From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v4 00/88] PFC pinctrl functions for sh7372, sh73a0, r8a7740 and r8a7779
Date: Thu, 14 Mar 2013 09:20:00 +0000 [thread overview]
Message-ID: <20130314091959.GK11196@verge.net.au> (raw)
In-Reply-To: <1363215633-4264-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
On Wed, Mar 13, 2013 at 11:59:05PM +0100, Laurent Pinchart wrote:
> Hello,
>
> The fourth version of the functions patch set defines pinctrl groups and
> functions for even more devices on sh7372, sh73a0, r8a7740 and r8a7779.
>
> Patches 01/88 to 21/88 define the groups and functions, patches 22/88 to 49/88
> replace function GPIOs by proper pinctrl mappings in board files, patches 50/88
> to 68/88 remove the corresponding function GPIOs from the PFC driver and
> patches 69/88 to 88/88 remove them from platform headers.
>
> The major difference compared to v3, beside adding more groups and functions,
> is the bias pinconf support implementation for sh73a0 (02/88). I would
> appreciate if that patch could be carefully reviewed.
>
> The patches are based on top of "[PATCH 00/25] sh-pfc: pinconf implementation"
> and are available from my git tree at
>
> git://linuxtv.org/pinchartl/fbdev.git pinmux/3.9/functions
>
> With this patch set the AG5 EVM, Kota2 and Marzen boards are fully ported from
> function GPIOs to the pinctrl API, and only one last function GPIO need to be
> removed for the KZM9G board. The next step will be to follow the same path for
> all other boards. Volunteers are welcome.
>
> I consider this set as v3.10 material. As with the previous PFC patch sets
> there are dependencies between board code changes and sh-pfc changes, so it
> would be easier to merge everything through the ARM tree.
>
> Simon, could you please replace the PFC patches in your tree with my pinmux/3.9
> pinctrl, pinconf and functions branches ? I'm sorry for the inconvienence
> caused by the rebase. I plan to now build incrementally on top of the functions
Sure, I will rebase and push the result to the renesas tree on kernel.org.
I will also include this and the other branches I announced yesterday in
a new next branch which will appear in linux-next in the not to distant
future. From there it should be possible to request branches to be pulled
into arm-soc and thus enqueued one step closer to v3.10.
> branch.
>
> Guennadi Liakhovetski (3):
> sh-pfc: sh7372: Add SDHCI and MMCIF pin groups and functions
> sh-pfc: sh73a0: Add SDHI and MMCIF pin groups and functions
> sh-pfc: r8a7740: Add SDHI and MMCIF pin groups and functions
>
> Laurent Pinchart (85):
> sh-pfc: sh73a0: Add bias (pull-up/down) pinconf support
> sh-pfc: sh73a0: Add LCD and LCD2 pin groups and functions
> sh-pfc: sh73a0: Add SCIFA and SCIFB pin groups and functions
> sh-pfc: sh73a0: Add I2C2 and I2C3 pin groups and functions
> sh-pfc: sh73a0: Add FSI pin groups and functions
> sh-pfc: sh73a0: Add KEYSC pin groups and functions
> sh-pfc: sh73a0: Add BSC pin groups and functions
> sh-pfc: sh73a0: Add USB pin groups and functions
> sh-pfc: sh73a0: Add IrDA pin groups and functions
> sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions
> sh-pfc: r8a7779: Add DU pin groups and functions
> sh-pfc: r8a7779: Add SDHI and MMCIF pin groups and functions
> sh-pfc: r8a7779: Add SCIF pin groups and functions
> sh-pfc: r8a7779: Add HSPI pin groups and functions
> sh-pfc: r8a7779: Add USB0 and USB1 PENC pinmux support
> sh-pfc: r8a7779: Add USB pin groups and functions
> sh-pfc: r8a7779: Add LBSC pin groups and functions
> sh-pfc: r8a7779: Add INTC pin groups and functions
> ARM: shmobile: ag5evm: Register pinctrl mappings for SCIF
> ARM: shmobile: ag5evm: Register pinctrl mappings for I2C
> ARM: shmobile: ag5evm: Register pinctrl mappings for FSI
> ARM: shmobile: ag5evm: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: ag5evm: Register pinctrl mappings for KEYSC
> ARM: shmobile: ag5evm: Register pinctrl mappings for IrDA
> ARM: shmobile: ap4evb: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: armadillo800eva: Register pinctrl mappings for LCDC0
> ARM: shmobile: armadillo800eva: Register pinctrl mappings for SDHI and
> MMCIF
> ARM: shmobile: bonito: Register pinctrl mappings for LCDC0
> ARM: shmobile: kota2: Register pinctrl mappings for SCIF
> ARM: shmobile: kota2: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: kota2: Register pinctrl mappings for KEYSC
> ARM: shmobile: kota2: Register pinctrl mappings for BSC
> ARM: shmobile: kzm9g: Register pinctrl mappings for LCD
> ARM: shmobile: kzm9g: Register pinctrl mappings for SCIF
> ARM: shmobile: kzm9g: Register pinctrl mappings for I2C
> ARM: shmobile: kzm9g: Register pinctrl mappings for FSI
> ARM: shmobile: kzm9g: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: kzm9g: Register pinctrl mappings for BSC
> ARM: shmobile: kzm9g: Register pinctrl mappings for USB
> ARM: shmobile: mackerel: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: marzen: Register pinctrl mappings for SDHI and MMCIF
> ARM: shmobile: marzen: Register pinctrl mappings for SCIF
> ARM: shmobile: marzen: Register pinctrl mappings for HSPI
> ARM: shmobile: marzen: Register pinctrl mappings for USB
> ARM: shmobile: marzen: Register pinctrl mappings for LBSC
> ARM: shmobile: marzen: Register pinctrl mappings for INTC
> sh-pfc: sh7372: Remove SDHI and MMCIF function GPIOS
> sh-pfc: sh73a0: Remove LCD and LCD2 function GPIOS
> sh-pfc: sh73a0: Remove SCIFA and SCIFB function GPIOS
> sh-pfc: sh73a0: Remove I2C function GPIOS
> sh-pfc: sh73a0: Remove FSI function GPIOS
> sh-pfc: sh73a0: Remove pull-up function GPIOS
> sh-pfc: sh73a0: Remove KEYSC function GPIOS
> sh-pfc: sh73a0: Remove BSC function GPIOS
> sh-pfc: sh73a0: Remove USB function GPIOS
> sh-pfc: sh73a0: Remove IrDA function GPIOS
> sh-pfc: r8a7740: Remove LCD0 and LCD1 function GPIOS
> sh-pfc: r8a7740: Remove SDHI and MMCIF function GPIOS
> sh-pfc: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
> sh-pfc: r8a7779: Remove SDHI and MMCIF function GPIOS
> sh-pfc: r8a7779: Remove SCIF function GPIOS
> sh-pfc: r8a7779: Remove HSPI function GPIOS
> sh-pfc: r8a7779: Remove USB function GPIOS
> sh-pfc: r8a7779: Remove LBSC function GPIOS
> sh-pfc: r8a7779: Remove INTC function GPIOS
> ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
> ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
> ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
> ARM: shmobile: sh73a0: Remove I2C function GPIOs
> ARM: shmobile: sh73a0: Remove FSI function GPIOs
> ARM: shmobile: sh73a0: Remove pull-up function GPIOS
> ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
> ARM: shmobile: sh73a0: Remove BSC function GPIOs
> ARM: shmobile: sh73a0: Remove USB function GPIOs
> ARM: shmobile: sh73a0: Remove IrDA function GPIOs
> ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
> ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
> ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
> ARM: shmobile: r8a7779: Remove DU function GPIOs
> ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
> ARM: shmobile: r8a7779: Remove SCIF function GPIOs
> ARM: shmobile: r8a7779: Remove HSPI function GPIOs
> ARM: shmobile: r8a7779: Remove USB function GPIOs
> ARM: shmobile: r8a7779: Remove LBSC function GPIOs
> ARM: shmobile: r8a7779: Remove INTC function GPIOs
>
> arch/arm/mach-shmobile/board-ag5evm.c | 146 +-
> arch/arm/mach-shmobile/board-ap4evb.c | 55 +-
> arch/arm/mach-shmobile/board-armadillo800eva.c | 100 +-
> arch/arm/mach-shmobile/board-bonito.c | 44 +-
> arch/arm/mach-shmobile/board-kota2.c | 166 +-
> arch/arm/mach-shmobile/board-kzm9g.c | 138 +-
> arch/arm/mach-shmobile/board-mackerel.c | 68 +-
> arch/arm/mach-shmobile/board-marzen.c | 75 +-
> arch/arm/mach-shmobile/include/mach/r8a7740.h | 74 -
> arch/arm/mach-shmobile/include/mach/r8a7779.h | 324 ++-
> arch/arm/mach-shmobile/include/mach/sh7372.h | 29 -
> arch/arm/mach-shmobile/include/mach/sh73a0.h | 363 ++--
> drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 596 +++++-
> drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 1589 +++++++++++++--
> drivers/pinctrl/sh-pfc/pfc-sh7372.c | 231 ++-
> drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 2545 +++++++++++++++++-------
> 16 files changed, 4646 insertions(+), 1897 deletions(-)
>
> --
> Regards,
>
> Laurent Pinchart
>
next prev parent reply other threads:[~2013-03-14 9:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 22:59 [PATCH v4 00/88] PFC pinctrl functions for sh7372, sh73a0, r8a7740 and r8a7779 Laurent Pinchart
2013-03-14 9:20 ` Simon Horman [this message]
2013-03-14 9:46 ` Simon Horman
2013-03-14 12:54 ` Laurent Pinchart
2013-03-14 13:31 ` Linus Walleij
2013-03-14 13:39 ` Laurent Pinchart
2013-03-14 13:55 ` Linus Walleij
2013-03-14 14:01 ` Laurent Pinchart
2013-03-14 15:09 ` Linus Walleij
2013-03-14 15:13 ` Laurent Pinchart
2013-03-15 6:25 ` Simon Horman
2013-03-15 12:35 ` Laurent Pinchart
2013-03-15 15:37 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130314091959.GK11196@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox