From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] Renesas ARM-based SoCs updates for v3.5
Date: Sat, 14 Jul 2012 13:31:09 +0000 [thread overview]
Message-ID: <201207141531.09545.rjw@sisk.pl> (raw)
In-Reply-To: <201207141529.21534.rjw@sisk.pl>
The subject should be "Renesas ARM-based SoCs updates for v3.6", sorry for
the mistake. The message body is correct.
On Saturday, July 14, 2012, Rafael J. Wysocki wrote:
> Hi,
>
> Please pull changes since commit 485802a6c524e62b5924849dd727ddbb1497cc71
>
> Linux 3.5-rc3
>
> with top-most commit 0df8fa46611abc56e39f541495d667e4bf4f1060
>
> Merge branch 'renesas-sh7377' into renesas-soc
>
> from the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas.git soc
>
> to receive updates for Renesas ARM-based SoCs for v3.6. Included are:
>
> * Updates for the r8a7740, sh73a0 and sh7372 SoCs from Kuninori Morimoto.
> * Low-level power management code reorganization from Kuninori Morimoto.
> * Wakeup signaling rework for sh7372 and DT support bits for r8a7740 and
> sh7377 from Magnus Damm.
> * Assorted fixes.
>
> This branch also includes fixes based on top of v3.5-rc3 that have been
> already merged into arm-soc and mainline, which are not listed below.
>
> Thanks!
>
>
> arch/arm/boot/dts/r8a7740.dtsi | 21 ++
> arch/arm/boot/dts/sh7377.dtsi | 21 ++
> arch/arm/mach-shmobile/Kconfig | 1 +
> arch/arm/mach-shmobile/Makefile | 2 +
> arch/arm/mach-shmobile/board-ap4evb.c | 16 +-
> arch/arm/mach-shmobile/board-armadillo800eva.c | 1 +
> arch/arm/mach-shmobile/board-mackerel.c | 24 +-
> arch/arm/mach-shmobile/clock-r8a7740.c | 150 ++++++++-
> arch/arm/mach-shmobile/clock-r8a7779.c | 2 +-
> arch/arm/mach-shmobile/clock-sh7367.c | 2 +-
> arch/arm/mach-shmobile/clock-sh7372.c | 2 +-
> arch/arm/mach-shmobile/clock-sh7377.c | 2 +-
> arch/arm/mach-shmobile/clock-sh73a0.c | 12 +-
> arch/arm/mach-shmobile/include/mach/common.h | 1 +
> arch/arm/mach-shmobile/include/mach/dma-register.h | 84 +++++
> arch/arm/mach-shmobile/include/mach/gpio.h | 32 ++
> arch/arm/mach-shmobile/include/mach/pm-rmobile.h | 44 +++
> arch/arm/mach-shmobile/include/mach/r8a7740.h | 33 +-
> arch/arm/mach-shmobile/include/mach/sh7372.h | 45 +--
> arch/arm/mach-shmobile/include/mach/sh73a0.h | 7 +
> arch/arm/mach-shmobile/intc-r8a7740.c | 13 +-
> arch/arm/mach-shmobile/pfc-r8a7740.c | 24 +-
> arch/arm/mach-shmobile/pm-r8a7740.c | 54 ++++
> arch/arm/mach-shmobile/pm-rmobile.c | 167 ++++++++++
> arch/arm/mach-shmobile/pm-sh7372.c | 297 +++++------------
> arch/arm/mach-shmobile/setup-r8a7740.c | 360 +++++++++++++++++++++
> arch/arm/mach-shmobile/setup-sh7372.c | 209 +++++-------
> arch/arm/mach-shmobile/setup-sh7377.c | 47 +++
> arch/arm/mach-shmobile/setup-sh73a0.c | 152 +++++++--
> 29 files changed, 1383 insertions(+), 442 deletions(-)
>
> ---------------
>
> Kuninori Morimoto (28):
> ARM: shmobile: r8a7740: add HDMI interrupt support
> ARM: shmobile: r8a7740: add HDMI clock support
> ARM: shmobile: r8a7740: add HDMI GPIO support
> ARM: shmobile: r8a7740: add MERAM work-around
> ARM: shmobile: r8a7740: add CEU clock support
> ARM: shmobile: r8a7740: add FSI parent clock support
> ARM: shmobile: r8a7740: add FSI-B (for HDMI) GPIO support
> ARM: shmobile: sh73a0: add FSI clock
> ARM: shmobile: sh7372: remove unused sh7372_a3sp_init() on !CONFIG_PM
> ARM: shmobile: add common extra gpio functions
> ARM: shmobile: add common DMAEngine definitions
> ARM: shmobile: r8a7740: add DMAEngine support for FSI
> ARM: shmobile: r8a7740: add DMAEngine support for SDHI
> ARM: shmobile: r8a7740: add DMAEngine support for USB
> ARM: shmobile: use common DMAEngine definitions on r8a7740
> ARM: shmobile: sh73a0: add USB clock support
> ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
> ARM: shmobile: use common DMAEngine definitions on sh73a0
> ARM: shmobile: use common DMAEngine definitions on sh7372
> ARM: shmobile: soc-core: add R-mobile PM domain common APIs
> ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
> ARM: shmobile: r8a7740: add A4S pm domain support
> ARM: shmobile: r8a7740: add A3SP pm domain support
> ARM: shmobile: r8a7740: add A4LC pm domain support
> ARM: shmobile: sh7372: add pm-rmobile domain support
> ARM: shmobile: mackerel: switch to using pm-rmobile API
> ARM: shmobile: ap4evb: switch to using pm-rmobile API
> ARM: shmobile: sh7372: completely switch over to using pm-rmobile API
>
> Magnus Damm (5):
> ARM: shmobile: Use INTCA with sh7372 A3SM power domain
> ARM: shmobile: sh7372 A3SM CPUIdle support
> ARM: mach-shmobile: r8a7740 generic board support via DT
> ARM: mach-shmobile: sh7377 generic board support via DT
> ARM: shmobile: Take cpuidle dependencies into account correctly
>
> Nobuhiro Iwamatsu (1):
> ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
>
> Rafael J. Wysocki (1):
> ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
next prev parent reply other threads:[~2012-07-14 13:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-11 21:38 ARM / mach-shmobile v3.6 pull requests preparation Rafael J. Wysocki
2012-07-14 13:29 ` [GIT PULL] Renesas ARM-based SoCs updates for v3.5 Rafael J. Wysocki
2012-07-14 13:31 ` Rafael J. Wysocki [this message]
2012-07-14 13:34 ` [GIT PULL] Renesas ARM-based boards updates for v3.6 Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207141531.09545.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).