From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Thu, 12 Sep 2013 00:55:06 +0000 Subject: Re: [PATCH] ARM: shmobile: Break out R-Car Gen2 setup code Message-Id: <20130912005504.GH23279@verge.net.au> List-Id: References: <20130912003249.24015.41583.sendpatchset@w520> <20130912004730.GG23279@verge.net.au> In-Reply-To: <20130912004730.GG23279@verge.net.au> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org On Thu, Sep 12, 2013 at 09:47:32AM +0900, Simon Horman wrote: > On Thu, Sep 12, 2013 at 09:32:49AM +0900, Magnus Damm wrote: > > From: Magnus Damm > > > > Move arch timer workaround code and boot mode pin > > handling from setup-r8a7790.c to setup-rcar-gen2.c. > > > > With this in place the same code can be used on > > other R-Car Generation 2 devices such as r8a7791. > > This seems reasonable to me. > > Am I correct in thinking that you plan a follow-up patch to make use of > this on the r8a7771 in the not to distant future. I see my reply was too hasty and you have sent such a patch. Sorry for the noise! > > Signed-off-by: Magnus Damm > > --- > > > > Written against renesas-devel-20130906 > > > > arch/arm/mach-shmobile/Makefile | 2 > > arch/arm/mach-shmobile/board-lager-reference.c | 2 > > arch/arm/mach-shmobile/board-lager.c | 2 > > arch/arm/mach-shmobile/clock-r8a7790.c | 2 > > arch/arm/mach-shmobile/include/mach/r8a7790.h | 6 - > > arch/arm/mach-shmobile/include/mach/rcar-gen2.h | 8 ++ > > arch/arm/mach-shmobile/setup-r8a7790.c | 68 ----------------- > > arch/arm/mach-shmobile/setup-rcar-gen2.c | 91 +++++++++++++++++++++++ > > 8 files changed, 106 insertions(+), 75 deletions(-) > > > > --- 0001/arch/arm/mach-shmobile/Makefile > > +++ work/arch/arm/mach-shmobile/Makefile 2013-09-12 08:52:36.000000000 +0900 > > @@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a7 > > obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o > > obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o > > obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o > > -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o > > +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o > > obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o > > obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o > > > > --- 0001/arch/arm/mach-shmobile/board-lager-reference.c > > +++ work/arch/arm/mach-shmobile/board-lager-reference.c 2013-09-12 08:56:18.000000000 +0900 > > @@ -40,7 +40,7 @@ static const char *lager_boards_compat_d > > DT_MACHINE_START(LAGER_DT, "lager") > > .smp = smp_ops(r8a7790_smp_ops), > > .init_early = r8a7790_init_early, > > + .init_time = rcar_gen2_timer_init, > > .init_machine = lager_add_standard_devices, > > - .init_time = r8a7790_timer_init, > > .dt_compat = lager_boards_compat_dt, > > MACHINE_END > > --- 0001/arch/arm/mach-shmobile/board-lager.c > > +++ work/arch/arm/mach-shmobile/board-lager.c 2013-09-12 08:55:50.000000000 +0900 > > @@ -230,7 +230,7 @@ static const char * const lager_boards_c > > DT_MACHINE_START(LAGER_DT, "lager") > > .smp = smp_ops(r8a7790_smp_ops), > > .init_early = r8a7790_init_early, > > - .init_time = r8a7790_timer_init, > > + .init_time = rcar_gen2_timer_init, > > .init_machine = lager_add_standard_devices, > > .dt_compat = lager_boards_compat_dt, > > MACHINE_END > > --- 0001/arch/arm/mach-shmobile/clock-r8a7790.c > > +++ work/arch/arm/mach-shmobile/clock-r8a7790.c 2013-09-12 08:54:38.000000000 +0900 > > @@ -300,7 +300,7 @@ static struct clk_lookup lookups[] = { > > > > void __init r8a7790_clock_init(void) > > { > > - u32 mode = r8a7790_read_mode_pins(); > > + u32 mode = rcar_gen2_read_mode_pins(); > > int k, ret = 0; > > > > switch (mode & (MD(14) | MD(13))) { > > --- 0001/arch/arm/mach-shmobile/include/mach/r8a7790.h > > +++ work/arch/arm/mach-shmobile/include/mach/r8a7790.h 2013-09-12 08:57:18.000000000 +0900 > > @@ -1,15 +1,13 @@ > > #ifndef __ASM_R8A7790_H__ > > #define __ASM_R8A7790_H__ > > > > +#include > > + > > void r8a7790_add_standard_devices(void); > > void r8a7790_add_dt_devices(void); > > void r8a7790_clock_init(void); > > void r8a7790_pinmux_init(void); > > void r8a7790_init_early(void); > > -void r8a7790_timer_init(void); > > extern struct smp_operations r8a7790_smp_ops; > > > > -#define MD(nr) BIT(nr) > > -u32 r8a7790_read_mode_pins(void); > > - > > #endif /* __ASM_R8A7790_H__ */ > > --- /dev/null > > +++ work/arch/arm/mach-shmobile/include/mach/rcar-gen2.h 2013-09-12 08:51:34.000000000 +0900 > > @@ -0,0 +1,8 @@ > > +#ifndef __ASM_RCAR_GEN2_H__ > > +#define __ASM_RCAR_GEN2_H__ > > + > > +void rcar_gen2_timer_init(void); > > +#define MD(nr) BIT(nr) > > +u32 rcar_gen2_read_mode_pins(void); > > + > > +#endif /* __ASM_RCAR_GEN2_H__ */ > > --- 0001/arch/arm/mach-shmobile/setup-r8a7790.c > > +++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2013-09-12 