[GIT PULL] Renesas ARM-based platforms updates for v3.5

[GIT PULL] Renesas ARM-based platforms updates for v3.5

[Rafael J. Wysocki]

Hi,

Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3

    Linux 3.4-rc6

with top-most commit 5658c94096c16e769203b6dea5e5f04e7ff12633

    Merge branch 'renesas-kzm9g' into renesas-soc-new

from the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-new

to receive new Renesas ARM-based platforms material for v3.5.  Included are:

 * Urgent regression and SMP fixes (also included in the fixes branch that I've
   just sent a separate pull request for in the hope it is still possible to
   push them for v3.4).  Two of those fixes are duplicated in the renesas-sh7372
   branch, which is because I learned that they were fixes for recent
   regressions after they had gone to that branch.  Sorry about that.

 * Updates for boards based on the sh7372 and r8a7740 SoCs.

 * Support for 2 new boards, armadillo800eva and KZM-A9-GT.

Thanks!


 arch/arm/boot/dts/sh7372.dtsi                  |   21 +
 arch/arm/configs/armadillo800eva_defconfig     |  142 +++++
 arch/arm/configs/kzm9g_defconfig               |  139 +++++
 arch/arm/mach-shmobile/Kconfig                 |   16 +-
 arch/arm/mach-shmobile/Makefile                |    2 +
 arch/arm/mach-shmobile/board-ag5evm.c          |   22 +-
 arch/arm/mach-shmobile/board-ap4evb.c          |    2 +
 arch/arm/mach-shmobile/board-armadillo800eva.c |  778 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/board-bonito.c          |    2 +-
 arch/arm/mach-shmobile/board-kzm9g.c           |  454 ++++++++++++++
 arch/arm/mach-shmobile/board-mackerel.c        |   38 +-
 arch/arm/mach-shmobile/clock-r8a7740.c         |  128 ++++-
 arch/arm/mach-shmobile/headsmp.S               |   56 ++-
 arch/arm/mach-shmobile/include/mach/common.h   |    4 +-
 arch/arm/mach-shmobile/include/mach/intc.h     |   44 ++
 arch/arm/mach-shmobile/include/mach/irqs.h     |    2 +-
 arch/arm/mach-shmobile/include/mach/sh7372.h   |    2 +
 arch/arm/mach-shmobile/include/mach/sh73a0.h   |    3 +
 arch/arm/mach-shmobile/intc-sh7372.c           |   34 +-
 arch/arm/mach-shmobile/pfc-r8a7740.c           |   39 ++
 arch/arm/mach-shmobile/pfc-sh73a0.c            |    4 +-
 arch/arm/mach-shmobile/platsmp.c               |    2 +-
 arch/arm/mach-shmobile/setup-r8a7740.c         |   19 +-
 arch/arm/mach-shmobile/setup-r8a7779.c         |    4 +
 arch/arm/mach-shmobile/setup-sh7372.c          |   58 ++
 arch/arm/mach-shmobile/setup-sh73a0.c          |    4 +
 arch/arm/mach-shmobile/smp-r8a7779.c           |    8 +-
 arch/arm/mach-shmobile/smp-sh73a0.c            |    7 +-
 arch/arm/mach-shmobile/timer.c                 |   27 +-
 29 files changed, 1978 insertions(+), 83 deletions(-)

---------------

Bastian Hecht (1):
      ARM: sh-mobile: mackerel: Add error IRQ resource

Guennadi Liakhovetski (3):
      ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images
      ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
      ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper

Kuninori Morimoto (38):
      ARM: mach-shmobile: sh7372: Add FSI DMAEngine support
      ARM: mach-shmobile: mackerel: Add FSI DMAEngine support
      ARM: mach-shmobile: bonito: make sure static function
      ARM: mach-shmobile: r8a7740: add gpio_irq support
      ARM: mach-shmobile: add armadillo800eva board support.
      ARM: mach-shmobile: armadillo800eva: add defconfig
      ARM: mach-shmobile: armadillo800eva: add support LCDC0
      ARM: mach-shmobile: armadillo800eva: add support gpio_key
      ARM: mach-shmobile: armadillo800eva: add support sh_eth
      ARM: mach-shmobile: armadillo800eva: add support ST1232
      ARM: mach-shmobile: r8a7740: cleanup I2C workaround method
      ARM: mach-shmobile: clock-r8a7740: add FSI clock
      ARM: mach-shmobile: clock-r8a7740: add USB clock
      ARM: mach-shmobile: clock-r8a7740: add SDHI clock
      ARM: mach-shmobile: clock-r8a7740: add MMCIF clock
      ARM: mach-shmobile: armadillo800eva: add USB function support
      ARM: mach-shmobile: armadillo800eva: add SDHI0 support
      ARM: mach-shmobile: armadillo800eva: add SDHI1 support
      ARM: mach-shmobile: armadillo800eva: add MMCIF support
      ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer
      ARM: mach-shmobile: add KZM-A9-GT board support
      ARM: mach-shmobile: kzm9g: add defconfig
      ARM: mach-shmobile: kzm9g: add SMSC 9221 support
      ARM: mach-shmobile: kzm9g: add external USB Host support
      ARM: mach-shmobile: kzm9g: add LCDC support
      ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
      ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
      ARM: mach-shmobile: sh73a0.h: add GPIO_NR
      ARM: mach-shmobile: kzm9g: correct screen direction
      ARM: mach-shmobile: kzm9g: add MMCIF support
      ARM: mach-shmobile: kzm9g: add SDHI support
      ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
      ARM: mach-shmobile: clock-r8a7740: add sh-eth clock
      ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s
      ARM: mach-shmobile: kzm9g: defconfig update
      ARM: mach-shmobile: armadillo800eva: defconfig update
      ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
      ARM: mach-shmobile: kzm9g: enable SMP boot

