From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Fri, 30 Nov 2012 09:02:39 +0000 Subject: Re: [PATCH] mmc: sh_mobile_sdhi: fix clock frequency printing Message-Id: <20121130090238.GH4501@verge.net.au> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guennadi Liakhovetski Cc: linux-mmc@vger.kernel.org, linux-sh@vger.kernel.org, Chris Ball On Wed, Nov 28, 2012 at 10:24:13AM +0100, Guennadi Liakhovetski wrote: > During its probing the SDHI driver prints out the clock frequency, but > does it wrongly, always reporting 0Hz. Use the MMC host frequency value > to fix this issue. > > Signed-off-by: Guennadi Liakhovetski Reviewed-by: Simon Horman > --- > drivers/mmc/host/sh_mobile_sdhi.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c > index 22ac8e7..d6ff853 100644 > --- a/drivers/mmc/host/sh_mobile_sdhi.c > +++ b/drivers/mmc/host/sh_mobile_sdhi.c > @@ -248,7 +248,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) > dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n", > mmc_hostname(host->mmc), (unsigned long) > (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), > - mmc_data->hclk / 1000000); > + host->mmc->f_max / 1000000); > > return ret; > > -- > 1.7.2.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >