From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Wed, 27 Mar 2013 04:56:28 +0000 Subject: Re: [PATCH 00/13 v2] sh-pfc: Initial r8a73a4 PFC support Message-Id: <20130327045627.GG25431@verge.net.au> List-Id: References: <20130326134939.31366.42030.sendpatchset@w520> In-Reply-To: <20130326134939.31366.42030.sendpatchset@w520> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Tue, Mar 26, 2013 at 10:49:39PM +0900, Magnus Damm wrote: > sh-pfc: Initial r8a73a4 PFC support (V2) > > [PATCH 01/13] sh-pfc: Add r8a73a4 pinmux support > [PATCH 02/13] sh-pfc: r8a73a4: Support sparse GPIO numbers > [PATCH 03/13 v2] sh-pfc: r8a73a4: GPIO IRQ support > [PATCH 04/13] sh-pfc: r8a73a4: Add bias (pull-up/down) pinconf support > [PATCH 05/13] sh-pfc: r8a73a4: Add SCIF pin groups and functions > [PATCH 06/13] sh-pfc: r8a73a4: Add IRQC pin groups and functions > [PATCH 07/13] sh-pfc: r8a73a4: Remove SCIF function GPIOS > [PATCH 08/13] sh-pfc: r8a73a4: Remove IRQC function GPIOS > [PATCH 09/13] ARM: shmobile: r8a73a4: Remove SCIF function GPIOs > [PATCH 10/13] ARM: shmobile: r8a73a4: Remove IRQC function GPIOs > [PATCH 11/13] sh-pfc: r8a73a4: Remove function GPIOs > [PATCH 12/13] ARM: shmobile: r8a73a4: Remove all GPIO enums > [PATCH 13/13] sh-pfc: r8a73a4: Remove unused GPIO bias data > > This series is V2 of initial PFC support for the r8a73a4 SoC. > The patches add a regular old-style GPIO function controller > and makes it partially converted over to PINCTRL for SCIF > and IRQC that are tied up on the APE6EVM board. The final > patches remove the GPIO function support, so when new drivers > for r8a73a4 are added then PINCTRL support has to be included. Hi Magnus, I apologise if the information is obvious or available elsewhere, but could you let me know a bit about the dependencies for this series. I am assuming it depends on: [PATCH 00/03 v3] ARM: shmobile: r8a73a4 APE6EVM board support [PATCH/RFC 00/12] Split PFC and GPIO for R8A7779 Laurent, if/when this series is ready do you want to take it or should I add it to my tree directly?