb/host/ehci-hcd.o
> drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd"
> make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
> make[2]: *** [drivers/usb/host] Error 2
> make[1]: *** [drivers/usb] Error 2
> make: *** [drivers] Error 2
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

On Tue, Jun 21, 2011 at 05:28:27PM +0900, Yoshihiro Shimoda wrote:
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
>  arch/sh/kernel/cpu/sh4a/setup-sh7757.c |   50 ++++++++++++++++++++++++++++++++
>  1 files changed, 50 insertions(+), 0 deletions(-)
> 

Both applied, thanks.