linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] ARM: shmobile: r8a7778: add HPB-DMAC support
Date: Fri, 26 Jul 2013 00:10:53 +0000	[thread overview]
Message-ID: <20130726001052.GA28912@verge.net.au> (raw)
In-Reply-To: <201307230222.04763.sergei.shtylyov@cogentembedded.com>

[ Cc Morimoto-san ]

On Tue, Jul 23, 2013 at 02:22:04AM +0400, Sergei Shtylyov wrote:
> From: Max Filippov <max.filippov@cogentembedded.com>
> 
> Add HPB-DMAC platform device on R8A7778 SoC along with its slave and channel
> configurations.
> 
> Signed-off-by: Max Filippov <max.filippov@cogentembedded.com>
> [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed <mach/dma.h>
> to <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c, removed
> SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and
> hpb_dmae_channels[].]
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> Changes in version 2:
> - moved *enum* declaring HPB-DMAC slave IDs from the separate header file to
>   <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c;
> - removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[]
>   and hpb_dmae_channels[].
> 
>  arch/arm/mach-shmobile/include/mach/r8a7778.h |    8 ++
>  arch/arm/mach-shmobile/setup-r8a7778.c        |   80 ++++++++++++++++++++++++++
>  2 files changed, 88 insertions(+)

Morimoto-san, Magnus,

could you please review this?

> 
> Index: renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h
> =================================> --- renesas.orig/arch/arm/mach-shmobile/include/mach/r8a7778.h
> +++ renesas/arch/arm/mach-shmobile/include/mach/r8a7778.h
> @@ -1,6 +1,7 @@
>  /*
>   * Copyright (C) 2013  Renesas Solutions Corp.
>   * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> + * Copyright (C) 2013  Cogent Embedded, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License as published by
> @@ -23,6 +24,13 @@
>  #include <linux/sh_eth.h>
>  #include <linux/platform_data/usb-rcar-phy.h>
>  
> +/* HPB-DMA slave IDs */
> +enum {
> +	HPBDMA_SLAVE_DUMMY,
> +	HPBDMA_SLAVE_SDHI0_TX,
> +	HPBDMA_SLAVE_SDHI0_RX,
> +};
> +
>  extern void r8a7778_add_standard_devices(void);
>  extern void r8a7778_add_standard_devices_dt(void);
>  extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
> Index: renesas/arch/arm/mach-shmobile/setup-r8a7778.c
> =================================> --- renesas.orig/arch/arm/mach-shmobile/setup-r8a7778.c
> +++ renesas/arch/arm/mach-shmobile/setup-r8a7778.c
> @@ -24,6 +24,7 @@
>  #include <linux/irqchip/arm-gic.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
> +#include <linux/platform_data/dma-rcar-hpbdma.h>
>  #include <linux/platform_data/gpio-rcar.h>
>  #include <linux/platform_data/irq-renesas-intc-irqpin.h>
>  #include <linux/platform_device.h>
> @@ -333,6 +334,84 @@ void __init r8a7778_add_mmc_device(struc
>  		info, sizeof(*info));
>  }
>  
> +/* HPB-DMA */
> +
> +/* Asynchronous mode register (ASYNCMDR) bits */
> +#define	ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
> +#define	ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
> +
> +static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
> +	{
> +		.id	= HPBDMA_SLAVE_SDHI0_TX,
> +		.addr	= 0xffe4c000 + 0x30,
> +		.dcr	= DCR_SPDS_16BIT | DCR_DMDL | DCR_DPDS_16BIT,
> +		.rstr	= ASYNCRSTR_ASRST21 | ASYNCRSTR_ASRST22 |
> +			  ASYNCRSTR_ASRST23,
> +		.mdr	= ASYNCMDR_ASMD21_SINGLE,
> +		.mdm	= ASYNCMDR_ASMD21_MASK,
> +		.port	= 0x0D0C,
> +		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
> +		.dma_ch	= 21,
> +	}, {
> +		.id	= HPBDMA_SLAVE_SDHI0_RX,
> +		.addr	= 0xffe4c000 + 0x30,
> +		.dcr	= DCR_SMDL | DCR_SPDS_16BIT | DCR_DPDS_16BIT,
> +		.rstr	= ASYNCRSTR_ASRST21 | ASYNCRSTR_ASRST22 |
> +			  ASYNCRSTR_ASRST23,
> +		.mdr	= ASYNCMDR_ASMD22_SINGLE,
> +		.mdm	= ASYNCMDR_ASMD22_MASK,
> +		.port	= 0x0D0C,
> +		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
> +		.dma_ch	= 22,
> +	},
> +};
> +
> +static const struct hpb_dmae_channel hpb_dmae_channels[] = {
> +	/* ch. 21 SD0 */
> +	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX),
> +	/* ch. 22 SD0 */
> +	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX),
> +};
> +
> +static struct hpb_dmae_pdata dma_platform_data __initdata = {
> +	.slaves			= hpb_dmae_slaves,
> +	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
> +	.channels		= hpb_dmae_channels,
> +	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
> +	.ts_shift		= {
> +		[XMIT_SZ_8BIT]	= 0,
> +		[XMIT_SZ_16BIT]	= 1,
> +		[XMIT_SZ_32BIT]	= 2,
> +	},
> +	.num_hw_channels	= 39,
> +};
> +
> +static struct resource hpb_dmae_resources[] __initdata = {
> +	/* Channel registers */
> +	DEFINE_RES_MEM(0xffc08000, 0x1000),
> +	/* Common registers */
> +	DEFINE_RES_MEM(0xffc09000, 0x170),
> +	/* Asynchronous reset registers */
> +	DEFINE_RES_MEM(0xffc00300, 4),
> +	/* Asynchronous mode registers */
> +	DEFINE_RES_MEM(0xffc00400, 4),
> +	/* IRQ for DMA channels */
> +	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
> +};
> +
> +static void __init r8a7778_register_hpb_dmae(void)
> +{
> +	platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
> +					  hpb_dmae_resources,
> +					  ARRAY_SIZE(hpb_dmae_resources),
> +					  &dma_platform_data,
> +					  sizeof(dma_platform_data));
> +}
> +
>  void __init r8a7778_add_standard_devices(void)
>  {
>  	int i;
> @@ -355,6 +434,7 @@ void __init r8a7778_add_standard_devices
>  
>  	r8a7778_register_tmu(0);
>  	r8a7778_register_tmu(1);
> +	r8a7778_register_hpb_dmae();
>  }
>  
>  void __init r8a7778_init_late(void)
> 

  reply	other threads:[~2013-07-26  0:10 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-22 22:18 [PATCH v2 0/2] R8A7778/BOCK-W: HPB-DMAC support for SDHI0 Sergei Shtylyov
2013-07-22 22:22 ` [PATCH v2 1/2] ARM: shmobile: r8a7778: add HPB-DMAC support Sergei Shtylyov
2013-07-26  0:10   ` Simon Horman [this message]
2013-07-26  1:39     ` Kuninori Morimoto
2013-07-29 22:46       ` Sergei Shtylyov
2013-07-30  0:30         ` Kuninori Morimoto
2013-07-22 22:23 ` [PATCH v2 2/2] ARM: shmobile: BOCK-W: enable DMA for SDHI0 Sergei Shtylyov
2013-07-23  1:11   ` Simon Horman
2013-07-23  1:58     ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130726001052.GA28912@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).