From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Wed, 06 Mar 2013 07:55:45 +0000 Subject: Re: [PATCH] irqchip: intc-irqpin: Initial DT support Message-Id: <20130306075544.GD29060@verge.net.au> List-Id: References: <20130306061608.5231.23213.sendpatchset@w520> In-Reply-To: <20130306061608.5231.23213.sendpatchset@w520> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Magnus Damm Cc: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org, benh@kernel.crashing.org, grant.likely@secretlab.ca, tglx@linutronix.de On Wed, Mar 06, 2013 at 03:16:08PM +0900, Magnus Damm wrote: > From: Magnus Damm > > Add initial DT support to the INTC External IRQ Pin > driver. At this point only hardware with 4-bit wide > sense registers is supported via DT. I have added this to topic/intc-external-irq with the related patches. The holding-pen for INTC. > Signed-off-by: Magnus Damm > --- > > drivers/irqchip/irq-renesas-intc-irqpin.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > --- 0001/drivers/irqchip/irq-renesas-intc-irqpin.c > +++ work/drivers/irqchip/irq-renesas-intc-irqpin.c 2013-03-06 14:59:58.000000000 +0900 > @@ -278,6 +278,7 @@ static int intc_irqpin_irq_domain_map(st > > static struct irq_domain_ops intc_irqpin_irq_domain_ops = { > .map = intc_irqpin_irq_domain_map, > + .xlate = irq_domain_xlate_twocell, > }; > > static int intc_irqpin_probe(struct platform_device *pdev) > @@ -437,11 +438,19 @@ static int intc_irqpin_remove(struct pla > return 0; > } > > +static const struct of_device_id intc_irqpin_dt_ids[] = { > + { .compatible = "renesas,intc-irqpin", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids); > + > static struct platform_driver intc_irqpin_device_driver = { > .probe = intc_irqpin_probe, > .remove = intc_irqpin_remove, > .driver = { > .name = "renesas_intc_irqpin", > + .of_match_table = intc_irqpin_dt_ids, > + .owner = THIS_MODULE, > } > }; > >