From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 11/17] sh: sh2a sh_clk_ops rename
Date: Wed, 29 Feb 2012 13:17:32 +0000 [thread overview]
Message-ID: <20120229131732.29154.85086.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
Convert sh2a SoCs to use sh_clk_ops.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/sh/kernel/cpu/sh2a/clock-sh7201.c | 12 ++++++------
arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 12 ++++++------
arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 12 ++++++------
3 files changed, 18 insertions(+), 18 deletions(-)
--- 0001/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ work/arch/sh/kernel/cpu/sh2a/clock-sh7201.c 2012-02-29 20:49:02.000000000 +0900
@@ -30,7 +30,7 @@ static void master_clk_init(struct clk *
pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
-static struct clk_ops sh7201_master_clk_ops = {
+static struct sh_clk_ops sh7201_master_clk_ops = {
.init = master_clk_init,
};
@@ -40,7 +40,7 @@ static unsigned long module_clk_recalc(s
return clk->parent->rate / pfc_divisors[idx];
}
-static struct clk_ops sh7201_module_clk_ops = {
+static struct sh_clk_ops sh7201_module_clk_ops = {
.recalc = module_clk_recalc,
};
@@ -50,7 +50,7 @@ static unsigned long bus_clk_recalc(stru
return clk->parent->rate / pfc_divisors[idx];
}
-static struct clk_ops sh7201_bus_clk_ops = {
+static struct sh_clk_ops sh7201_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
@@ -60,18 +60,18 @@ static unsigned long cpu_clk_recalc(stru
return clk->parent->rate / ifc_divisors[idx];
}
-static struct clk_ops sh7201_cpu_clk_ops = {
+static struct sh_clk_ops sh7201_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
-static struct clk_ops *sh7201_clk_ops[] = {
+static struct sh_clk_ops *sh7201_clk_ops[] = {
&sh7201_master_clk_ops,
&sh7201_module_clk_ops,
&sh7201_bus_clk_ops,
&sh7201_cpu_clk_ops,
};
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
pll2_mult = 1;
--- 0001/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ work/arch/sh/kernel/cpu/sh2a/clock-sh7203.c 2012-02-29 20:50:04.000000000 +0900
@@ -32,7 +32,7 @@ static void master_clk_init(struct clk *
clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
}
-static struct clk_ops sh7203_master_clk_ops = {
+static struct sh_clk_ops sh7203_master_clk_ops = {
.init = master_clk_init,
};
@@ -42,7 +42,7 @@ static unsigned long module_clk_recalc(s
return clk->parent->rate / pfc_divisors[idx];
}
-static struct clk_ops sh7203_module_clk_ops = {
+static struct sh_clk_ops sh7203_module_clk_ops = {
.recalc = module_clk_recalc,
};
@@ -52,22 +52,22 @@ static unsigned long bus_clk_recalc(stru
return clk->parent->rate / pfc_divisors[idx-2];
}
-static struct clk_ops sh7203_bus_clk_ops = {
+static struct sh_clk_ops sh7203_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static struct clk_ops sh7203_cpu_clk_ops = {
+static struct sh_clk_ops sh7203_cpu_clk_ops = {
.recalc = followparent_recalc,
};
-static struct clk_ops *sh7203_clk_ops[] = {
+static struct sh_clk_ops *sh7203_clk_ops[] = {
&sh7203_master_clk_ops,
&sh7203_module_clk_ops,
&sh7203_bus_clk_ops,
&sh7203_cpu_clk_ops,
};
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN1))
pll2_mult = 4;
--- 0001/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ work/arch/sh/kernel/cpu/sh2a/clock-sh7206.c 2012-02-29 20:50:37.000000000 +0900
@@ -29,7 +29,7 @@ static void master_clk_init(struct clk *
clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
-static struct clk_ops sh7206_master_clk_ops = {
+static struct sh_clk_ops sh7206_master_clk_ops = {
.init = master_clk_init,
};
@@ -39,7 +39,7 @@ static unsigned long module_clk_recalc(s
return clk->parent->rate / pfc_divisors[idx];
}
-static struct clk_ops sh7206_module_clk_ops = {
+static struct sh_clk_ops sh7206_module_clk_ops = {
.recalc = module_clk_recalc,
};
@@ -48,7 +48,7 @@ static unsigned long bus_clk_recalc(stru
return clk->parent->rate / pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
-static struct clk_ops sh7206_bus_clk_ops = {
+static struct sh_clk_ops sh7206_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
@@ -58,18 +58,18 @@ static unsigned long cpu_clk_recalc(stru
return clk->parent->rate / ifc_divisors[idx];
}
-static struct clk_ops sh7206_cpu_clk_ops = {
+static struct sh_clk_ops sh7206_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
-static struct clk_ops *sh7206_clk_ops[] = {
+static struct sh_clk_ops *sh7206_clk_ops[] = {
&sh7206_master_clk_ops,
&sh7206_module_clk_ops,
&sh7206_bus_clk_ops,
&sh7206_cpu_clk_ops,
};
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
{
if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
pll2_mult = 1;
reply other threads:[~2012-02-29 13:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120229131732.29154.85086.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).