* [PATCH v4 00/81] SH pin control and GPIO rework
@ 2012-12-28 22:53 Laurent Pinchart
2012-12-30 0:12 ` Simon Horman
0 siblings, 1 reply; 6+ messages in thread
From: Laurent Pinchart @ 2012-12-28 22:53 UTC (permalink / raw)
To: linux-sh
Hi everybody,
Here's the fourth version of the SH pin control and GPIO rework patches. The
patches have been rebased on top of v3.8-rc1 but are otherwise unchanged.
The series starts with the same additional platform-specific fixes as v3
(patches 4 to 7), I would appreciate if someone could review them carefully.
You can get the series from my git tree at
git://linuxtv.org/pinchartl/fbdev.git pinmux
I would like to push this set to v3.9 independently of the later rework and
OF-related sets. Simon, can you take it in your tree ?
Changes since v3:
- Rebased on top ov v3.8-rc1
Changes since v2:
- Update to latest mainline tree master branch
- Rename marks to match GPIO names
- Fix GPIOs data for sh7757, sh7786 and shx3 platforms
- Remove __devinit/__devexit
- Use devm_* managed memory allocation and mapping functions
- Use the sh_pfc_ prefix for structures and functions
- Update module authors
- Drop OF support and related DT patches
Changes since v1:
- Split SoC changes in one patch per SoC to make backporting easier
- Dropped SH7267 and SH7277 changes as support for those SoCs will be removed
from the kernel
- Removed the sh_pfc_register() function on ARM
- Added OF support for PFC instantiation and GPIO bindings
- Added PFC DT nodes for the Mackerel and KZM9G boards
- Added GPIO LEDs DT nodes for the KZM9G board
Laurent Pinchart (81):
sh: sh7264: Rename CRX0CRX1 mark to match GPIO names
sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names
sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD
sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries
sh: sh7786: Fix port E, G and J GPIOs
sh: sh7786: Fix last GPIO index
sh: shx3: Fix last GPIO index
sh-pfc: Remove all use of __devinit/__devexit
sh-pfc: Split platform data from the sh_pfc structure
sh-pfc: Move private definitions and declarations to private header
sh-pfc: Merge PFC core and pinctrl
sh-pfc: Merge PFC core and gpio
sh-pfc: Move platform device and driver to the core
sh-pfc: Use devm_kzalloc()
sh-pfc: Use devm_ioremap_nocache()
sh-pfc: Let the compiler decide whether to inline functions
sh-pfc: Remove check for impossible error condition
sh-pfc: Sort headers alphabetically
sh-pfc: Use sh_pfc_ namespace prefix through the whole driver
sh-pfc: Split platform device and platform driver registration
sh-pfc: Support passing resources through platform device
ARM: shmobile: Select PINCTRL
ARM: shmobile: r8a7740: Register PFC platform device
ARM: shmobile: r8a7779: Register PFC platform device
ARM: shmobile: sh7372: Register PFC platform device
ARM: shmobile: sh73a0: Register PFC platform device
ARM: shmobile: r8a7740: Add pin control resources
ARM: shmobile: sh7372: Add pin control resources
ARM: shmobile: sh73a0: Add pin control resources
sh: Add PFC platform device registration helper function
sh: sh7203: Register PFC platform device
sh: sh7264: Register PFC platform device
sh: sh7269: Register PFC platform device
sh: sh7720: Register PFC platform device
sh: sh7722: Register PFC platform device
sh: sh7723: Register PFC platform device
sh: sh7724: Register PFC platform device
sh: sh7734: Register PFC platform device
sh: sh7757: Register PFC platform device
sh: sh7785: Register PFC platform device
sh: sh7786: Register PFC platform device
sh: shx3: Register PFC platform device
sh-pfc: Remove platform device registration
sh-pfc: Remove unused resource and num_resources platform data fields
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/
sh-pfc: Support pinmux info in driver data instead of platform data
sh-pfc: Add r8a7740 pinmux support
sh-pfc: Add r8a7779 pinmux support
sh-pfc: Add sh7372 pinmux support
sh-pfc: Add sh73a0 pinmux support
ARM: shmobile: r8a7740: Use driver-provided pinmux info
ARM: shmobile: r8a7779: Use driver-provided pinmux info
ARM: shmobile: sh7372: Use driver-provided pinmux info
ARM: shmobile: sh73a0: Use driver-provided pinmux info
sh-pfc: Add sh7203 pinmux support
sh-pfc: Add sh7264 pinmux support
sh-pfc: Add sh7269 pinmux support
sh-pfc: Add sh7720 pinmux support
sh-pfc: Add sh7722 pinmux support
sh-pfc: Add sh7723 pinmux support
sh-pfc: Add sh7724 pinmux support
sh-pfc: Add sh7734 pinmux support
sh-pfc: Add sh7757 pinmux support
sh-pfc: Add sh7785 pinmux support
sh-pfc: Add sh7786 pinmux support
sh-pfc: Add shx3 pinmux support
sh: sh7203: pinmux: Use driver-provided pinmux info
sh: sh7264: pinmux: Use driver-provided pinmux info
sh: sh7269: pinmux: Use driver-provided pinmux info
sh: sh7720: pinmux: Use driver-provided pinmux info
sh: sh7722: pinmux: Use driver-provided pinmux info
sh: sh7723: pinmux: Use driver-provided pinmux info
sh: sh7724: pinmux: Use driver-provided pinmux info
sh: sh7734: pinmux: Use driver-provided pinmux info
sh: sh7757: pinmux: Use driver-provided pinmux info
sh: sh7785: pinmux: Use driver-provided pinmux info
sh: sh7786: pinmux: Use driver-provided pinmux info
sh: shx3: pinmux: Use driver-provided pinmux info
sh: Remove unused sh_pfc_register_info() function
sh-pfc: Remove pinmux_info definition
sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
arch/arm/Kconfig | 1 +