08:56:33.000000000 +0900 > > @@ -18,7 +18,6 @@ > > * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > */ > > > > -#include > > #include > > #include > > #include > > @@ -203,71 +202,6 @@ void __init r8a7790_add_standard_devices > > r8a7790_register_thermal(); > > } > > > > -#define MODEMR 0xe6160060 > > - > > -u32 __init r8a7790_read_mode_pins(void) > > -{ > > - void __iomem *modemr = ioremap_nocache(MODEMR, 4); > > - u32 mode; > > - > > - BUG_ON(!modemr); > > - mode = ioread32(modemr); > > - iounmap(modemr); > > - > > - return mode; > > -} > > - > > -#define CNTCR 0 > > -#define CNTFID0 0x20 > > - > > -void __init r8a7790_timer_init(void) > > -{ > > -#ifdef CONFIG_ARM_ARCH_TIMER > > - u32 mode = r8a7790_read_mode_pins(); > > - void __iomem *base; > > - int extal_mhz = 0; > > - u32 freq; > > - > > - /* At Linux boot time the r8a7790 arch timer comes up > > - * with the counter disabled. Moreover, it may also report > > - * a potentially incorrect fixed 13 MHz frequency. To be > > - * correct these registers need to be updated to use the > > - * frequency EXTAL / 2 which can be determined by the MD pins. > > - */ > > - > > - switch (mode & (MD(14) | MD(13))) { > > - case 0: > > - extal_mhz = 15; > > - break; > > - case MD(13): > > - extal_mhz = 20; > > - break; > > - case MD(14): > > - extal_mhz = 26; > > - break; > > - case MD(13) | MD(14): > > - extal_mhz = 30; > > - break; > > - } > > - > > - /* The arch timer frequency equals EXTAL / 2 */ > > - freq = extal_mhz * (1000000 / 2); > > - > > - /* Remap "armgcnt address map" space */ > > - base = ioremap(0xe6080000, PAGE_SIZE); > > - > > - /* Update registers with correct frequency */ > > - iowrite32(freq, base + CNTFID0); > > - asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); > > - > > - /* make sure arch timer is started by setting bit 0 of CNTCR */ > > - iowrite32(1, base + CNTCR); > > - iounmap(base); > > -#endif /* CONFIG_ARM_ARCH_TIMER */ > > - > > - clocksource_of_init(); > > -} > > - > > void __init r8a7790_init_early(void) > > { > > #ifndef CONFIG_ARM_ARCH_TIMER > > @@ -285,7 +219,7 @@ static const char * const r8a7790_boards > > DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") > > .smp = smp_ops(r8a7790_smp_ops), > > .init_early = r8a7790_init_early, > > - .init_time = r8a7790_timer_init, > > + .init_time = rcar_gen2_timer_init, > > .dt_compat = r8a7790_boards_compat_dt, > > MACHINE_END > > #endif /* CONFIG_USE_OF */ > > --- /dev/null > > +++ work/arch/arm/mach-shmobile/setup-rcar-gen2.c 2013-09-12 08:58:30.000000000 +0900 > > @@ -0,0 +1,91 @@ > > +/* > > + * R-Car Generation 2 support > > + * > > + * Copyright (C) 2013 Renesas Solutions Corp. > > + * Copyright (C) 2013 Magnus Damm > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; version 2 of the License. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * You should have received a copy of the GNU General Public License > > + * along with this program; if not, write to the Free Software > > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define MODEMR 0xe6160060 > > + > > +u32 __init rcar_gen2_read_mode_pins(void) > > +{ > > + void __iomem *modemr = ioremap_nocache(MODEMR, 4); > > + u32 mode; > > + > > + BUG_ON(!modemr); > > + mode = ioread32(modemr); > > + iounmap(modemr); > > + > > + return mode; > > +} > > + > > +#define CNTCR 0 > > +#define CNTFID0 0x20 > > + > > +void __init rcar_gen2_timer_init(void) > > +{ > > +#ifdef CONFIG_ARM_ARCH_TIMER > > + u32 mode = rcar_gen2_read_mode_pins(); > > + void __iomem *base; > > + int extal_mhz = 0; > > + u32 freq; > > + > > + /* At Linux boot time the r8a7790 arch timer comes up > > + * with the counter disabled. Moreover, it may also report > > + * a potentially incorrect fixed 13 MHz frequency. To be > > + * correct these registers need to be updated to use the > > + * frequency EXTAL / 2 which can be determined by the MD pins. > > + */ > > + > > + switch (mode & (MD(14) | MD(13))) { > > + case 0: > > + extal_mhz = 15; > > + break; > > + case MD(13): > > + extal_mhz = 20; > > + break; > > + case MD(14): > > + extal_mhz = 26; > > + break; > > + case MD(13) | MD(14): > > + extal_mhz = 30; > > + break; > > + } > > + > > + /* The arch timer frequency equals EXTAL / 2 */ > > + freq = extal_mhz * (1000000 / 2); > > + > > + /* Remap "armgcnt address map" space */ > > + base = ioremap(0xe6080000, PAGE_SIZE); > > + > > + /* Update registers with correct frequency */ > > + iowrite32(freq, base + CNTFID0); > > + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); > > + > > + /* make sure arch timer is started by setting bit 0 of CNTCR */ > > + iowrite32(1, base + CNTCR); > > + iounmap(base); > > +#endif /* CONFIG_ARM_ARCH_TIMER */ > > + > > + clocksource_of_init(); > > +} > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >