From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Tue, 28 Feb 2012 09:29:48 +0000 Subject: Re: [PATCH] mackerel: Do not enable TMU timer in default config Message-Id: <20120228092948.GA3138@verge.net.au> List-Id: References: <1329111377-15676-1-git-send-email-horms@verge.net.au> In-Reply-To: <1329111377-15676-1-git-send-email-horms@verge.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Tue, Feb 28, 2012 at 03:09:09PM +0900, Paul Mundt wrote: > On Tue, Feb 28, 2012 at 02:23:45AM +0100, Rafael J. Wysocki wrote: > > However, having looked at both sh_tmu and sh_cmt I don't see why the former > > should break things (during boot), while the latter doesn't, so I've done > > some more testing and, surprisingly enough, it turns out that disabling runtime > > PM in sh-sci makes the boot hang with sh_tmu enabled go away. So perhaps sh_tmu > > is just a messenger here and the real problem is with sh-sci. > > > > I think that more investigation is needed. > > > Do you see any different behaviour with early printk enabled vs disabled? > We did have the ordering issues before with the pm calls hanging or > oopsing in the early path, but all of those should have been fixed > already. There have been quite a few sh-sci changes though, so if it > worked previously it should be bisectable at least. Hi Paul, Hi Rafael, I asked Hiep-san (CCed) to see if there was any difference booting a 3.3-rc3 on a Mackerel without earlyprintk in the kernel commandline. I tested 3.3-rc5 as well. There does not seem to be any change in behaviour, other than that specificly relating the bootconsole. Without earlyprintk ... SuperH SCI(F) driver initialized sh-sci.0: ttySC0 at MMIO 0xe6c40000 (irq = 80) is a scifa sh-sci sh-sci.0: start latency exceeded, new value 6916 ns console [ttySC0] enabled [no more output] With earlyprintk ... SuperH SCI(F) driver initialized sh-sci.0: ttySC0 at MMIO 0xe6c40000 (irq = 80) is a scifa sh-sci sh-sci.0: start latency exceeded, new value 5917 ns console [ttySC0] enabled, bootconsole disabled console [ttySC0] enabled, bootconsole disabled [no more output]