arch/arm/mach-shmobile/Makefile | 8 -
arch/arm/mach-shmobile/setup-r8a7740.c | 26 +
arch/arm/mach-shmobile/setup-r8a7779.c | 25 +
arch/arm/mach-shmobile/setup-sh7372.c | 26 +
arch/arm/mach-shmobile/setup-sh73a0.c | 25 +
arch/sh/Kconfig | 12 +
arch/sh/include/asm/gpio.h | 2 +-
arch/sh/include/cpu-common/cpu/pfc.h | 26 +
arch/sh/include/cpu-sh4/cpu/sh7723.h | 2 +-
arch/sh/include/cpu-sh4/cpu/sh7786.h | 8 +-
arch/sh/kernel/cpu/Makefile | 2 +-
arch/sh/kernel/cpu/pfc.c | 33 +
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 1582 +-----------
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 2121 +---------------
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2823 +-------------------
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 1226 +---------
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1778 +------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1893 +-------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 2210 +---------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 2470 +-----------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2267 +----------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 1294 +---------
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 822 +------
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 573 +----
drivers/pinctrl/Kconfig | 2 +-
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/sh-pfc/Kconfig | 116 +
drivers/pinctrl/sh-pfc/Makefile | 21 +
drivers/{sh/pfc => pinctrl/sh-pfc}/core.c | 355 ++-
drivers/pinctrl/sh-pfc/core.h | 72 +
drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c | 114 +-
.../pinctrl/sh-pfc}/pfc-r8a7740.c | 11 +-
.../pinctrl/sh-pfc}/pfc-r8a7779.c | 29 +-
drivers/pinctrl/sh-pfc/pfc-sh7203.c | 1592 +++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7264.c | 2131 +++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2834 ++++++++++++++++++++
.../pinctrl/sh-pfc}/pfc-sh7372.c | 11 +-
.../pinctrl/sh-pfc}/pfc-sh73a0.c | 11 +-
drivers/pinctrl/sh-pfc/pfc-sh7720.c | 1236 +++++++++
drivers/pinctrl/sh-pfc/pfc-sh7722.c | 1779 ++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7723.c | 1903 +++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7724.c | 2225 +++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2475 +++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7757.c | 2282 ++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7785.c | 1304 +++++++++
drivers/pinctrl/sh-pfc/pfc-sh7786.c | 837 ++++++
drivers/pinctrl/sh-pfc/pfc-shx3.c | 582 ++++
drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c | 170 +-
{include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h | 43 +-
drivers/sh/Kconfig | 1 -
drivers/sh/Makefile | 1 -
drivers/sh/pfc/Kconfig | 26 -
drivers/sh/pfc/Makefile | 3 -
54 files changed, 21899 insertions(+), 21524 deletions(-)
create mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
create mode 100644 arch/sh/kernel/cpu/pfc.c
create mode 100644 drivers/pinctrl/sh-pfc/Kconfig
create mode 100644 drivers/pinctrl/sh-pfc/Makefile
rename drivers/{sh/pfc => pinctrl/sh-pfc}/core.c (50%)
create mode 100644 drivers/pinctrl/sh-pfc/core.h
rename drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c (57%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7740.c (99%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7779.c (99%)
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7203.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7264.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7269.c
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh7372.c (99%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh73a0.c (99%)
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7720.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7722.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7723.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7724.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7734.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7757.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7785.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7786.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-shx3.c
rename drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c (73%)
rename {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h (83%)
delete mode 100644 drivers/sh/pfc/Kconfig
delete mode 100644 drivers/sh/pfc/Makefile
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v4 00/81] SH pin control and GPIO rework 2012-12-28 22:53 [PATCH v4 00/81] SH pin control and GPIO rework Laurent Pinchart @ 2012-12-30 0:12 ` Simon Horman 2013-01-03 16:40 ` Laurent Pinchart 0 siblings, 1 reply; 6+ messages in thread From: Simon Horman @ 2012-12-30 0:12 UTC (permalink / raw) To: linux-arm-kernel [ CC: linux-arm-kernel, Olof Johansson, Arnd Bergmann ] On Fri, Dec 28, 2012 at 11:53:42PM +0100, Laurent Pinchart wrote: > Hi everybody, > > Here's the fourth version of the SH pin control and GPIO rework patches. The > patches have been rebased on top of v3.8-rc1 but are otherwise unchanged. > > The series starts with the same additional platform-specific fixes as v3 > (patches 4 to 7), I would appreciate if someone could review them carefully. > > You can get the series from my git tree at > > git://linuxtv.org/pinchartl/fbdev.git pinmux > > I would like to push this set to v3.9 