From mboxrd@z Thu Jan  1 00:00:00 1970
From: Simon Horman <horms@verge.net.au>
Date: Thu, 05 Sep 2013 07:19:50 +0000
Subject: Re: [PATCH 4/5 v2] ARM: shmobile: bockw: add R-Car sound support (PIO)
Message-Id: <20130905071946.GA8334@verge.net.au>
List-Id: <linux-sh.vger.kernel.org>
References: <874nb2jgc4.wl%kuninori.morimoto.gx@renesas.com>
 <87haecvns0.wl%kuninori.morimoto.gx@renesas.com>
 <87bo4kvnow.wl%kuninori.morimoto.gx@renesas.com>
 <20130905055749.GF14960@verge.net.au>
In-Reply-To: <20130905055749.GF14960@verge.net.au>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Laurent <laurent.pinchart@ideasonboard.com>, Magnus <magnus.damm@gmail.com>, Linux-SH <linux-sh@vger.kernel.org>, Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>, "broonie@kernel.org" <broonie@kernel.org>, Linux-ALSA <alsa-devel@alsa-project.org>

[ CC Mark Brown, alsa-devel ]

On Thu, Sep 05, 2013 at 02:57:51PM +0900, Simon Horman wrote:
> On Mon, Aug 26, 2013 at 01:52:35AM -0700, Kuninori Morimoto wrote:
> > This patch enables R-Car sound,
> > AK4643 (CN19) and AK4554 (CN20/CN21) codec chip
> > on Bock-W.
> > 
> > But, it supports PIO transfer only at this point.
> > User can check sound settings (Dip-switch/PFC etc)
> > via this patch, but will get under/over flow error
> > when playback/capture.
> > Because PIO transfer via SSI will be interrupted
> > "sampling rate" times per 1 second.
> > 
> > DMA transfer will be supported when HPB-DMAC was
> > enabled on r8a7778.
> > 
> > You will notice strange ALSA sound card HW
> > numbering on Bock-W board.
> > This came from AK4554 strange format on playback/capture.
> > The format on playback/capture is same on "normal" codec chip,
> > but AK4554 was different.
> > Because of that, AK4554 playback/capture are
> > registered as a different sound card.
> > 
> > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> > ---
> > v1 -> v2
> 
> Thanks, I have queued this up for v3.13.
> 
> There was a bit of diff-noise, please make sure I have applied it
> correctly. The patch I applied is below:

Unfortunately I didn't read your cover email carefully before queuing this up.
I now see that it has dependencies that aren't present in v3.11-rc and
thus I have temporarily dropped it.

It seems to me that the dependencies could be provided by
the topic/car branch of
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git.

Morimoto-san, is this correct?
If so, Mark, would it be possible for you to provide topic/car
or similar as stable branch for me to use as a base?
My intention is to queue these up for v3.13.