Magnus Damm (9):
      ARM: mach-shmobile: Introduce shmobile_setup_delay()
      ARM: mach-shmobile: Introduce INTC_IRQ_PINS_16H
      ARM: mach-shmobile: Use 0x3400 as INTCS vector offset
      ARM: mach-shmobile: Use INTC_IRQ_PINS_16H on sh7372
      ARM: mach-shmobile: Rework sh7372 INTCS demuxer V2
      ARM: mach-shmobile: sh7372 generic board support via DT V2
      ARM / mach-shmobile: Use preset_lpj with calibrate_delay()
      ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
      ARM / mach-shmobile: Invalidate caches when booting secondary cores

Re: [GIT PULL] Renesas ARM-based platforms updates for v3.5

[Olof Johansson]

On Fri, May 11, 2012 at 12:01 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> Hi,
>
> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>
>    Linux 3.4-rc6
>
> with top-most commit 5658c94096c16e769203b6dea5e5f04e7ff12633
>
>    Merge branch 'renesas-kzm9g' into renesas-soc-new
>
> from the git repository at:
>
>  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-new
>
> to receive new Renesas ARM-based platforms material for v3.5.  Included are:
>
>  * Urgent regression and SMP fixes (also included in the fixes branch that I've
>   just sent a separate pull request for in the hope it is still possible to
>   push them for v3.4).  Two of those fixes are duplicated in the renesas-sh7372
>   branch, which is because I learned that they were fixes for recent
>   regressions after they had gone to that branch.  Sorry about that.
>
>  * Updates for boards based on the sh7372 and r8a7740 SoCs.
>
>  * Support for 2 new boards, armadillo800eva and KZM-A9-GT.

Hi Rafael,

If you take a look at how the other ARM subarch maintainers organize
the patches that they feed up to us, you'll see that they group them
either per functional topic, or more commonly per subject such as
"core soc updates", "soc driver updates", "board updates", "device
tree updates", "cleanup", and so on.

That fits the model we've been having on arm-soc as well, since we
split our tree up per category like that, and send those cross-section
branches between different vendors (but same categories) up to Linus
that way.


So, would you mind taking a look at what you have in the new-soc
branch and reshuffling things a bit? Looking at the history of the
new-soc branch and the rest of the repo, it seems that you're already
more or less organizing your tree the way I am asking for, it's just
that you merged them all together before sending this pull request.


Thanks!

-Olof

Re: [GIT PULL] Renesas ARM-based platforms updates for v3.5

[Rafael J. Wysocki]

On Saturday, May 12, 2012, Olof Johansson wrote:
> On Fri, May 11, 2012 at 12:01 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > Hi,
> >
> > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> >
> >    Linux 3.4-rc6
> >
> > with top-most commit 5658c94096c16e769203b6dea5e5f04e7ff12633
> >
> >    Merge branch 'renesas-kzm9g' into renesas-soc-new
> >
> > from the git repository at:
> >
> >  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-new
> >
> > to receive new Renesas ARM-based platforms material for v3.5.  Included are:
> >
> >  * Urgent regression and SMP fixes (also included in the fixes branch that I've
> >   just sent a separate pull request for in the hope it is still possible to
> >   push them for v3.4).  Two of those fixes are duplicated in the renesas-sh7372
> >   branch, which is because I learned that they were fixes for recent
> >   regressions after they had gone to that branch.  Sorry about that.
> >
> >  * Updates for boards based on the sh7372 and r8a7740 SoCs.
> >
> >  * Support for 2 new boards, armadillo800eva and KZM-A9-GT.
> 
> Hi Rafael,
> 
> If you take a look at how the other ARM subarch maintainers organize
> the patches that they feed up to us, you'll see that they group them
> either per functional topic, or more commonly per subject such as
> "core soc updates", "soc driver updates", "board updates", "device
> tree updates", "cleanup", and so on.
> 
> That fits the model we've been having on arm-soc as well, since we
> split our tree up per category like that, and send those cross-section
> branches between different vendors (but same categories) up to Linus
> that way.
> 
> 
> So, would you mind taking a look at what you have in the new-soc
> branch and reshuffling things a bit? Looking at the history of the
> new-soc branch and the rest of the repo, it seems that you're already
> more or less organizing your tree the way I am asking for, it's just
> that you merged them all together before sending this pull request.

Well.

I'd prefer not to rebase any branches and move commits around if that's
what you're talking about, because I have a rule that my branches are not
rebased, except for the next one.

Now, there are three categories of commits in the soc-new branch,
"core soc updates", "board updates" and "new board support".  However,
"board updates" depend on "core soc updates" and go together with them
in two branches, "sh7372" and "r8a7740" (branch names are after SoC names
and each branch contains updates for the given SoC and boards based on it).
I can send a pull request to you separately for each of those branches,
if you prefer, or I can merge them together and send a pull request for
the whole (it actually is a separate branch in my tree, called "soc").

The new board support stuff is just that - commits adding support for
new boards.  Those things, however, depend on the "core soc updates" and
"board updates", so they are based on the "soc" branch (honestly, I don't
think they will work without the "core" changes).  So, while I could
send separate pull requests for the "armadillo800eva" and "kzm9g" branches,
I don't think that merging them without the changes in the "soc" branch will
do any good.

Thanks,
Rafael

Re: [GIT PULL] Renesas ARM-based platforms updates for v3.5

[Rafael J. Wysocki]

On Saturday, May 12, 2012, Rafael J. Wysocki wrote:
> On Saturday, May 12, 2012, Olof Johansson wrote:
> > On Fri, May 11, 2012 at 12:01 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > > Hi,
> > >
> > > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> > >
> > >    Linux 3.4-rc6
> > >
> > > with top-most commit 5658c94096c16e769203b6dea5e5f04e7ff12633
> > >
> > >    Merge branch 'renesas-kzm9g' into renesas-soc-new
> > >
> > > from the git repository at:
> > >
> > >  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-new
> > >
> > > to receive new Renesas ARM-based platforms material for v3.5.  Included are:
> > >
> > >  * Urgent regression and SMP fixes (also included in the fixes branch that I've
> > >   just sent a separate pull request for in the hope it is still possible to
> > >   push them for v3.4).  Two of those fixes are duplicated in the renesas-sh7372
> > >   branch, which is because I learned that they were fixes for recent
> > >   regressions after they had gone to that branch.  Sorry about that.
> > >
> > >  * Updates for boards based on the sh7372 and r8a7740 SoCs.
> > >
> > >  * Support for 2 new boards, armadillo800eva and KZM-A9-GT.
> > 
> > Hi Rafael,
> > 
> > If you take a look at how the other ARM subarch maintainers organize
> > the patches that they feed up to us, you'll see that they group them
> > either per functional topic, or more commonly per subject such as
> > "core soc updates", "soc driver updates", "board updates", "device
> > tree updates", "cleanup", and so on.
> > 
> > That fits the model we've been having on arm-soc as well, since we
> > split our tree up per category like that, and send those cross-section
> > branches between different vendors (but same categories) up to Linus
> > that way.
> > 
> > 
> > So, would you mind taking a look at what you have in the new-soc
> > branch and reshuffling things a bit? Looking at the history of the
> > new-soc branch and the rest of the repo, it seems that you're already
> > more or less organizing your tree the way I am asking for, it's just
> > that you merged them all together before sending this pull request.
> 
> Well.
> 
> I'd prefer not to rebase any branches and move commits around if that's
> what you're talking about, because I have a rule that my branches are not
> rebased, except for the next one.

I will have to rebase the whole thing anyway because of the changes in
"fixes", so I think I'll just create new branches and send pull requests
again.

Thanks,
Rafael

Re: [GIT PULL] Renesas ARM-based platforms updates for v3.5

[Olof Johansson]

Hi,

On Sat, May 12, 2012 at 12:58 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Saturday, May 12, 2012, Olof Johansson wrote:
>> On Fri, May 11, 2012 at 12:01 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> > Hi,
>> >
>> > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>> >
>> >    Linux 3.4-rc6
>> >
>> > with top-most commit 5658c94096c16e769203b6dea5e5f04e7ff12633
>> >
>> >    Merge branch 'renesas-kzm9g' into renesas-soc-new
>> >
>> > from the git repository at:
>> >
>> >  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-new
>> >
>> > to receive new Renesas ARM-based platforms material for v3.5.  Included are:
>> >
>> >  * Urgent regression and SMP fixes (also included in the fixes branch that I've
>> >   just sent a separate pull request for in the hope it is still possible to
>> >   push them for v3.4).  Two of those fixes are duplicated in the renesas-sh7372
>> >   branch, which is because I learned that they were fixes for recent
>> >   regressions after they had gone to that branch.  Sorry about that.
>> >
>> >  * Updates for boards based on the sh7372 and r8a7740 SoCs.
>> >
>> >  * Support for 2 new boards, armadillo800eva and KZM-A9-GT.
>>
>> Hi Rafael,
>>
>> If you take a look at how the other ARM subarch maintainers organize
>> the patches that they feed up to us, you'll see that they group them
>> either per functional topic, or more commonly per subject such as
>> "core soc updates", "soc driver updates", "board updates", "device
>> tree updates", "cleanup", and so on.
>>
>> That fits the model we've been having on arm-soc as well, since we
>> split our tree up per category like that, and send those cross-section
>> branches between different vendors (but same categories) up to Linus
>> that way.
>>
>>
>> So, would you mind taking a look at what you have in the new-soc
>> branch and reshuffling things a bit? Looking at the history of the
>> new-soc branch and the rest of the repo, it seems that you're already
>> more or less organizing your tree the way I am asking for, it's just
>> that you merged them all together before sending this pull request.
>
> Well.
>
> I'd prefer not to rebase any branches and move commits around if that's
> what you're talking about, because I have a rule that my branches are not
> rebased, except for the next one.

Yeah, sorry for not giving you a heads up on this before. Hopefully
it's just a bootstrap issue this first merge window that you're
sending things through our tree.

> Now, there are three categories of commits in the soc-new branch,
> "core soc updates", "board updates" and "new board support".  However,
> "board updates" depend on "core soc updates" and go together with them
> in two branches, "sh7372" and "r8a7740" (branch names are after SoC names
> and each branch contains updates for the given SoC and boards based on it).
> I can send a pull request to you separately for each of those branches,
> if you prefer, or I can merge them together and send a pull request for
> the whole (it actually is a separate branch in my tree, called "soc").

In general we don't mind seeing each branch separately, and having
dependencies between them is perfectly fine. Other subarch trees do
this all the time. So having the core updates as a prereq (and
included in) the two SoC names is perfectly fine, the dependencies
will carry over to how we merge them into our next/* branches in
arm-soc.

> The new board support stuff is just that - commits adding support for
> new boards.  Those things, however, depend on the "core soc updates" and
> "board updates", so they are based on the "soc" branch (honestly, I don't
> think they will work without the "core" changes).  So, while I could
> send separate pull requests for the "armadillo800eva" and "kzm9g" branches,
> I don't think that merging them without the changes in the "soc" branch will
> do any good.

Again, that's fine. We have a "waterfall" of dependencies through the
arm-soc next/* branches and this will normally fit right in.

To see how we organize (and document) the branches we have pulled in,
take a look at arch/arm/arm-soc-for-next-contents.txt in the for-next
branch of the arm-soc tree:

http://git.kernel.org/?p=linux/kernel/git/arm/arm-soc.git;a=blob;f=arch/arm/arm-soc-for-next-contents.txt;hŒa6bef667fa81c355a0a9200804d20c16173f2d;hb=refs/heads/for-next

In general, the document is sorted such that the prerequisites for
later branches are listed above. In some cases it means that we need
to have more than one topic branch due to otherwise circular or
awkward dependencies, for example next/dt and next/dt2.


General organization and order tends to start out as:

* cleanups
* fixes
* device tree updates
* core soc support (new socs, etc)
* soc drivers and soc-related items. This time we split them up a bit
(pm, pinctrl, clock, drivers)
* boards (generally very limited new board introductions, mostly updates)

But over time order can be somewhat reshuffled due to added dependencies.


The for-next and next/* branches are not guaranteed to be stable,
since we have in the past had to drop branches and rebuild them. In
general, downstream developers should be basing their work on the
specific subarch trees and not on arm-soc. There are a few exceptions
for tree-wide cleanups but even then, basing it on regular mainline
makes much more sense.


-Olof

[GIT PULL] Renesas ARM-based platforms: core SoC updates for v3.5

[Rafael J. Wysocki]

Hi,

Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3

    Linux 3.4-rc6

with top-most commit c8241085e8606a14ef48e6d99556133c48aaddaf

    ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s

from the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-core

to receive updates of the Renesas ARM-based platforms core code for v3.5.
Included are:

 * Shared delay calibration code update from Magnus Damm.

 * The addition of FSI DMAEngine support for the sh7372 SoC from Kuninori Morimoto.

 * Muliple updates of the r8a7740 SoC support code from Kuninori Morimoto.

This is based on the Renesas DT updates that have been merged into arm-soc already
and on the urgent fixes I've sent a separate pull request for.

Thanks!


 arch/arm/boot/dts/sh7372.dtsi                |   21 +++++
 arch/arm/mach-shmobile/board-ag5evm.c        |   22 +----
 arch/arm/mach-shmobile/board-mackerel.c      |   22 +----
 arch/arm/mach-shmobile/clock-r8a7740.c       |  125 +++++++++++++++++++++++++-
 arch/arm/mach-shmobile/headsmp.S             |   56 +++++++++++-
 arch/arm/mach-shmobile/include/mach/common.h |    4 +-
 arch/arm/mach-shmobile/include/mach/intc.h   |   44 +++++++++
 arch/arm/mach-shmobile/include/mach/irqs.h   |    2 +-
 arch/arm/mach-shmobile/include/mach/sh7372.h |    2 +
 arch/arm/mach-shmobile/intc-sh7372.c         |   34 +++++---
 arch/arm/mach-shmobile/pfc-r8a7740.c         |   39 ++++++++
 arch/arm/mach-shmobile/setup-r8a7740.c       |   12 ++--
 arch/arm/mach-shmobile/setup-r8a7779.c       |    4 +
 arch/arm/mach-shmobile/setup-sh7372.c        |   58 ++++++++++++
 arch/arm/mach-shmobile/setup-sh73a0.c        |    4 +
 arch/arm/mach-shmobile/smp-r8a7779.c         |    8 ++-
 arch/arm/mach-shmobile/smp-sh73a0.c          |    7 ++-
 arch/arm/mach-shmobile/timer.c               |   27 ++++--
 18 files changed, 417 insertions(+), 74 deletions(-)

---------------

Guennadi Liakhovetski (2):
      ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
      ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper

Kuninori Morimoto (9):
      ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
      ARM: mach-shmobile: sh7372: Add FSI DMAEngine support
      ARM: mach-shmobile: r8a7740: add gpio_irq support
      ARM: mach-shmobile: r8a7740: cleanup I2C workaround method
      ARM: mach-shmobile: clock-r8a7740: add FSI clock
      ARM: mach-shmobile: clock-r8a7740: add USB clock
      ARM: mach-shmobile: clock-r8a7740: add SDHI clock
      ARM: mach-shmobile: clock-r8a7740: add MMCIF clock
      ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s

Magnus Damm (9):
      ARM: mach-shmobile: Introduce shmobile_setup_delay()
      ARM: mach-shmobile: Introduce INTC_IRQ_PINS_16H
      ARM: mach-shmobile: Use 0x3400 as INTCS vector offset
      ARM: mach-shmobile: Use INTC_IRQ_PINS_16H on sh7372
      ARM: mach-shmobile: Rework sh7372 INTCS demuxer V2
      ARM: mach-shmobile: sh7372 generic board support via DT V2
      ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
      ARM / mach-shmobile: Invalidate caches when booting secondary cores
      ARM / mach-shmobile: Use preset_lpj with calibrate_delay()

[GIT PULL] Renesas ARM-based platforms: board support updates for v3.5

[Rafael J. Wysocki]

Hi,

Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3

    Linux 3.4-rc6

with top-most commit 8823e2b38bd0ee45346ebd3613f47ddb2a3a208a

    ARM: mach-shmobile: bonito: make sure static function

from the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board

to receive updates of the Renesas ARM-based boards support code for v3.5.
Included are:

 * FSI DMAEngine support for the Mackerel board from Kuninori Morimoto.

 * sh7372 CEU extension for the Mackere and AP4EVB boards from Guennadi
   Liakhovetski.