independently of the later rework and > OF-related sets. Simon, can you take it in your tree ? Sure. One inconvenience of my tree is that it goes via the arm-soc tree and as such things need to be split out into branches. I believe in the case of this series the patches will need to be split across soc, board and pfc branches. The branches may be based on each other. Do you think the following scheme might work: Patches 1 - 7: sh-soc Patches 8 - 21: pfc, based on sh-soc Patches 22 - 29: soc (ARM SoC), based on pfc Patches 30 - 42: sh-soc2, based on pfc Patches 43 - 50: pfc2, based on a merge of soc and sh-soc2 Patches 51 - 54: soc2 (ARM SoC), based on pfc2 Patches 55 - 66: pfc3, based on soc2 Patches 67 - 78: sh-soc3, based on pfc3 Patches 79 - 81: pfc4, based on sh-soc3 An alternative is to place all the changes in a single branch as they form a logical set of changes. Anrd, Olof, do you have any opinions on the best way forward? > > Changes since v3: > > - Rebased on top ov v3.8-rc1 > > Changes since v2: > > - Update to latest mainline tree master branch > - Rename marks to match GPIO names > - Fix GPIOs data for sh7757, sh7786 and shx3 platforms > - Remove __devinit/__devexit > - Use devm_* managed memory allocation and mapping functions > - Use the sh_pfc_ prefix for structures and functions > - Update module authors > - Drop OF support and related DT patches > > Changes since v1: > > - Split SoC changes in one patch per SoC to make backporting easier > - Dropped SH7267 and SH7277 changes as support for those SoCs will be removed > from the kernel > - Removed the sh_pfc_register() function on ARM > - Added OF support for PFC instantiation and GPIO bindings > - Added PFC DT nodes for the Mackerel and KZM9G boards > - Added GPIO LEDs DT nodes for the KZM9G board > > Laurent Pinchart (81): > sh: sh7264: Rename CRX0CRX1 mark to match GPIO names > sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names > sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD > sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries > sh: sh7786: Fix port E, G and J GPIOs > sh: sh7786: Fix last GPIO index > sh: shx3: Fix last GPIO index > sh-pfc: Remove all use of __devinit/__devexit > sh-pfc: Split platform data from the sh_pfc structure > sh-pfc: Move private definitions and declarations to private header > sh-pfc: Merge PFC core and pinctrl > sh-pfc: Merge PFC core and gpio > sh-pfc: Move platform device and driver to the core > sh-pfc: Use devm_kzalloc() > sh-pfc: Use devm_ioremap_nocache() > sh-pfc: Let the compiler decide whether to inline functions > sh-pfc: Remove check for impossible error condition > sh-pfc: Sort headers alphabetically > sh-pfc: Use sh_pfc_ namespace prefix through the whole driver > sh-pfc: Split platform device and platform driver registration > sh-pfc: Support passing resources through platform device > ARM: shmobile: Select PINCTRL > ARM: shmobile: r8a7740: Register PFC platform device > ARM: shmobile: r8a7779: Register PFC platform device > ARM: shmobile: sh7372: Register PFC platform device > ARM: shmobile: sh73a0: Register PFC platform device > ARM: shmobile: r8a7740: Add pin control resources > ARM: shmobile: sh7372: Add pin control resources > ARM: shmobile: sh73a0: Add pin control resources > sh: Add PFC platform device registration helper function > sh: sh7203: Register PFC platform device > sh: sh7264: Register PFC platform device > sh: sh7269: Register PFC platform device > sh: sh7720: Register PFC platform device > sh: sh7722: Register PFC platform device > sh: sh7723: Register PFC platform device > sh: sh7724: Register PFC platform device > sh: sh7734: Register PFC platform device > sh: sh7757: Register PFC platform device > sh: sh7785: Register PFC platform device > sh: sh7786: Register PFC platform device > sh: shx3: Register PFC platform device > sh-pfc: Remove platform device registration > sh-pfc: Remove unused resource and num_resources platform data fields > sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ > sh-pfc: Support pinmux info in driver data instead of platform data > sh-pfc: Add r8a7740 pinmux support > sh-pfc: Add r8a7779 pinmux support > sh-pfc: Add sh7372 pinmux support > sh-pfc: Add sh73a0 pinmux support > ARM: shmobile: r8a7740: Use driver-provided pinmux info > ARM: shmobile: r8a7779: Use driver-provided pinmux info > ARM: shmobile: sh7372: Use driver-provided pinmux info > ARM: shmobile: sh73a0: Use driver-provided pinmux info > sh-pfc: Add sh7203 pinmux support > sh-pfc: Add sh7264 pinmux support > sh-pfc: Add sh7269 pinmux support > sh-pfc: Add sh7720 pinmux support > sh-pfc: Add sh7722 pinmux support > sh-pfc: Add sh7723 pinmux support > sh-pfc: Add sh7724 pinmux support > sh-pfc: Add sh7734 pinmux support > sh-pfc: Add sh7757 pinmux support > sh-pfc: Add sh7785 pinmux support > sh-pfc: Add sh7786 pinmux support > sh-pfc: Add shx3 pinmux support > sh: sh7203: pinmux: Use driver-provided pinmux info > sh: sh7264: pinmux: Use driver-provided pinmux info > sh: sh7269: pinmux: Use driver-provided pinmux info > sh: sh7720: pinmux: Use driver-provided pinmux info > sh: sh7722: pinmux: Use driver-provided pinmux info > sh: sh7723: pinmux: Use driver-provided pinmux info > sh: sh7724: pinmux: Use driver-provided pinmux info > sh: sh7734: pinmux: Use driver-provided pinmux info > sh: sh7757: pinmux: Use driver-provided pinmux info > sh: sh7785: pinmux: Use driver-provided pinmux info > sh: sh7786: pinmux: Use driver-provided pinmux info > sh: shx3: pinmux: Use driver-provided pinmux info > sh: Remove unused sh_pfc_register_info() function > sh-pfc: Remove pinmux_info definition > sh-pfc: Move sh_pfc.h from include/linux/ to driver directory > > arch/arm/Kconfig | 1 + > arch/arm/mach-shmobile/Makefile | 8 - > arch/arm/mach-shmobile/setup-r8a7740.c | 26 + > arch/arm/mach-shmobile/setup-r8a7779.c | 25 + > arch/arm/mach-shmobile/setup-sh7372.c | 26 + > arch/arm/mach-shmobile/setup-sh73a0.c | 25 + > arch/sh/Kconfig | 12 + > arch/sh/include/asm/gpio.h | 2 +- > arch/sh/include/cpu-common/cpu/pfc.h | 26 + > arch/sh/include/cpu-sh4/cpu/sh7723.h | 2 +- > arch/sh/include/cpu-sh4/cpu/sh7786.h | 8 +- > arch/sh/kernel/cpu/Makefile | 2 +- > arch/sh/kernel/cpu/pfc.c | 33 + > arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 1582 +----------- > arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 2121 +--------------- > arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2823 +------------------- > arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 1226 +--------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1778 +------------ > arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1893 +------------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 2210 +--------------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 2470 +----------------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2267 +---------------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 1294 +--------- > arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 822 +------ > arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 573 +---- > drivers/pinctrl/Kconfig | 2 +- > drivers/pinctrl/Makefile | 2 + > drivers/pinctrl/sh-pfc/Kconfig | 116 + > drivers/pinctrl/sh-pfc/Makefile | 21 + > drivers/{sh/pfc => pinctrl/sh-pfc}/core.c | 355 ++- > drivers/pinctrl/sh-pfc/core.h | 72 + > drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c | 114 +- > .../pinctrl/sh-pfc}/pfc-r8a7740.c | 11 +- > .../pinctrl/sh-pfc}/pfc-r8a7779.c | 29 +- > drivers/pinctrl/sh-pfc/pfc-sh7203.c | 1592 +++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7264.c | 2131 +++++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2834 ++++++++++++++++++++ > .../pinctrl/sh-pfc}/pfc-sh7372.c | 11 +- > .../pinctrl/sh-pfc}/pfc-sh73a0.c | 11 +- > drivers/pinctrl/sh-pfc/pfc-sh7720.c | 1236 +++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7722.c | 1779 ++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7723.c | 1903 +++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7724.c | 2225 +++++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2475 +++++++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7757.c | 2282 ++++++++++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7785.c | 1304 +++++++++ > drivers/pinctrl/sh-pfc/pfc-sh7786.c | 837 ++++++ > drivers/pinctrl/sh-pfc/pfc-shx3.c | 582 ++++ > drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c | 170 +- > {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h | 43 +- > drivers/sh/Kconfig | 1 - > drivers/sh/Makefile | 1 - > drivers/sh/pfc/Kconfig | 26 - > drivers/sh/pfc/Makefile | 3 - > 54 files changed, 21899 insertions(+), 21524 deletions(-) > create mode 100644 arch/sh/include/cpu-common/cpu/pfc.h > create mode 100644 arch/sh/kernel/cpu/pfc.c > create mode 100644 drivers/pinctrl/sh-pfc/Kconfig > create mode 100644 drivers/pinctrl/sh-pfc/Makefile > rename drivers/{sh/pfc => pinctrl/sh-pfc}/core.c (50%) > create mode 100644 drivers/pinctrl/sh-pfc/core.h > rename drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c (57%) > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7740.c (99%) > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7779.c (99%) > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7203.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7264.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7269.c > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh7372.c (99%) > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh73a0.c (99%) > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7720.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7722.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7723.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7724.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7734.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7757.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7785.