From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH 01/27 v2] ARM: shmobile: sh73a0: bugfix: SY-DMAC number
Date: Wed, 20 Jun 2012 09:48:24 +0000 [thread overview]
Message-ID: <201206201148.24304.rjw@sisk.pl> (raw)
In-Reply-To: <8762awyiyf.wl%kuninori.morimoto.gx@renesas.com>
On Tuesday, June 12, 2012, Kuninori Morimoto wrote:
> 681e1b3eeb3606e06a7c4984e8058df84296f8bb
> (ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC)
> adds SY-DMAC, but it is 218, not 318
>
> This patch is based on v2.0 manual
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Applied to the fixes branch of the renesas.git tree.
Thanks,
Rafael
> ---
> v1 -> v2
> - no change
>
> arch/arm/mach-shmobile/clock-sh73a0.c | 8 ++++----
> 1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
> index 472d1f5..3946c4b 100644
> --- a/arch/arm/mach-shmobile/clock-sh73a0.c
> +++ b/arch/arm/mach-shmobile/clock-sh73a0.c
> @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = {
>
> enum { MSTP001,
> MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
> - MSTP219,
> + MSTP219, MSTP218,
> MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
> - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
> + MSTP331, MSTP329, MSTP325, MSTP323,
> MSTP314, MSTP313, MSTP312, MSTP311,
> MSTP303, MSTP302, MSTP301, MSTP300,
> MSTP411, MSTP410, MSTP403,
> @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = {
> [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
> [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
> [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
> + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
> [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
> [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
> [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
> @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = {
> [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
> [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
> [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
> - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
> [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
> [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
> [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
> @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
> CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
> CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
> + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
> CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
> CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
> CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
> @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = {
> CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
> CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
> CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
> - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
> CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
> CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
> CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
>
prev parent reply other threads:[~2012-06-20 9:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-12 9:31 [PATCH 01/27 v2] ARM: shmobile: sh73a0: bugfix: SY-DMAC number Kuninori Morimoto
2012-06-20 9:48 ` Rafael J. Wysocki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206201148.24304.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).