 * Bonito board code fix from Kuninori Morimoto.

This is based on the Renesas core SoC code updates I've sent a separate pull
request for.

Thanks!


 arch/arm/mach-shmobile/board-ap4evb.c   |    2 ++
 arch/arm/mach-shmobile/board-bonito.c   |    2 +-
 arch/arm/mach-shmobile/board-mackerel.c |   10 ++++++++--
 3 files changed, 11 insertions(+), 3 deletions(-)

---------------

Guennadi Liakhovetski (1):
      ARM: mach-shmobile: sh7372 CEU supports up to 8188x8188 images

Kuninori Morimoto (2):
      ARM: mach-shmobile: mackerel: Add FSI DMAEngine support
      ARM: mach-shmobile: bonito: make sure static function

Re: [GIT PULL] Renesas ARM-based platforms: board support updates for v3.5

[Olof Johansson]

On Sat, May 12, 2012 at 2:18 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> Hi,
>
> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>
>    Linux 3.4-rc6
>
> with top-most commit 8823e2b38bd0ee45346ebd3613f47ddb2a3a208a
>
>    ARM: mach-shmobile: bonito: make sure static function
>
> from the git repository at:
>
>  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board

Thanks, pulled.


-Olof

[GIT PULL] Renesas ARM-based platforms: new boards support for v3.5

[Rafael J. Wysocki]

Hi,

Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3

    Linux 3.4-rc6

with top-most commit a515be1ca7df947db0f6018a174f49507affcdbc

    Merge branch 'renesas-kzm9g' into renesas-board-new

from the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new

to receive updates of the Renesas ARM-based boards support code for v3.5.
Included are:

 * Support for the KZM-A9-GT board from Kuninori Morimoto.

 * Support for the armadillo800eva board from Kuninori Morimoto.

This is based on the Renesas core SoC code updates I've sent a separate pull
request for.

Thanks!


 arch/arm/configs/armadillo800eva_defconfig     |  142 +++++
 arch/arm/configs/kzm9g_defconfig               |  139 +++++
 arch/arm/mach-shmobile/Kconfig                 |   16 +-
 arch/arm/mach-shmobile/Makefile                |    2 +
 arch/arm/mach-shmobile/board-armadillo800eva.c |  778 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/board-kzm9g.c           |  454 ++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7740.c         |    3 +
 arch/arm/mach-shmobile/include/mach/sh73a0.h   |    3 +
 arch/arm/mach-shmobile/pfc-sh73a0.c            |    4 +-
 arch/arm/mach-shmobile/platsmp.c               |    2 +-
 arch/arm/mach-shmobile/setup-r8a7740.c         |    7 +
 11 files changed, 1545 insertions(+), 5 deletions(-)

---------------

Kuninori Morimoto (27):
      ARM: mach-shmobile: add armadillo800eva board support.
      ARM: mach-shmobile: armadillo800eva: add defconfig
      ARM: mach-shmobile: armadillo800eva: add support LCDC0
      ARM: mach-shmobile: armadillo800eva: add support gpio_key
      ARM: mach-shmobile: armadillo800eva: add support sh_eth
      ARM: mach-shmobile: armadillo800eva: add support ST1232
      ARM: mach-shmobile: armadillo800eva: add USB function support
      ARM: mach-shmobile: armadillo800eva: add SDHI0 support
      ARM: mach-shmobile: armadillo800eva: add SDHI1 support
      ARM: mach-shmobile: armadillo800eva: add MMCIF support
      ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer
      ARM: mach-shmobile: clock-r8a7740: add sh-eth clock
      ARM: mach-shmobile: armadillo800eva: defconfig update
      ARM: mach-shmobile: add KZM-A9-GT board support
      ARM: mach-shmobile: kzm9g: add defconfig
      ARM: mach-shmobile: kzm9g: add SMSC 9221 support
      ARM: mach-shmobile: kzm9g: add external USB Host support
      ARM: mach-shmobile: kzm9g: add LCDC support
      ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
      ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
      ARM: mach-shmobile: sh73a0.h: add GPIO_NR
      ARM: mach-shmobile: kzm9g: correct screen direction
      ARM: mach-shmobile: kzm9g: add MMCIF support
      ARM: mach-shmobile: kzm9g: add SDHI support
      ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
      ARM: mach-shmobile: kzm9g: defconfig update
      ARM: mach-shmobile: kzm9g: enable SMP boot

Re: [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5

[Olof Johansson]

On Sat, May 12, 2012 at 2:23 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> Hi,
>
> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>
>    Linux 3.4-rc6
>
> with top-most commit a515be1ca7df947db0f6018a174f49507affcdbc
>
>    Merge branch 'renesas-kzm9g' into renesas-board-new
>
> from the git repository at:
>
>  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
>
> to receive updates of the Renesas ARM-based boards support code for v3.5.
> Included are:
>
>  * Support for the KZM-A9-GT board from Kuninori Morimoto.
>
>  * Support for the armadillo800eva board from Kuninori Morimoto.
>
> This is based on the Renesas core SoC code updates I've sent a separate pull
> request for.


Hi Rafael and Magnus,

I know Renesas is very active in adding support for new ARM platforms
upstream, and that's great. But we also need to figure out how it can
best be done while still keeping a bound on platform complexity.

This adds two new board files and two new defconfigs to the arm
subtree. We have in general said that we are OK with the occasional
new board file if the vendor is actively working on reducing the rest
of the subdirectory contents and consolidating over into device tree
based platforms. But we have also agreed that new (v7+) SoCs/boards
should be targeting DT board files from introduction nowadays.

Both these SoCs and boards seem to be A9-based, so they would match
that requirement.

The good news is that meeting the basic requirements for device tree
probing is easy; using a DT_MACHINE_START() stanza and adding a small
dts file is really all it takes for the real simple case. Building a
zImage with the device tree appended (and ARM_ATAG_DTB_COMPAT=y) means
you can use the same firmware as before and not modify it to handle
device trees, if that is a limitation you have for your environments.

Also, I would prefer to only see one or a couple of defconfigs that
can provide full build coverage for the various SoCs and boards, that
would contain the superset of the required drivers to boot the
supported boards, etc.

So, I'm going to hold off pulling in this branch right now until we
can sort out some of the above items.


Regards,

-Olof

Re: [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5

[Magnus Damm]

On Sun, May 13, 2012 at 3:29 PM, Olof Johansson <olof@lixom.net> wrote:
> On Sat, May 12, 2012 at 2:23 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> Hi,
>>
>> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>>
>>    Linux 3.4-rc6
>>
>> with top-most commit a515be1ca7df947db0f6018a174f49507affcdbc
>>
>>    Merge branch 'renesas-kzm9g' into renesas-board-new
>>
>> from the git repository at:
>>
>>  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
>>
>> to receive updates of the Renesas ARM-based boards support code for v3.5.
>> Included are:
>>
>>  * Support for the KZM-A9-GT board from Kuninori Morimoto.
>>
>>  * Support for the armadillo800eva board from Kuninori Morimoto.
>>
>> This is based on the Renesas core SoC code updates I've sent a separate pull
>> request for.
>
>
> Hi Rafael and Magnus,

Hej Olof!

> I know Renesas is very active in adding support for new ARM platforms
> upstream, and that's great. But we also need to figure out how it can
> best be done while still keeping a bound on platform complexity.
>
> This adds two new board files and two new defconfigs to the arm
> subtree. We have in general said that we are OK with the occasional
> new board file if the vendor is actively working on reducing the rest
> of the subdirectory contents and consolidating over into device tree
> based platforms. But we have also agreed that new (v7+) SoCs/boards
> should be targeting DT board files from introduction nowadays.
>
> Both these SoCs and boards seem to be A9-based, so they would match
> that requirement.

First of all, I'm glad to hear that you are positive to our work. This
means a lot to us. I personally agree with the DT direction and to
move things along we are multiple people working on improving both our
own situation (drivers, soc) and infrastructure that everyone in the
kernel community can use (PM, kexec). So I believe we are doing our
fair share there. At the same time we also need to provide some kind
of base code that is working as-is.

Regarding the new boards, you are correct that they are using Cortex
A9. I'm not sure if your policy considers other IP that is tied to the
ARM block, but in our case we have custom interrupt controllers. On
r8a7740 it's a A9 with our INTC used instead of the GIC, and on sh73a0
we make use of the GIC but we have our own cascaded interrupt
controllers. Unfortunately we don't have any long term DT solution
ready. I wrote a prototype myself to get other people started, but the
long term part is still being worked on by Paul Mundt - this since we
share the interrupt controller code with the SH architecture.

> The good news is that meeting the basic requirements for device tree
> probing is easy; using a DT_MACHINE_START() stanza and adding a small
> dts file is really all it takes for the real simple case. Building a
> zImage with the device tree appended (and ARM_ATAG_DTB_COMPAT=y) means
> you can use the same firmware as before and not modify it to handle
> device trees, if that is a limitation you have for your environments.

I'd be happy to add a DT_MACHINE_START() implementation for each SoC
if that make it easier for you guys to merge our code. From a
usability point of view, I'm quite certain that all our U-boot based
boards take uImages instead of zImage as kernel image format. I prefer
zImage myself, but unfortunately it is not my call.

I believe an uImage on ARM is basically a wrapped zImage.
Unfortunately I have not been able to find some simple way of
including DTB in the uImage. So to be able to use these kernels on our
existing boards that take uImage it seems that I will have to patch
the kernel locally somehow? I am fine using ARM_ATAG_DTB_COMPAT=y
during development - actually it is my preferred way - but I'm not so
comfortable asking our customers to patch their kernel source just to
be able to build an uImage.

Do you have any recommendation for me?

> Also, I would prefer to only see one or a couple of defconfigs that
> can provide full build coverage for the various SoCs and boards, that
> would contain the superset of the required drivers to boot the
> supported boards, etc.

I can check with my superiors if we can phase our sh7367 support. If
so then we have only A8 and A9 in tree which should be easy to support
with a single kernel configuration. Does that sound like something
that would simplify things for you?

> So, I'm going to hold off pulling in this branch right now until we
> can sort out some of the above items.

Ok. When can we retry?

Thanks,

/ magnus

Re: [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5

[Arnd Bergmann]

On Monday 14 May 2012, Magnus Damm wrote:
> > Also, I would prefer to only see one or a couple of defconfigs that
> > can provide full build coverage for the various SoCs and boards, that
> > would contain the superset of the required drivers to boot the
> > supported boards, etc.
> 
> I can check with my superiors if we can phase our sh7367 support. If
> so then we have only A8 and A9 in tree which should be easy to support
> with a single kernel configuration. Does that sound like something
> that would simplify things for you?

I think there is no need to go that far. Just providing a defconfig for
all boards that can already run a common image would be a good step
forward.

Is there a technical reason why you cannot build sh7367 together with
the ARMv7 based machines? Most other platforms that have both ARMv6 and
ARMv7 just build them together, you just can't combine them with any
ARMv4/v5 platform.