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7786.c > create mode 100644 drivers/pinctrl/sh-pfc/pfc-shx3.c > rename drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c (73%) > rename {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h (83%) > delete mode 100644 drivers/sh/pfc/Kconfig > delete mode 100644 drivers/sh/pfc/Makefile > > -- > Regards, > > Laurent Pinchart > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 00/81] SH pin control and GPIO rework 2012-12-30 0:12 ` Simon Horman @ 2013-01-03 16:40 ` Laurent Pinchart 2013-01-07 3:03 ` Simon Horman 0 siblings, 1 reply; 6+ messages in thread From: Laurent Pinchart @ 2013-01-03 16:40 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, On Sunday 30 December 2012 09:12:02 Simon Horman wrote: > [ CC: linux-arm-kernel, Olof Johansson, Arnd Bergmann ] > > On Fri, Dec 28, 2012 at 11:53:42PM +0100, Laurent Pinchart wrote: > > Hi everybody, > > > > Here's the fourth version of the SH pin control and GPIO rework patches. > > The patches have been rebased on top of v3.8-rc1 but are otherwise > > unchanged. > > > > The series starts with the same additional platform-specific fixes as v3 > > (patches 4 to 7), I would appreciate if someone could review them > > carefully. > > > > You can get the series from my git tree at > > > > git://linuxtv.org/pinchartl/fbdev.git pinmux > > > > I would like to push this set to v3.9 independently of the later rework > > and OF-related sets. Simon, can you take it in your tree ? > > Sure. > > One inconvenience of my tree is that it goes via the arm-soc tree and as > such things need to be split out into branches. I believe in the case of > this series the patches will need to be split across soc, board and pfc > branches. The branches may be based on each other. > > Do you think the following scheme might work: > > Patches 1 - 7: sh-soc > Patches 8 - 21: pfc, based on sh-soc > Patches 22 - 29: soc (ARM SoC), based on pfc > Patches 30 - 42: sh-soc2, based on pfc > Patches 43 - 50: pfc2, based on a merge of soc and sh-soc2 > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > Patches 55 - 66: pfc3, based on soc2 > Patches 67 - 78: sh-soc3, based on pfc3 > Patches 79 - 81: pfc4, based on sh-soc3 That looks good to me. Alternatively you could base pfc3 on top of a merge of soc and sh-soc2, and base pfc4 on top of a merge of soc2 and sh-soc3, but you might get conflicts in Kconfig and Makefile (they should be trivial to solve though). > An alternative is to place all the changes in a single branch > as they form a logical set of changes. Anrd, Olof, do you have any opinions > on the best way forward? > > > Changes since v3: > > > > - Rebased on top ov v3.8-rc1 > > > > Changes since v2: > > > > - Update to latest mainline tree master branch > > - Rename marks to match GPIO names > > - Fix GPIOs data for sh7757, sh7786 and shx3 platforms > > - Remove __devinit/__devexit > > - Use devm_* managed memory allocation and mapping functions > > - Use the sh_pfc_ prefix for structures and functions > > - Update module authors > > - Drop OF support and related DT patches > > > > Changes since v1: > > > > - Split SoC changes in one patch per SoC to make backporting easier > > - Dropped SH7267 and SH7277 changes as support for those SoCs will be > > removed from the kernel > > - Removed the sh_pfc_register() function on ARM > > - Added OF support for PFC instantiation and GPIO bindings > > - Added PFC DT nodes for the Mackerel and KZM9G boards > > - Added GPIO LEDs DT nodes for the KZM9G board > > > > Laurent Pinchart (81): > > sh: sh7264: Rename CRX0CRX1 mark to match GPIO names > > sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names > > sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD > > sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries > > sh: sh7786: Fix port E, G and J GPIOs > > sh: sh7786: Fix last GPIO index > > sh: shx3: Fix last GPIO index > > sh-pfc: Remove all use of __devinit/__devexit > > sh-pfc: Split platform data from the sh_pfc structure > > sh-pfc: Move private definitions and declarations to private header > > sh-pfc: Merge PFC core and pinctrl > > sh-pfc: Merge PFC core and gpio > > sh-pfc: Move platform device and driver to the core > > sh-pfc: Use devm_kzalloc() > > sh-pfc: Use devm_ioremap_nocache() > > sh-pfc: Let the compiler decide whether to inline functions > > sh-pfc: Remove check for impossible error condition > > sh-pfc: Sort headers alphabetically > > sh-pfc: Use sh_pfc_ namespace prefix through the whole driver > > sh-pfc: Split platform device and platform driver registration > > sh-pfc: Support passing resources through platform device > > ARM: shmobile: Select PINCTRL > > ARM: shmobile: r8a7740: Register PFC platform device > > ARM: shmobile: r8a7779: Register PFC platform device > > ARM: shmobile: sh7372: Register PFC platform device > > ARM: shmobile: sh73a0: Register PFC platform device > > ARM: shmobile: r8a7740: Add pin control resources > > ARM: shmobile: sh7372: Add pin control resources > > ARM: shmobile: sh73a0: Add pin control resources > > sh: Add PFC platform device registration helper function > > sh: sh7203: Register PFC platform device > > sh: sh7264: Register PFC platform device > > sh: sh7269: Register PFC platform device > > sh: sh7720: Register PFC platform device > > sh: sh7722: Register PFC platform device > > sh: sh7723: Register PFC platform device > > sh: sh7724: Register PFC platform device > > sh: sh7734: Register PFC platform device > > sh: sh7757: Register PFC platform device > > sh: sh7785: Register PFC platform device > > sh: sh7786: Register PFC platform device > > sh: shx3: Register PFC platform device > > sh-pfc: Remove platform device registration > > sh-pfc: Remove unused resource and num_resources platform data fields > > sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/ > > sh-pfc: Support pinmux info in driver data instead of platform data > > sh-pfc: Add r8a7740 pinmux support > > sh-pfc: Add r8a7779 pinmux support > > sh-pfc: Add sh7372 pinmux support > > sh-pfc: Add sh73a0 pinmux