From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Linux-sh list <linux-sh@vger.kernel.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 1/3] PM / Sleep: Mark devices involved in wakeup signaling during suspend
Date: Wed, 19 Oct 2011 22:13:56 +0000 [thread overview]
Message-ID: <201110200013.56428.rjw@sisk.pl> (raw)
In-Reply-To: <201110200012.43840.rjw@sisk.pl>
From: Rafael J. Wysocki <rjw@sisk.pl>
The generic PM domains code in drivers/base/power/domain.c has
to avoid powering off domains that provide power to wakeup devices
during system suspend. Currently, however, this only works for
wakeup devices directly belonging to the given domain and not for
their children (or the children of their children and so on).
Thus, if there's a wakeup device whose parent belongs to a power
domain handled by the generic PM domains code, the domain will be
powered off during system suspend preventing the device from
signaling wakeup.
To address this problem introduce a device flag, power.wakeup_path,
that will be set during system suspend for all wakeup devices,
their parents, the parents of their parents and so on. This way,
all wakeup paths in the device hierarchy will be marked and the
generic PM domains code will only need to avoid powering off
domains containing devices whose power.wakeup_path is set.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/base/power/domain.c | 4 ++--
drivers/base/power/main.c | 8 +++++++-
include/linux/pm.h | 1 +
3 files changed, 10 insertions(+), 3 deletions(-)
Index: linux/drivers/base/power/domain.c
=================================--- linux.orig/drivers/base/power/domain.c
+++ linux/drivers/base/power/domain.c
@@ -714,7 +714,7 @@ static int pm_genpd_suspend_noirq(struct
if (ret)
return ret;
- if (device_may_wakeup(dev)
+ if (dev->power.wakeup_path
&& genpd->active_wakeup && genpd->active_wakeup(dev))
return 0;
@@ -938,7 +938,7 @@ static int pm_genpd_dev_poweroff_noirq(s
if (ret)
return ret;
- if (device_may_wakeup(dev)
+ if (dev->power.wakeup_path
&& genpd->active_wakeup && genpd->active_wakeup(dev))
return 0;
Index: linux/drivers/base/power/main.c
=================================--- linux.orig/drivers/base/power/main.c
+++ linux/drivers/base/power/main.c
@@ -917,7 +917,11 @@ static int __device_suspend(struct devic
}
End:
- dev->power.is_suspended = !error;
+ if (!error) {
+ dev->power.is_suspended = true;
+ if (dev->power.wakeup_path && dev->parent)
+ dev->parent->power.wakeup_path = true;
+ }
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -1020,6 +1024,8 @@ static int device_prepare(struct device
device_lock(dev);
+ dev->power.wakeup_path = device_may_wakeup(dev);
+
if (dev->pm_domain) {
pm_dev_dbg(dev, state, "preparing power domain ");
if (dev->pm_domain->ops.prepare)
Index: linux/include/linux/pm.h
=================================--- linux.orig/include/linux/pm.h
+++ linux/include/linux/pm.h
@@ -452,6 +452,7 @@ struct dev_pm_info {
struct list_head entry;
struct completion completion;
struct wakeup_source *wakeup;
+ bool wakeup_path:1;
#else
unsigned int should_wakeup:1;
#endif
next prev parent reply other threads:[~2011-10-19 22:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 22:12 [PATCH 0/3] Support for A3SP and A4R domains on SH7372 Rafael J. Wysocki
2011-10-19 22:13 ` Rafael J. Wysocki [this message]
2011-11-02 9:29 ` [PATCH 1/3] PM / Sleep: Mark devices involved in wakeup signaling Guennadi Liakhovetski
2011-10-19 22:14 ` [PATCH 2/3] ARM: mach-shmobile: sh7372 A3SP support (v4) Rafael J. Wysocki
2011-10-19 22:15 ` [PATCH 3/3] ARM: mach-shmobile: sh7372 A4R " Rafael J. Wysocki
2011-11-02 10:38 ` Guennadi Liakhovetski
2011-11-02 14:18 ` Magnus Damm
2011-11-02 20:52 ` Guennadi Liakhovetski
2011-11-02 22:00 ` Guennadi Liakhovetski
2011-11-02 23:17 ` Rafael J. Wysocki
2011-11-16 21:05 ` Guennadi Liakhovetski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201110200013.56428.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox