From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Fri, 11 May 2012 05:40:50 +0000 Subject: Re: [PATCH 0/2] ARM: mach-shmobile: KZM9G SMP support Message-Id: <20120511054046.GA17741@verge.net.au> List-Id: References: <87ehqspl59.wl%kuninori.morimoto.gx@renesas.com> In-Reply-To: <87ehqspl59.wl%kuninori.morimoto.gx@renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Thu, May 10, 2012 at 12:09:42AM -0700, Kuninori Morimoto wrote: > > Hi Rafael > Cc Simon, Magnus > > These are KZM9G SMP support patches > > Kuninori Morimoto (2): > mach-shmobile: sh73a0 SMP TWD boot regression fix > ARM: mach-shmobile: kzm9g: enable SMP boot > > These are based on Magnus's patches. > mach-shmobile: Invalidate caches when booting secondary cores > mach-shmobile: r8a7779 SMP TWD boot regression fix Hi Morimoto-san, I am having a little trouble with SMP on the kzm9g. I am using Rafael's renesas/next branch (5658c94), which includes all the patches above. The only local change I have is to add KZM-A9-GT to mach-types. Perhaps I need some other patches? Using the default config I do get a prompt, but I see the following along the way, multiple times. intc: Registered controller 'sh73a0-intcs' with 77 IRQs intc: Registered controller 'sh73a0-intca-irq-pins' with 32 IRQs intc: Registered controller 'sh73a0-pint0' with 32 IRQs intc: Registered controller 'sh73a0-pint1' with 8 IRQs ------------[ cut here ]------------ WARNING: at arch/arm/mach-shmobile/intc-sh73a0.c:450 sh73a0_init_irq+0x10c/0x1d0() Modules linked in: Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) r7:00000009 r6:000001c2 r5:c0394620 r4:00000000 [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_null+0x24/0x2c) r9:412fc098 r8:c0350121 r7:00000000 r6:c03e7128 r5:00000320 r4:00000011 [] (warn_slowpath_null+0x0/0x2c) from [] (sh73a0_init_irq+0x10c/0x1d0) [] (sh73a0_init_irq+0x0/0x1d0) from [] (init_IRQ+0x1c/0x24) [] (init_IRQ+0x0/0x24) from [] (start_kernel+0x198/0x2ac) [] (start_kernel+0x0/0x2ac) from [<41008040>] (0x41008040) r8:4100406a r7:c03c1b24 r6:c03aaa44 r5:c03be47c r4:10c5387d ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------