support > > ARM: shmobile: r8a7740: Use driver-provided pinmux info > > ARM: shmobile: r8a7779: Use driver-provided pinmux info > > ARM: shmobile: sh7372: Use driver-provided pinmux info > > ARM: shmobile: sh73a0: Use driver-provided pinmux info > > sh-pfc: Add sh7203 pinmux support > > sh-pfc: Add sh7264 pinmux support > > sh-pfc: Add sh7269 pinmux support > > sh-pfc: Add sh7720 pinmux support > > sh-pfc: Add sh7722 pinmux support > > sh-pfc: Add sh7723 pinmux support > > sh-pfc: Add sh7724 pinmux support > > sh-pfc: Add sh7734 pinmux support > > sh-pfc: Add sh7757 pinmux support > > sh-pfc: Add sh7785 pinmux support > > sh-pfc: Add sh7786 pinmux support > > sh-pfc: Add shx3 pinmux support > > sh: sh7203: pinmux: Use driver-provided pinmux info > > sh: sh7264: pinmux: Use driver-provided pinmux info > > sh: sh7269: pinmux: Use driver-provided pinmux info > > sh: sh7720: pinmux: Use driver-provided pinmux info > > sh: sh7722: pinmux: Use driver-provided pinmux info > > sh: sh7723: pinmux: Use driver-provided pinmux info > > sh: sh7724: pinmux: Use driver-provided pinmux info > > sh: sh7734: pinmux: Use driver-provided pinmux info > > sh: sh7757: pinmux: Use driver-provided pinmux info > > sh: sh7785: pinmux: Use driver-provided pinmux info > > sh: sh7786: pinmux: Use driver-provided pinmux info > > sh: shx3: pinmux: Use driver-provided pinmux info > > sh: Remove unused sh_pfc_register_info() function > > sh-pfc: Remove pinmux_info definition > > sh-pfc: Move sh_pfc.h from include/linux/ to driver directory > > > > arch/arm/Kconfig | 1 + > > arch/arm/mach-shmobile/Makefile | 8 - > > arch/arm/mach-shmobile/setup-r8a7740.c | 26 + > > arch/arm/mach-shmobile/setup-r8a7779.c | 25 + > > arch/arm/mach-shmobile/setup-sh7372.c | 26 + > > arch/arm/mach-shmobile/setup-sh73a0.c | 25 + > > arch/sh/Kconfig | 12 + > > arch/sh/include/asm/gpio.h | 2 +- > > arch/sh/include/cpu-common/cpu/pfc.h | 26 + > > arch/sh/include/cpu-sh4/cpu/sh7723.h | 2 +- > > arch/sh/include/cpu-sh4/cpu/sh7786.h | 8 +- > > arch/sh/kernel/cpu/Makefile | 2 +- > > arch/sh/kernel/cpu/pfc.c | 33 + > > arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 1582 +----------- > > arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 2121 +-------------- > > arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2823 +-------------- > > arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 1226 +--------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1778 +------------ > > arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1893 +------------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 2210 +-------------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 2470 +-------------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2267 +-------------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 1294 +--------- > > arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 822 +------ > > arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 573 +---- > > drivers/pinctrl/Kconfig | 2 +- > > drivers/pinctrl/Makefile | 2 + > > drivers/pinctrl/sh-pfc/Kconfig | 116 + > > drivers/pinctrl/sh-pfc/Makefile | 21 + > > drivers/{sh/pfc => pinctrl/sh-pfc}/core.c | 355 ++- > > drivers/pinctrl/sh-pfc/core.h | 72 + > > drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c | 114 +- > > .../pinctrl/sh-pfc}/pfc-r8a7740.c | 11 +- > > .../pinctrl/sh-pfc}/pfc-r8a7779.c | 29 +- > > drivers/pinctrl/sh-pfc/pfc-sh7203.c | 1592 +++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7264.c | 2131 +++++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2834 +++++++++++++++ > > .../pinctrl/sh-pfc}/pfc-sh7372.c | 11 +- > > .../pinctrl/sh-pfc}/pfc-sh73a0.c | 11 +- > > drivers/pinctrl/sh-pfc/pfc-sh7720.c | 1236 +++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7722.c | 1779 ++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7723.c | 1903 +++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7724.c | 2225 +++++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2475 +++++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7757.c | 2282 +++++++++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7785.c | 1304 +++++++++ > > drivers/pinctrl/sh-pfc/pfc-sh7786.c | 837 ++++++ > > drivers/pinctrl/sh-pfc/pfc-shx3.c | 582 ++++ > > drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c | 170 +- > > {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h | 43 +- > > drivers/sh/Kconfig | 1 - > > drivers/sh/Makefile | 1 - > > drivers/sh/pfc/Kconfig | 26 - > > drivers/sh/pfc/Makefile | 3 - > > 54 files changed, 21899 insertions(+), 21524 deletions(-) > > create mode 100644 arch/sh/include/cpu-common/cpu/pfc.h > > create mode 100644 arch/sh/kernel/cpu/pfc.c > > create mode 100644 drivers/pinctrl/sh-pfc/Kconfig > > create mode 100644 drivers/pinctrl/sh-pfc/Makefile > > rename drivers/{sh/pfc => pinctrl/sh-pfc}/core.c (50%) > > create mode 100644 drivers/pinctrl/sh-pfc/core.h > > rename drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c (57%) > > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7740.c > > (99%) rename {arch/arm/mach-shmobile => > > drivers/pinctrl/sh-pfc}/pfc-r8a7779.c (99%) create mode 100644 > > drivers/pinctrl/sh-pfc/pfc-sh7203.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7264.