From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-sh@vger.kernel.org, johnstul@us.ibm.com,
horms@verge.net.au, shinya.kuribayashi.px@renesas.com,
tglx@linutronix.de, Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 05/08] clocksource: sh_cmt: CMSTR and CMCSR register access update
Date: Fri, 14 Dec 2012 05:54:10 +0000 [thread overview]
Message-ID: <20121214055410.10081.32594.sendpatchset@w520> (raw)
In-Reply-To: <20121214055323.10081.12056.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Update hardware register access code for CMSTR and CMCSR
from using sh_cmt_read() and sh_cmt_write() to make use
of 16-bit register access functions such as sh_cmt_read16()
and sh_cmt_write16(). Also update sh_cmt_read() and
sh_cmt_write() now when the special cases are gone.
This patch moves us one step closer to the goal of separating
counter register access functions from control control register
functions.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/clocksource/sh_cmt.c | 66 +++++++++++++++++++-----------------------
1 file changed, 30 insertions(+), 36 deletions(-)
--- 0005/drivers/clocksource/sh_cmt.c
+++ work/drivers/clocksource/sh_cmt.c 2012-12-14 12:58:01.000000000 +0900
@@ -56,44 +56,46 @@ struct sh_cmt_priv {
bool cs_enabled;
};
-static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
+static inline unsigned long sh_cmt_read16(void __iomem *base,
+ unsigned long offs)
+{
+ return ioread16(base + (offs << 1));
+}
+
+static inline void sh_cmt_write16(void __iomem *base, unsigned long offs,
+ unsigned long value)
+{
+ iowrite16(value, base + (offs << 1));
+}
-#define CMSTR -1 /* shared register */
#define CMCSR 0 /* channel register */
#define CMCNT 1 /* channel register */
#define CMCOR 2 /* channel register */
static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
{
- struct sh_timer_config *cfg = p->pdev->dev.platform_data;
void __iomem *base = p->mapbase;
- unsigned long offs;
+ unsigned long offs = reg_nr;
- if (reg_nr = CMSTR) {
- offs = 0;
- base -= cfg->channel_offset;
- } else
- offs = reg_nr;
-
- if (p->width = 16)
+ if (p->width = 16) {
offs <<= 1;
- else {
+ return ioread16(base + offs);
+ } else {
offs <<= 2;
- if ((reg_nr = CMCNT) || (reg_nr = CMCOR))
- return ioread32(base + offs);
+ return ioread32(base + offs);
}
-
- return ioread16(base + offs);
}
static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
{
- return sh_cmt_read(p, CMSTR);
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+
+ return sh_cmt_read16(p->mapbase - cfg->channel_offset, 0);
}
static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)
{
- return sh_cmt_read(p, CMCSR);
+ return sh_cmt_read16(p->mapbase, CMCSR);
}
static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
@@ -104,39 +106,30 @@ static inline unsigned long sh_cmt_read_
static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
unsigned long value)
{
- struct sh_timer_config *cfg = p->pdev->dev.platform_data;
void __iomem *base = p->mapbase;
- unsigned long offs;
-
- if (reg_nr = CMSTR) {
- offs = 0;
- base -= cfg->channel_offset;
- } else
- offs = reg_nr;
+ unsigned long offs = reg_nr;
- if (p->width = 16)
+ if (p->width = 16) {
offs <<= 1;
- else {
+ iowrite16(value, base + offs);
+ } else {
offs <<= 2;
- if ((reg_nr = CMCNT) || (reg_nr = CMCOR)) {
- iowrite32(value, base + offs);
- return;
- }
+ iowrite32(value, base + offs);
}
-
- iowrite16(value, base + offs);
}
static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
unsigned long value)
{
- sh_cmt_write(p, CMSTR, value);
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+
+ sh_cmt_write16(p->mapbase - cfg->channel_offset, 0, value);
}
static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,
unsigned long value)
{
- sh_cmt_write(p, CMCSR, value);
+ sh_cmt_write16(p->mapbase, CMCSR, value);
}
static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p,
@@ -173,6 +166,7 @@ static unsigned long sh_cmt_get_counter(
return v2;
}
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
{
next prev parent reply other threads:[~2012-12-14 5:54 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-14 5:53 [PATCH 00/08] clocksource: sh_cmt: CMT driver update Magnus Damm
2012-12-14 5:53 ` [PATCH 01/08] clocksource: sh_cmt: Take care of clk_put() when setup_irq() fails Magnus Damm
2012-12-14 5:53 ` [PATCH 02/08] clocksource: sh_cmt: Initialize 'max_match_value' and 'lock' in sh_cmt_setup() Magnus Damm
2012-12-14 5:53 ` [PATCH 03/08] clocksource: sh_cmt: Consolidate platform_set_drvdata() call Magnus Damm
2012-12-14 5:54 ` [PATCH 04/08] clocksource: sh_cmt: Introduce per-register functions Magnus Damm
2012-12-14 5:54 ` Magnus Damm [this message]
2012-12-14 5:54 ` [PATCH 06/08] clocksource: sh_cmt: CMCNT and CMCOR register access update Magnus Damm
2012-12-14 5:54 ` [PATCH 07/08] clocksource: sh_cmt: Add control register callbacks Magnus Damm
2012-12-14 5:54 ` [PATCH 08/08] clocksource: sh_cmt: Add CMT register layout comment Magnus Damm
2012-12-19 17:57 ` [PATCH 00/08] clocksource: sh_cmt: CMT driver update John Stultz
2013-02-13 9:45 ` Guennadi Liakhovetski
2013-02-13 10:54 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121214055410.10081.32594.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=horms@verge.net.au \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=shinya.kuribayashi.px@renesas.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).