linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/10] ARM: shmobile: r8a7791 SMP support
Date: Tue, 01 Oct 2013 08:13:16 +0000	[thread overview]
Message-ID: <20131001081316.4136.4137.sendpatchset@w520> (raw)
In-Reply-To: <20131001081143.4136.46925.sendpatchset@w520>

From: Magnus Damm <damm@opensource.se>

Tie in the APMU SMP code on r8a7791. When used together
with the secondary CPU device node and smp_ops in the
board specific code then this will allow use of the
two Cortex-A15 cores in the r8a7791 SoC.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/Makefile               |    1 
 arch/arm/mach-shmobile/include/mach/r8a7791.h |    1 
 arch/arm/mach-shmobile/setup-r8a7791.c        |    1 
 arch/arm/mach-shmobile/smp-r8a7791.c          |   62 +++++++++++++++++++++++++
 4 files changed, 65 insertions(+)

--- 0007/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-10-01 16:38:50.000000000 +0900
@@ -38,6 +38,7 @@ smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o platsmp-scu.o
 smp-$(CONFIG_ARCH_R8A7790)	+= smp-r8a7790.o platsmp-apmu.o
+smp-$(CONFIG_ARCH_R8A7791)	+= smp-r8a7791.o platsmp-apmu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # IRQ objects
--- 0002/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a7791.h	2013-10-01 16:38:50.000000000 +0900
@@ -5,5 +5,6 @@ void r8a7791_add_standard_devices(void);
 void r8a7791_add_dt_devices(void);
 void r8a7791_clock_init(void);
 void r8a7791_init_early(void);
+extern struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
--- 0007/arch/arm/mach-shmobile/setup-r8a7791.c
+++ work/arch/arm/mach-shmobile/setup-r8a7791.c	2013-10-01 16:38:50.000000000 +0900
@@ -175,6 +175,7 @@ static const char *r8a7791_boards_compat
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= r8a7791_init_early,
 	.init_time	= rcar_gen2_timer_init,
 	.dt_compat	= r8a7791_boards_compat_dt,
--- /dev/null
+++ work/arch/arm/mach-shmobile/smp-r8a7791.c	2013-10-01 16:38:50.000000000 +0900
@@ -0,0 +1,62 @@
+/*
+ * SMP support for r8a7791
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_plat.h>
+#include <mach/common.h>
+#include <mach/r8a7791.h>
+
+#define RST		0xe6160000
+#define CA15BAR		0x0020
+#define CA15RESCNT	0x0040
+#define RAM		0xe6300000
+
+static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *p;
+	u32 bar;
+
+	/* let APMU code install data related to shmobile_boot_vector */
+	shmobile_smp_apmu_prepare_cpus(max_cpus);
+
+	/* RAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(RAM, shmobile_boot_size);
+	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	iounmap(p);
+
+	/* setup reset vectors */
+	p = ioremap_nocache(RST, 0x63);
+	bar = (RAM >> 8) & 0xfffffc00;
+	writel_relaxed(bar, p + CA15BAR);
+	writel_relaxed(bar | 0x10, p + CA15BAR);
+
+	/* enable clocks to all CPUs */
+	writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
+		       p + CA15RESCNT);
+	iounmap(p);
+}
+
+struct smp_operations r8a7791_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
+	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= shmobile_smp_cpu_disable,
+	.cpu_die		= shmobile_smp_apmu_cpu_die,
+	.cpu_kill		= shmobile_smp_apmu_cpu_kill,
+#endif
+};

  parent reply	other threads:[~2013-10-01  8:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-01  8:11 [PATCH 00/10] ARM: shmobile: r8a7791 SoC and Koelsch update V2 Magnus Damm
2013-10-01  8:11 ` [PATCH 01/10] ARM: shmobile: Introduce r8a7791_add_standard_devices() Magnus Damm
2013-10-03  2:36   ` Simon Horman
2013-10-01  8:12 ` [PATCH 02/10] ARM: shmobile: Use r8a7791_add_standard_devices() on Koelsch Magnus Damm
2013-10-03  4:20   ` Simon Horman
2013-10-01  8:12 ` [PATCH 03/10] ARM: shmobile: r8a7791 IRQC platform device support Magnus Damm
2013-10-03  2:37   ` Simon Horman
2013-10-01  8:12 ` [PATCH 04/10] ARM: shmobile: r8a7791 IRQC device tree node Magnus Damm
2013-10-03  2:43   ` Simon Horman
2013-10-01  8:12 ` [PATCH 05/10] ARM: shmobile: r8a7791 Arch timer " Magnus Damm
2013-10-03  2:44   ` Simon Horman
2013-10-01  8:12 ` [PATCH 06/10] ARM: shmobile: r8a7791 Arch timer workaround Magnus Damm
2013-10-03  3:45   ` Simon Horman
2013-10-01  8:12 ` [PATCH 07/10] ARM: shmobile: Use arch timer on Koelsch Magnus Damm
2013-10-03  4:21   ` Simon Horman
2013-10-01  8:13 ` [PATCH 08/10] ARM: shmobile: r8a7791 SMP device tree node Magnus Damm
2013-10-03  3:46   ` Simon Horman
2013-10-01  8:13 ` Magnus Damm [this message]
2013-10-03  3:47   ` [PATCH 09/10] ARM: shmobile: r8a7791 SMP support Simon Horman
2013-10-01  8:13 ` [PATCH 10/10] ARM: shmobile: Use SMP on Koelsch Magnus Damm
2013-10-03  4:22   ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131001081316.4136.4137.sendpatchset@w520 \
    --to=magnus.damm@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).