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7269.c > > rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh7372.c > > (99%) rename {arch/arm/mach-shmobile => > > drivers/pinctrl/sh-pfc}/pfc-sh73a0.c (99%) create mode 100644 > > drivers/pinctrl/sh-pfc/pfc-sh7720.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7722.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7723.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7724.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7734.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7757.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7785.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7786.c > > create mode 100644 drivers/pinctrl/sh-pfc/pfc-shx3.c > > rename drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c (73%) > > rename {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h (83%) > > delete mode 100644 drivers/sh/pfc/Kconfig > > delete mode 100644 drivers/sh/pfc/Makefile -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 00/81] SH pin control and GPIO rework 2013-01-03 16:40 ` Laurent Pinchart @ 2013-01-07 3:03 ` Simon Horman 2013-01-07 19:33 ` Laurent Pinchart 0 siblings, 1 reply; 6+ messages in thread From: Simon Horman @ 2013-01-07 3:03 UTC (permalink / raw) To: linux-arm-kernel On Thu, Jan 03, 2013 at 05:40:47PM +0100, Laurent Pinchart wrote: > Hi Simon, > > On Sunday 30 December 2012 09:12:02 Simon Horman wrote: > > [ CC: linux-arm-kernel, Olof Johansson, Arnd Bergmann ] > > > > On Fri, Dec 28, 2012 at 11:53:42PM +0100, Laurent Pinchart wrote: > > > Hi everybody, > > > > > > Here's the fourth version of the SH pin control and GPIO rework patches. > > > The patches have been rebased on top of v3.8-rc1 but are otherwise > > > unchanged. > > > > > > The series starts with the same additional platform-specific fixes as v3 > > > (patches 4 to 7), I would appreciate if someone could review them > > > carefully. > > > > > > You can get the series from my git tree at > > > > > > git://linuxtv.org/pinchartl/fbdev.git pinmux > > > > > > I would like to push this set to v3.9 independently of the later rework > > > and OF-related sets. Simon, can you take it in your tree ? > > > > Sure. > > > > One inconvenience of my tree is that it goes via the arm-soc tree and as > > such things need to be split out into branches. I believe in the case of > > this series the patches will need to be split across soc, board and pfc > > branches. The branches may be based on each other. > > > > Do you think the following scheme might work: > > > > Patches 1 - 7: sh-soc > > Patches 8 - 21: pfc, based on sh-soc > > Patches 22 - 29: soc (ARM SoC), based on pfc > > Patches 30 - 42: sh-soc2, based on pfc > > Patches 43 - 50: pfc2, based on a merge of soc and sh-soc2 > > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > > Patches 55 - 66: pfc3, based on soc2 > > Patches 67 - 78: sh-soc3, based on pfc3 > > Patches 79 - 81: pfc4, based on sh-soc3 > > That looks good to me. Alternatively you could base pfc3 on top of a merge of > soc and sh-soc2, and base pfc4 on top of a merge of soc2 and sh-soc3, but you > might get conflicts in Kconfig and Makefile (they should be trivial to solve > though). Thanks, I have used the modified scheme that you describe above and all seems well. In detail, I have done the following: Patches 1 - 7: sh-soc based on v3.8-rc1 Patches 8 - 21: pfc, based on sh-soc Patches 22 - 29: soc (ARM SoC), based on pfc Patches 30 - 42: sh-soc2, based on pfc Patches 43 - 50 and 55 - 66: pfc2, based on a merge of soc and sh-soc2 Patches 51 - 54: soc2 (ARM SoC), based on pfc2 Patches 67 - 78: sh-soc3, based on pfc2 Patches 79 - 81: pfc4, based on a merge of soc2 and sh-soc-3 Assuming that nothing nasty crops I plan to push the result to the renesas tree later today. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 00/81] SH pin control and GPIO rework 2013-01-07 3:03 ` Simon Horman @ 2013-01-07 19:33 ` Laurent Pinchart 2013-01-08 1:32 ` Simon Horman 0 siblings, 1 reply; 6+ messages in thread From: Laurent Pinchart @ 2013-01-07 19:33 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, On Monday 07 January 2013 12:03:10 Simon Horman wrote: > On Thu, Jan 03, 2013 at 05:40:47PM +0100, Laurent Pinchart wrote: > > On Sunday 30 December 2012 09:12:02 Simon Horman wrote: > > > [ CC: linux-arm-kernel, Olof Johansson, Arnd Bergmann ] > > > > > > On Fri, Dec 28, 2012 at 11:53:42PM +0100, Laurent Pinchart wrote: > > > > Hi everybody, > > > > > > > > Here's the fourth version of the SH pin control and GPIO rework > > > > patches. The patches have been rebased on top of v3.8-rc1 but are > > > > otherwise unchanged. > > > > > > > > The series starts with the same additional platform-specific fixes as > > > > v3 (patches 4 to 7), I would appreciate if someone could review them > > > > carefully. > > > > > > > > You can get the series from my git tree at > > > > > > > > git://linuxtv.org/pinchartl/fbdev.git pinmux > > > > > > > > I would like to push this set to v3.9 independently of the later > > > > rework and OF-related sets. Simon, can you take it in your tree ? > > > > > > Sure. > > > > > > One inconvenience of my tree is that it goes via the arm-soc tree and as > > > such things need to be split out into branches. I believe in the case of > > > this series the patches will need to be split across soc, board and pfc > > > branches. The branches may be based on each other. > > > > > > Do you think the following scheme might work: > > > > > > Patches 1 - 7: sh-soc > > > Patches 8 - 21: pfc, based on sh-soc > > > Patches 22 - 29: soc (ARM SoC), based on pfc > > > Patches 30 - 42: sh-soc2, based on pfc > > > Patches 43 - 50: pfc2, based on a merge of soc and sh-soc2 > > > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > > > Patches 55 - 66: pfc3, based on soc2 > > > Patches 67 - 78: sh-soc3, based on pfc3 > > > Patches 79 - 81: pfc4, based on sh-soc3 > > > > That looks good to me. Alternatively you could base pfc3 on top of a merge > > of soc and sh-soc2, and base pfc4 on top of a merge of soc2 and sh-soc3, > > but you might get conflicts in Kconfig and Makefile (they should be > > trivial to solve though). > > Thanks, I have used the modified scheme that you describe above and all > seems well. In detail, I have done the following: > > Patches 1 - 7: sh-soc based on v3.8-rc1 > Patches 8 - 21: pfc, based on sh-soc > Patches 22 - 29: soc (ARM SoC), based on pfc > Patches 30 - 42: sh-soc2, based on pfc > Patches 43 - 50 and 55 - 66: pfc2, based on a merge of soc and sh-soc2 > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > Patches 67 - 78: sh-soc3, based on pfc2 > Patches 79 - 81: pfc4, based on a merge of soc2 and sh-soc-3 > > Assuming that nothing nasty crops I plan to push the result to > the renesas tree later today. Thank you. Linus acked the next patch series but there are still two issues I need to solve. I'll repost the patches and send a pull request in the near future. -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 00/81] SH pin control and GPIO rework 2013-01-07 19:33 ` Laurent Pinchart @ 2013-01-08 1:32 ` Simon Horman 0 siblings, 0 replies; 6+ messages in thread From: Simon Horman @ 2013-01-08 1:32 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jan 07, 2013 at 08:33:55PM +0100, Laurent Pinchart wrote: > Hi Simon, > > On Monday 07 January 2013 12:03:10 Simon Horman wrote: > > On Thu, Jan 03, 2013 at 05:40:47PM +0100, Laurent Pinchart wrote: > > > On Sunday 30 December 2012 09:12:02 Simon Horman wrote: > > > > [ CC: linux-arm-kernel, Olof Johansson, Arnd Bergmann ] > > > > > > > > On Fri, Dec 28, 2012 at 11:53:42PM +0100, Laurent Pinchart wrote: > > > > > Hi everybody, > > > > > > > > > > Here's the fourth version of the SH pin control and GPIO rework > > > > > patches. The patches have been rebased on top of v3.8-rc1 but are > > > > > otherwise unchanged. > > > > > > > > > > The series starts with the same additional platform-specific fixes as > > > > > v3 (patches 4 to 7), I would appreciate if someone could review them > > > > > carefully. > > > > > > > > > > You can get the series from my git tree at > > > > > > > > > > git://linuxtv.org/pinchartl/fbdev.git pinmux > > > > > > > > > > I would like to push this set to v3.9 independently of the later > > > > > rework and OF-related sets. Simon, can you take it in your tree ? > > > > > > > > Sure. > > > > > > > > One inconvenience of my tree is that it goes via the arm-soc tree and as > > > > such things need to be split out into branches. I believe in the case of > > > > this series the patches will need to be split across soc, board and pfc > > > > branches. The branches may be based on each other. > > > > > > > > Do you think the following scheme might work: > > > > > > > > Patches 1 - 7: sh-soc > > > > Patches 8 - 21: pfc, based on sh-soc > > > > Patches 22 - 29: soc (ARM SoC), based on pfc > > > > Patches 30 - 42: sh-soc2, based on pfc > > > > Patches 43 - 50: pfc2, based on a merge of soc and sh-soc2 > > > > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > > > > Patches 55 - 66: pfc3, based on soc2 > > > > Patches 67 - 78: sh-soc3, based on pfc3 > > > > Patches 79 - 81: pfc4, based on sh-soc3 > > > > > > That looks good to me. Alternatively you could base pfc3 on top of a merge > > > of soc and sh-soc2, and base pfc4 on top of a merge of soc2 and sh-soc3, > > > but you might get conflicts in Kconfig and Makefile (they should be > > > trivial to solve though). > > > > Thanks, I have used the modified scheme that you describe above and all > > seems well. In detail, I have done the following: > > > > Patches 1 - 7: sh-soc based on v3.8-rc1 > > Patches 8 - 21: pfc, based on sh-soc > > Patches 22 - 29: soc (ARM SoC), based on pfc > > Patches 30 - 42: sh-soc2, based on pfc > > Patches 43 - 50 and 55 - 66: pfc2, based on a merge of soc and sh-soc2 > > Patches 51 - 54: soc2 (ARM SoC), based on pfc2 > > Patches 67 - 78: sh-soc3, based on pfc2 > > Patches 79 - 81: pfc4, based on a merge of soc2 and sh-soc-3 > > > > Assuming that nothing nasty crops I plan to push the result to > > the renesas tree later today. > > Thank you. > > Linus acked the next patch series but there are still two issues I need to > solve. I'll repost the patches and send a pull request in the near future. Thanks. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-01-08 1:32 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-12-28 22:53 [PATCH v4 00/81] SH pin control and GPIO rework Laurent Pinchart 2012-12-30 0:12 ` Simon Horman 2013-01-03 16:40 ` Laurent Pinchart 2013-01-07 3:03 ` Simon Horman 2013-01-07 19:33 ` Laurent Pinchart 2013-01-08 1:32 ` Simon Horman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).