From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 07/13] sh-pfc: r8a73a4: Remove SCIF function GPIOS
Date: Tue, 26 Mar 2013 13:50:55 +0000 [thread overview]
Message-ID: <20130326135055.31366.18923.sendpatchset@w520> (raw)
From: Magnus Damm <damm@opensource.se>
The r8a73a4 board support will use the pinctrl API to control
the SCIF pins, remove the corresponding unused function GPIOS.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 45 ----------------------------------
1 file changed, 45 deletions(-)
--- 0012/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c 2013-03-26 18:29:57.000000000 +0900
@@ -1822,55 +1822,45 @@ static const struct pinmux_func pinmux_f
/* Port19 */
GPIO_FN(LCDD19),
- GPIO_FN(SCIFB3_RTS_19),
GPIO_FN(DU0_DB3),
/* Port20 */
GPIO_FN(LCDD20),
- GPIO_FN(SCIFB3_CTS_20),
GPIO_FN(DU0_DB4),
/* Port21 */
GPIO_FN(LCDD21),
- GPIO_FN(SCIFB3_TXD_21),
GPIO_FN(DU0_DB5),
/* Port22 */
GPIO_FN(LCDD22),
- GPIO_FN(SCIFB3_RXD_22),
GPIO_FN(DU0_DB6),
/* Port23 */
GPIO_FN(LCDD23),
- GPIO_FN(SCIFB3_SCK_23),
GPIO_FN(DU0_DB7),
/* Port24 */
GPIO_FN(LCDHSYN),
GPIO_FN(LCDCS),
- GPIO_FN(SCIFB1_RTS_24),
GPIO_FN(DU0_EXHSYNC_N_CSYNC_N_HSYNC_N),
/* Port25 */
GPIO_FN(LCDVSYN),
- GPIO_FN(SCIFB1_CTS_25),
GPIO_FN(DU0_EXVSYNC_N_VSYNC_N_CSYNC_N),
/* Port26 */
GPIO_FN(LCDDCK),
GPIO_FN(LCDWR),
- GPIO_FN(SCIFB1_TXD_26),
GPIO_FN(DU0_DOTCLKIN),
/* Port27 */
GPIO_FN(LCDDISP),
GPIO_FN(LCDRS),
- GPIO_FN(SCIFB1_RXD_27),
GPIO_FN(DU0_DOTCLKOUT),
/* Port28 */
GPIO_FN(LCDRD_N),
- GPIO_FN(SCIFB1_SCK_28),
GPIO_FN(DU0_DOTCLKOUTB),
/* Port29 */
@@ -1884,48 +1874,36 @@ static const struct pinmux_func pinmux_f
GPIO_FN(DU0_ODDF_N_CLAMP),
/* Port32 */
- GPIO_FN(SCIFA0_RTS),
GPIO_FN(SIM0_DET),
GPIO_FN(CSCIF0_RTS),
/* Port33 */
- GPIO_FN(SCIFA0_CTS),
GPIO_FN(SIM1_DET),
GPIO_FN(CSCIF0_CTS),
/* Port34 */
- GPIO_FN(SCIFA0_SCK),
GPIO_FN(SIM0_PWRON),
GPIO_FN(CSCIF0_SCK),
/* Port35 */
- GPIO_FN(SCIFA1_RTS),
GPIO_FN(CSCIF1_RTS),
/* Port36 */
- GPIO_FN(SCIFA1_CTS),
GPIO_FN(CSCIF1_CTS),
/* Port37 */
- GPIO_FN(SCIFA1_SCK),
GPIO_FN(CSCIF1_SCK),
/* Port38 */
- GPIO_FN(SCIFB0_RTS),
GPIO_FN(TPU0TO1),
- GPIO_FN(SCIFB3_RTS_38),
GPIO_FN(CHSCIF0_HRTS),
/* Port39 */
- GPIO_FN(SCIFB0_CTS),
GPIO_FN(TPU0TO2),
- GPIO_FN(SCIFB3_CTS_39),
GPIO_FN(CHSCIF0_HCTS),
/* Port40 */
- GPIO_FN(SCIFB0_SCK),
GPIO_FN(TPU0TO3),
- GPIO_FN(SCIFB3_SCK_40),
GPIO_FN(CHSCIF0_HSCK),
/* Port64 */
@@ -1936,52 +1914,44 @@ static const struct pinmux_func pinmux_f
/* Port66 */
GPIO_FN(HSI_RX_WAKE),
- GPIO_FN(SCIFB2_CTS_66),