	Arnd

Re: [GIT PULL] Renesas ARM-based platforms: new boards support for v3.5

[Olof Johansson]

On Tue, May 15, 2012 at 12:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Monday 14 May 2012, Magnus Damm wrote:
>> > Also, I would prefer to only see one or a couple of defconfigs that
>> > can provide full build coverage for the various SoCs and boards, that
>> > would contain the superset of the required drivers to boot the
>> > supported boards, etc.
>>
>> I can check with my superiors if we can phase our sh7367 support. If
>> so then we have only A8 and A9 in tree which should be easy to support
>> with a single kernel configuration. Does that sound like something
>> that would simplify things for you?
>
> I think there is no need to go that far. Just providing a defconfig for
> all boards that can already run a common image would be a good step
> forward.
>
> Is there a technical reason why you cannot build sh7367 together with
> the ARMv7 based machines? Most other platforms that have both ARMv6 and
> ARMv7 just build them together, you just can't combine them with any
> ARMv4/v5 platform.

Sorry for the delay in answer, Magnus -- agree with Arnd here.

To clarify; I wasn't asking for you to remove the non-v7 platforms,
just to see if you could trim down the shmobile defconfigs to a
smaller number by creating a superset of the supported boards in one
or two configs.


-Olof

[GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Rafael J. Wysocki]

Hi,

Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3

    Linux 3.4-rc6

with top-most commit 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f

    Merge branch 'renesas-kzm9g' into renesas-board-new

from the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new

to receive updates of the Renesas ARM-based boards support code for v3.5.
Included are:

 * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.

 * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.

This is based on the Renesas core SoC code updates I've sent a separate pull
request for.

Thanks!


 arch/arm/boot/dts/r8a7740-armadillo800eva.dts  |   22 +
 arch/arm/boot/dts/sh73a0-kzm9g.dts             |   22 +
 arch/arm/configs/armadillo800eva_defconfig     |  142 +++++
 arch/arm/configs/kzm9g_defconfig               |  139 +++++
 arch/arm/mach-shmobile/Kconfig                 |   18 +-
 arch/arm/mach-shmobile/Makefile                |    2 +
 arch/arm/mach-shmobile/board-armadillo800eva.c |  784 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/board-kzm9g.c           |  460 ++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7740.c         |    3 +
 arch/arm/mach-shmobile/include/mach/sh73a0.h   |    3 +
 arch/arm/mach-shmobile/pfc-sh73a0.c            |    4 +-
 arch/arm/mach-shmobile/platsmp.c               |    2 +-
 arch/arm/mach-shmobile/setup-r8a7740.c         |    7 +
 13 files changed, 1603 insertions(+), 5 deletions(-)

---------------

Kuninori Morimoto (27):
      ARM: mach-shmobile: add armadillo800eva board support.
      ARM: mach-shmobile: armadillo800eva: add defconfig
      ARM: mach-shmobile: armadillo800eva: add support LCDC0
      ARM: mach-shmobile: armadillo800eva: add support gpio_key
      ARM: mach-shmobile: armadillo800eva: add support sh_eth
      ARM: mach-shmobile: armadillo800eva: add support ST1232
      ARM: mach-shmobile: armadillo800eva: add USB function support
      ARM: mach-shmobile: armadillo800eva: add SDHI0 support
      ARM: mach-shmobile: armadillo800eva: add SDHI1 support
      ARM: mach-shmobile: armadillo800eva: add MMCIF support
      ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer
      ARM: mach-shmobile: clock-r8a7740: add sh-eth clock
      ARM: mach-shmobile: armadillo800eva: defconfig update
      ARM: mach-shmobile: add KZM-A9-GT board support
      ARM: mach-shmobile: kzm9g: add defconfig
      ARM: mach-shmobile: kzm9g: add SMSC 9221 support
      ARM: mach-shmobile: kzm9g: add external USB Host support
      ARM: mach-shmobile: kzm9g: add LCDC support
      ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
      ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
      ARM: mach-shmobile: sh73a0.h: add GPIO_NR
      ARM: mach-shmobile: kzm9g: correct screen direction
      ARM: mach-shmobile: kzm9g: add MMCIF support
      ARM: mach-shmobile: kzm9g: add SDHI support
      ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
      ARM: mach-shmobile: kzm9g: defconfig update
      ARM: mach-shmobile: kzm9g: enable SMP boot

Magnus Damm (2):
      ARM: mach-shmobile: Use DT_MACHINE for KZM9G
      ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva

Re: [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Arnd Bergmann]

On Monday 14 May 2012, Rafael J. Wysocki wrote:
> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> 
>     Linux 3.4-rc6
> 
> with top-most commit 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f
> 
>     Merge branch 'renesas-kzm9g' into renesas-board-new
> 
> from the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
> 
> to receive updates of the Renesas ARM-based boards support code for v3.5.
> Included are:
> 
>  * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
> 
>  * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.
> 
> This is based on the Renesas core SoC code updates I've sent a separate pull
> request for.
> 

Pulled into next/boards

Thanks,

	Arnd

Re: [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Arnd Bergmann]

On Tuesday 15 May 2012, Arnd Bergmann wrote:
> On Monday 14 May 2012, Rafael J. Wysocki wrote:
> > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> > 
> >     Linux 3.4-rc6
> > 
> > with top-most commit 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f
> > 
> >     Merge branch 'renesas-kzm9g' into renesas-board-new
> > 
> > from the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
> > 
> > to receive updates of the Renesas ARM-based boards support code for v3.5.
> > Included are:
> > 
> >  * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
> > 
> >  * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.
> > 
> > This is based on the Renesas core SoC code updates I've sent a separate pull
> > request for.

