linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 05/05] ARM: mach-shmobile: Marzen LAN89218 support
Date: Tue, 13 Dec 2011 16:36:51 +0000	[thread overview]
Message-ID: <20111213163651.4096.91994.sendpatchset@w520> (raw)

From: Magnus Damm <damm@opensource.se>

Add LAN89218 support to the r8a7779 Marzen board.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/board-marzen.c |   36 +++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

--- 0022/arch/arm/mach-shmobile/board-marzen.c
+++ work/arch/arm/mach-shmobile/board-marzen.c	2011-12-14 00:12:32.000000000 +0900
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/smsc911x.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -37,7 +38,38 @@
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
+/* SMSC LAN89218 */
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x18000000, /* ExCS0 */
+		.end		= 0x180000ff, /* A1->A7 */
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= gic_spi(28), /* IRQ 1 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_platdata = {
+	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.dev  = {
+		.platform_data = &smsc911x_platdata,
+	},
+	.resource	= smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
+	&eth_device,
 };
 
 static struct map_desc marzen_io_desc[] __initdata = {
@@ -95,6 +127,10 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_TX4, NULL);
 	gpio_request(GPIO_FN_RX4, NULL);
 
+	/* LAN89218 */
+	gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
+	gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }

                 reply	other threads:[~2011-12-13 16:36 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111213163651.4096.91994.sendpatchset@w520 \
    --to=magnus.damm@gmail.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).