GPIO_FN(MSIOF3_SYNC),
GPIO_FN(GenIO4),
GPIO_FN(IRQ40),
/* Port67 */
GPIO_FN(HSI_RX_READY),
- GPIO_FN(SCIFB1_TXD_67),
GPIO_FN(GIO_OUT3_67),
GPIO_FN(CHSCIF1_HTX),
/* Port68 */
GPIO_FN(HSI_RX_FLAG),
- GPIO_FN(SCIFB2_TXD_68),
GPIO_FN(MSIOF3_TXD),
GPIO_FN(GIO_OUT4_68),
/* Port69 */
GPIO_FN(HSI_RX_DATA),
- GPIO_FN(SCIFB2_RXD_69),
GPIO_FN(MSIOF3_RXD),
GPIO_FN(GIO_OUT5_69),
/* Port70 */
GPIO_FN(HSI_TX_FLAG),
- GPIO_FN(SCIFB1_RTS_70),
GPIO_FN(GIO_OUT1_70),
GPIO_FN(HSIC_TSTCLK0),
GPIO_FN(CHSCIF1_HRTS),
/* Port71 */
GPIO_FN(HSI_TX_DATA),
- GPIO_FN(SCIFB1_CTS_71),
GPIO_FN(GIO_OUT2_71),
GPIO_FN(HSIC_TSTCLK1),
GPIO_FN(CHSCIF1_HCTS),
/* Port72 */
GPIO_FN(HSI_TX_WAKE),
- GPIO_FN(SCIFB1_RXD_72),
GPIO_FN(GenIO8),
GPIO_FN(CHSCIF1_HRX),
/* Port73 */
GPIO_FN(HSI_TX_READY),
- GPIO_FN(SCIFB2_RTS_73),
GPIO_FN(MSIOF3_SCK),
GPIO_FN(GIO_OUT0_73),
@@ -2060,36 +2030,28 @@ static const struct pinmux_func pinmux_f
GPIO_FN(IRQ49),
/* Port116 */
- GPIO_FN(SCIFA0_TXD),
GPIO_FN(CSCIF0_TX),
/* Port117 */
- GPIO_FN(SCIFA0_RXD),
GPIO_FN(CSCIF0_RX),
/* Port118 */
- GPIO_FN(SCIFA1_TXD),
GPIO_FN(CSCIF1_TX),
/* Port119 */
- GPIO_FN(SCIFA1_RXD),
GPIO_FN(CSCIF1_RX),
/* Port120 */
GPIO_FN(SF_PORT_1_120),
- GPIO_FN(SCIFB3_RXD_120),
GPIO_FN(DU0_CDE),
/* Port121 */
GPIO_FN(SF_PORT_0_121),
- GPIO_FN(SCIFB3_TXD_121),
/* Port122 */
- GPIO_FN(SCIFB0_TXD),
GPIO_FN(CHSCIF0_HTX),
/* Port123 */
- GPIO_FN(SCIFB0_RXD),
GPIO_FN(CHSCIF0_HRX),
/* Port124 */
@@ -2383,11 +2345,9 @@ static const struct pinmux_func pinmux_f
GPIO_FN(MSIOF0_TXD),
/* Port261 */
- GPIO_FN(SCIFB1_SCK_261),
GPIO_FN(CHSCIF1_HSCK),
/* Port262 */
- GPIO_FN(SCIFB2_SCK_262),
/* Port263 - Port266 FN1 */
GPIO_FN(MSIOF1_SS2),
@@ -2471,7 +2431,6 @@ static const struct pinmux_func pinmux_f
/* Port295 */
GPIO_FN(SDHID2_0),
GPIO_FN(MSIOF4_TXD),
- GPIO_FN(SCIFB2_TXD_295),
GPIO_FN(MSIOF6_TXD),
/* Port296 */
@@ -2492,10 +2451,6 @@ static const struct pinmux_func pinmux_f
GPIO_FN(MSIOF4_SS1),
/* Port297 - Port300 FN3 */
- GPIO_FN(SCIFB2_RXD_297),
- GPIO_FN(SCIFB2_CTS_298),
- GPIO_FN(SCIFB2_SCK_299),
- GPIO_FN(SCIFB2_RTS_300),
/* Port297 - Port300 FN4 */
GPIO_FN(MSIOF6_RXD),
next reply other threads:[~2013-03-26 13:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 13:50 Magnus Damm [this message]
2013-03-26 16:04 ` [PATCH 07/13] sh-pfc: r8a73a4: Remove SCIF function GPIOS Laurent Pinchart
2013-03-27 14:55 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130326135055.31366.18923.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox