From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH] ARM: mach-shmobile: r8a7740 generic board support via DT
Date: Fri, 06 Jul 2012 19:18:26 +0000 [thread overview]
Message-ID: <201207062118.26438.rjw@sisk.pl> (raw)
In-Reply-To: <20120706080807.25490.53587.sendpatchset@w520>
On Friday, July 06, 2012, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
>
> Add generic DT board support for the r8a7740 SoC.
>
> SCIF serial ports and timers are kept as regular
> platform devices. Other on-chip and on-board devices
> should be configured via the device tree.
>
> At this point there is no interrupt controller support
> in place but such code will be added over time when
> proper IRQ domain support has been added to INTC.
>
> Signed-off-by: Magnus Damm <damm@opensource.se>
Applied to the r8a7740 branch of the renesas.git tree.
Thanks,
Rafael
> ---
>
> arch/arm/boot/dts/r8a7740.dtsi | 21 ++++++++++++++
> arch/arm/mach-shmobile/setup-r8a7740.c | 47 ++++++++++++++++++++++++++++++++
> 2 files changed, 68 insertions(+)
>
> --- /dev/null
> +++ work/arch/arm/boot/dts/r8a7740.dtsi 2012-07-06 16:44:11.000000000 +0900
> @@ -0,0 +1,21 @@
> +/*
> + * Device Tree Source for the r8a7740 SoC
> + *
> + * Copyright (C) 2012 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + compatible = "renesas,r8a7740";
> +
> + cpus {
> + cpu@0 {
> + compatible = "arm,cortex-a9";
> + };
> + };
> +};
> --- 0001/arch/arm/mach-shmobile/setup-r8a7740.c
> +++ work/arch/arm/mach-shmobile/setup-r8a7740.c 2012-07-06 16:51:47.000000000 +0900
> @@ -23,6 +23,7 @@
> #include <linux/init.h>
> #include <linux/io.h>
> #include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> #include <linux/serial_sci.h>
> #include <linux/sh_dma.h>
> #include <linux/sh_timer.h>
> @@ -694,3 +695,49 @@ void __init r8a7740_add_early_devices(vo
> /* override timer setup with soc-specific code */
> shmobile_timer.init = r8a7740_earlytimer_init;
> }
> +
> +#ifdef CONFIG_USE_OF
> +
> +void __init r8a7740_add_early_devices_dt(void)
> +{
> + shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
> +
> + early_platform_add_devices(r8a7740_early_devices,
> + ARRAY_SIZE(r8a7740_early_devices));
> +
> + /* setup early console here as well */
> + shmobile_setup_console();
> +}
> +
> +static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
> + { }
> +};
> +
> +void __init r8a7740_add_standard_devices_dt(void)
> +{
> + /* clocks are setup late during boot in the case of DT */
> + r8a7740_clock_init(0);
> +
> + platform_add_devices(r8a7740_early_devices,
> + ARRAY_SIZE(r8a7740_early_devices));
> +
> + of_platform_populate(NULL, of_default_bus_match_table,
> + r8a7740_auxdata_lookup, NULL);
> +}
> +
> +static const char *r8a7740_boards_compat_dt[] __initdata = {
> + "renesas,r8a7740",
> + NULL,
> +};
> +
> +DT_MACHINE_START(SH7372_DT, "Generic R8A7740 (Flattened Device Tree)")
> + .map_io = r8a7740_map_io,
> + .init_early = r8a7740_add_early_devices_dt,
> + .init_irq = r8a7740_init_irq,
> + .handle_irq = shmobile_handle_irq_intc,
> + .init_machine = r8a7740_add_standard_devices_dt,
> + .timer = &shmobile_timer,
> + .dt_compat = r8a7740_boards_compat_dt,
> +MACHINE_END
> +
> +#endif /* CONFIG_USE_OF */
>
>
prev parent reply other threads:[~2012-07-06 19:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 8:08 [PATCH] ARM: mach-shmobile: r8a7740 generic board support via DT Magnus Damm
2012-07-06 19:18 ` Rafael J. Wysocki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207062118.26438.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox