From mboxrd@z Thu Jan 1 00:00:00 1970 From: Magnus Damm Date: Wed, 16 May 2012 06:45:42 +0000 Subject: [PATCH 06/08] mach-shmobile: KZM9D board Ethernet support V3 Message-Id: <20120516064542.32286.45211.sendpatchset@w520> List-Id: References: <20120516064449.32286.77941.sendpatchset@w520> In-Reply-To: <20120516064449.32286.77941.sendpatchset@w520> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org From: Magnus Damm Tie in the on-board Ethernet controller on KZM9D and make use of the GPIO controller for external IRQ pin support. Signed-off-by: Magnus Damm --- Changes since V2: - none, just bumped up version to match the V3 series Changes from V1: - none - this is the first public release arch/arm/mach-shmobile/board-kzm9d.c | 44 +++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) --- 0009/arch/arm/mach-shmobile/board-kzm9d.c +++ work/arch/arm/mach-shmobile/board-kzm9d.c 2012-05-12 03:49:52.000000000 +0900 @@ -20,18 +20,60 @@ #include #include +#include +#include #include #include #include #include #include +/* Ether */ +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x2000ffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = EMEV2_GPIO_IRQ(1), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct smsc911x_platform_config smsc911x_platdata = { + .flags = SMSC911X_USE_32BIT, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, +}; + +static struct platform_device smsc91x_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc911x_platdata, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static struct platform_device *kzm9d_devices[] __initdata = { + &smsc91x_device, +}; + +void __init kzm9d_add_standard_devices(void) +{ + emev2_add_standard_devices(); + + platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices)); +} + MACHINE_START(KZM9D, "kzm9d") .map_io = emev2_map_io, .init_early = emev2_add_early_devices, .nr_irqs = NR_IRQS_LEGACY, .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, - .init_machine = emev2_add_standard_devices, + .init_machine = kzm9d_add_standard_devices, .timer = &shmobile_timer, MACHINE_END