I got build errors with the new version now because machine_is_kzm9g is no longer
defined:

/home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c: In function 'shmobile_smp_get_core_count':
/home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c:29:2: error: implicit declaration of function 'of_machine_is_compatible' [-Werror=implicit-function-declaration]

I'd apply the patch below, unless someone has a better solution

	Arnd

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index ed1bae5..bcb9119 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g";
+	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index d959f07..2946214 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -20,7 +20,8 @@
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || machine_is_kzm9g())
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
+			of_machine_is_compatible("renesas,sh73a0"))
 #define is_r8a7779() machine_is_marzen()
 
 static unsigned int __init shmobile_smp_get_core_count(void)

Re: [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Rafael J. Wysocki]

On Tuesday, May 15, 2012, Arnd Bergmann wrote:
> On Tuesday 15 May 2012, Arnd Bergmann wrote:
> > On Monday 14 May 2012, Rafael J. Wysocki wrote:
> > > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> > > 
> > >     Linux 3.4-rc6
> > > 
> > > with top-most commit 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f
> > > 
> > >     Merge branch 'renesas-kzm9g' into renesas-board-new
> > > 
> > > from the git repository at:
> > > 
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
> > > 
> > > to receive updates of the Renesas ARM-based boards support code for v3.5.
> > > Included are:
> > > 
> > >  * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
> > > 
> > >  * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.
> > > 
> > > This is based on the Renesas core SoC code updates I've sent a separate pull
> > > request for.
> 
> I got build errors with the new version now because machine_is_kzm9g is no longer
> defined:
> 
> /home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c: In function 'shmobile_smp_get_core_count':
> /home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c:29:2: error: implicit declaration of function 'of_machine_is_compatible' [-Werror=implicit-function-declaration]
> 
> I'd apply the patch below, unless someone has a better solution

Please apply and thanks for the fix!

Rafael


> diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
> index ed1bae5..bcb9119 100644
> --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
> +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
> @@ -13,7 +13,7 @@
>  
>  / {
>  	model = "KZM-A9-GT";
> -	compatible = "renesas,kzm9g";
> +	compatible = "renesas,kzm9g", "renesas,sh73a0";
>  
>  	memory {
>  		device_type = "memory";
> diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
> index d959f07..2946214 100644
> --- a/arch/arm/mach-shmobile/platsmp.c
> +++ b/arch/arm/mach-shmobile/platsmp.c
> @@ -20,7 +20,8 @@
>  #include <asm/mach-types.h>
>  #include <mach/common.h>
>  
> -#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || machine_is_kzm9g())
> +#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
> +			of_machine_is_compatible("renesas,sh73a0"))
>  #define is_r8a7779() machine_is_marzen()
>  
>  static unsigned int __init shmobile_smp_get_core_count(void)
> 
> 

Re: [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Arnd Bergmann]

On Tuesday 15 May 2012, Rafael J. Wysocki wrote:
> On Tuesday, May 15, 2012, Arnd Bergmann wrote:
> > On Tuesday 15 May 2012, Arnd Bergmann wrote:
> > > On Monday 14 May 2012, Rafael J. Wysocki wrote:
> > I got build errors with the new version now because machine_is_kzm9g is no longer
> > defined:
> > 
> > /home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c: In function 'shmobile_smp_get_core_count':
> > /home/arnd/linux-arm/arch/arm/mach-shmobile/platsmp.c:29:2: error: implicit declaration of function 'of_machine_is_compatible' [-Werror=implicit-function-declaration]
> > 
> > I'd apply the patch below, unless someone has a better solution
> 
> Please apply and thanks for the fix!
> 

Ok, applied now.

	Arnd

Re: [GIT PULL][Update] Renesas ARM-based platforms: new boards support for v3.5

[Rafael J. Wysocki]

On Tuesday, May 15, 2012, Arnd Bergmann wrote:
> On Monday 14 May 2012, Rafael J. Wysocki wrote:
> > Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
> > 
> >     Linux 3.4-rc6
> > 
> > with top-most commit 4fc5e65cdbf736a5311b07aa54a916ccaa91ab5f
> > 
> >     Merge branch 'renesas-kzm9g' into renesas-board-new
> > 
> > from the git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git board-new
> > 
> > to receive updates of the Renesas ARM-based boards support code for v3.5.
> > Included are:
> > 
> >  * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
> > 
> >  * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.
> > 
> > This is based on the Renesas core SoC code updates I've sent a separate pull
> > request for.
> > 
> 
> Pulled into next/boards

Many thanks!

Rafael

Re: [GIT PULL] Renesas ARM-based platforms: core SoC updates for v3.5

[Olof Johansson]

On Sat, May 12, 2012 at 2:07 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> Hi,
>
> Please pull changes since commit d48b97b403d23f6df0b990cee652bdf9a52337a3
>
>    Linux 3.4-rc6
>
> with top-most commit c8241085e8606a14ef48e6d99556133c48aaddaf
>
>    ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s
>
> from the git repository at:
>
>  git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc-core
>
> to receive updates of the Renesas ARM-based platforms core code for v3.5.
> Included are:
>
>  * Shared delay calibration code update from Magnus Damm.
>
>  * The addition of FSI DMAEngine support for the sh7372 SoC from Kuninori Morimoto.
>
>  * Muliple updates of the r8a7740 SoC support code from Kuninori Morimoto.
>
> This is based on the Renesas DT updates that have been merged into arm-soc already
> and on the urgent fixes I've sent a separate pull request for.
>
> Thanks!

Rafael,

This looks good, thanks for splitting things up. I will pull it in a
little later today when I get a few minutes of quiet.

If you start using signed tags, feel free to add the above description
into there for our convenience. :-)

Also, the diffstat below includes the dependent branches. Feel free to
send only the delta, but either way works.


-Olof