From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: Kota2 TPU LED platform data
Date: Tue, 22 Nov 2011 06:44:58 +0000 [thread overview]
Message-ID: <20111122064458.14516.21331.sendpatchset@w520> (raw)
In-Reply-To: <20110829035011.28202.37748.sendpatchset@rxone.opensource.se>
From: Magnus Damm <damm@opensource.se>
This patch updates the Kota2 board support code to
use the recently merged TPU LED driver whenever
possible.
The sh73a0 SoC has 5 TPU hardware blocks each with
4 timer channels which in theory allows a total of
20 LEDs to be controlled by "leds-renesas-tpu"
driver instances. The Kota2 board has 4 LEDs connected
to GPIO pins that also come with TPU pin functions, so
this patch ties up these 4 LEDS and leaves the remaining
3 LEDS for the GPIO based LED driver.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
Based on earlier submitted patch
"[PATCH] ARM: mach-shmobile: Kota2 TPU LED support V2"
arch/arm/mach-shmobile/board-kota2.c | 122 +++++++++++++++++++++++++++++++--
arch/arm/mach-shmobile/clock-sh73a0.c | 16 ++++
2 files changed, 134 insertions(+), 4 deletions(-)
--- 0005/arch/arm/mach-shmobile/board-kota2.c
+++ work/arch/arm/mach-shmobile/board-kota2.c 2011-11-22 15:42:09.000000000 +0900
@@ -33,6 +33,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mfd/tmio.h>
@@ -157,10 +158,6 @@ static struct platform_device gpio_keys_
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
- GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
- GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
- GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
@@ -179,6 +176,119 @@ static struct platform_device gpio_leds_
},
};
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+ .name = "V2513",
+ .pin_gpio_fn = GPIO_FN_TPU1TO2,
+ .pin_gpio = GPIO_PORT153,
+ .channel_offset = 0x90,
+ .timer_bit = 2,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+ [0] = {
+ .name = "TPU12",
+ .start = 0xe6610090,
+ .end = 0xe66100b5,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu12_device = {
+ .name = "leds-renesas-tpu",
+ .id = 12,
+ .dev = {
+ .platform_data = &led_renesas_tpu12_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu12_resources),
+ .resource = tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+ .name = "V2514",
+ .pin_gpio_fn = GPIO_FN_TPU4TO1,
+ .pin_gpio = GPIO_PORT199,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+ [0] = {
+ .name = "TPU41",
+ .start = 0xe6640050,
+ .end = 0xe6640075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu41_device = {
+ .name = "leds-renesas-tpu",
+ .id = 41,
+ .dev = {
+ .platform_data = &led_renesas_tpu41_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu41_resources),
+ .resource = tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+ .name = "V2515",
+ .pin_gpio_fn = GPIO_FN_TPU2TO1,
+ .pin_gpio = GPIO_PORT197,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+ [0] = {
+ .name = "TPU21",
+ .start = 0xe6620050,
+ .end = 0xe6620075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu21_device = {
+ .name = "leds-renesas-tpu",
+ .id = 21,
+ .dev = {
+ .platform_data = &led_renesas_tpu21_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu21_resources),
+ .resource = tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+ .name = "KEYLED",
+ .pin_gpio_fn = GPIO_FN_TPU3TO0,
+ .pin_gpio = GPIO_PORT163,
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+ [0] = {
+ .name = "TPU30",
+ .start = 0xe6630010,
+ .end = 0xe6630035,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu30_device = {
+ .name = "leds-renesas-tpu",
+ .id = 30,
+ .dev = {
+ .platform_data = &led_renesas_tpu30_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu30_resources),
+ .resource = tpu30_resources,
+};
+
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
@@ -291,6 +401,10 @@ static struct platform_device *kota2_dev
&keysc_device,
&gpio_keys_device,
&gpio_leds_device,
+ &leds_tpu12_device,
+ &leds_tpu41_device,
+ &leds_tpu21_device,
+ &leds_tpu30_device,
&mmcif_device,
&sdhi0_device,
&sdhi1_device,
--- 0004/arch/arm/mach-shmobile/clock-sh73a0.c
+++ work/arch/arm/mach-shmobile/clock-sh73a0.c 2011-11-22 15:38:14.000000000 +0900
@@ -113,6 +113,12 @@ static struct clk main_clk = {
.ops = &main_clk_ops,
};
+/* Divide Main clock by two */
+static struct clk main_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &main_clk,
+};
+
/* PLL0, PLL1, PLL2, PLL3 */
static unsigned long pll_recalc(struct clk *clk)
{
@@ -181,6 +187,7 @@ static struct clk *main_clks[] = {
&extal1_div2_clk,
&extal2_div2_clk,
&main_clk,
+ &main_div2_clk,
&pll0_clk,
&pll1_clk,
&pll2_clk,
@@ -268,6 +275,7 @@ enum { MSTP001,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
MSTP314, MSTP313, MSTP312, MSTP311,
+ MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
@@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+ [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+ [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+ [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+ [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
@@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
prev parent reply other threads:[~2011-11-22 6:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-29 3:50 [PATCH] ARM: mach-shmobile: Kota2 TPU LED support Magnus Damm
2011-08-29 4:59 ` [PATCH] ARM: mach-shmobile: Kota2 TPU LED support V2 Magnus Damm
2011-11-22 6:44 ` Magnus Damm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111122064458.14516.21331.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).