* [PATCH 0/3] Add USBHS support to Lager
@ 2013-10-07 23:27 Valentine Barshak
2013-10-08 1:21 ` Simon Horman
2014-09-09 10:16 ` カオ ミン ヒェップ
0 siblings, 2 replies; 3+ messages in thread
From: Valentine Barshak @ 2013-10-07 23:27 UTC (permalink / raw)
To: linux-sh
This patch set adds internal USB PHY support to RCAR Gen2 SoC, and
also enables USBHS for the Lager board.
The patches apply fine to the renesas-devel-20131004 tag of the renesas.git.
The first patch also applies fine to the usb.git at kernel.org.
It adds RCAR Gen2 phy driver, which is used to configure the shared USB
channels 0/2 and to control USBHS internal PHY.
All the drivers that use the shared USB channels (USBHS/USBSS/PCI USB host)
should acquire the USB phy first to set proper channel configuration.
The other two patches add USBHS support to Lager board, which requires
RCAR Gen2 phy driver.
Valentine Barshak (3):
usb: phy: Add RCAR Gen2 USB phy
arm: shmobile: r8a7790: Add USBHS clock support
arm: shmobile: lager: Add USBHS support
arch/arm/mach-shmobile/board-lager.c | 106 +++++++++
arch/arm/mach-shmobile/clock-r8a7790.c | 4 +
drivers/usb/phy/Kconfig | 14 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-rcar-gen2-usb.c | 271 ++++++++++++++++++++++++
include/linux/platform_data/usb-rcar-gen2-phy.h | 22 ++
6 files changed, 418 insertions(+)
create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
--
1.8.3.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 0/3] Add USBHS support to Lager
2013-10-07 23:27 [PATCH 0/3] Add USBHS support to Lager Valentine Barshak
@ 2013-10-08 1:21 ` Simon Horman
2014-09-09 10:16 ` カオ ミン ヒェップ
1 sibling, 0 replies; 3+ messages in thread
From: Simon Horman @ 2013-10-08 1:21 UTC (permalink / raw)
To: linux-sh
On Tue, Oct 08, 2013 at 03:27:00AM +0400, Valentine Barshak wrote:
> This patch set adds internal USB PHY support to RCAR Gen2 SoC, and
> also enables USBHS for the Lager board.
>
> The patches apply fine to the renesas-devel-20131004 tag of the renesas.git.
>
> The first patch also applies fine to the usb.git at kernel.org.
> It adds RCAR Gen2 phy driver, which is used to configure the shared USB
> channels 0/2 and to control USBHS internal PHY.
> All the drivers that use the shared USB channels (USBHS/USBSS/PCI USB host)
> should acquire the USB phy first to set proper channel configuration.
>
> The other two patches add USBHS support to Lager board, which requires
> RCAR Gen2 phy driver.
Hi Morimoto-san,
I could you review this series?
My assumption is that in the current form the first patch will
go through the USB tree while the latter patches will subsequently
go through (my) renesas tree.
> Valentine Barshak (3):
> usb: phy: Add RCAR Gen2 USB phy
> arm: shmobile: r8a7790: Add USBHS clock support
> arm: shmobile: lager: Add USBHS support
>
> arch/arm/mach-shmobile/board-lager.c | 106 +++++++++
> arch/arm/mach-shmobile/clock-r8a7790.c | 4 +
> drivers/usb/phy/Kconfig | 14 ++
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/phy-rcar-gen2-usb.c | 271 ++++++++++++++++++++++++
> include/linux/platform_data/usb-rcar-gen2-phy.h | 22 ++
> 6 files changed, 418 insertions(+)
> create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
> create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
>
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 0/3] Add USBHS support to Lager
2013-10-07 23:27 [PATCH 0/3] Add USBHS support to Lager Valentine Barshak
2013-10-08 1:21 ` Simon Horman
@ 2014-09-09 10:16 ` カオ ミン ヒェップ
1 sibling, 0 replies; 3+ messages in thread
From: カオ ミン ヒェップ @ 2014-09-09 10:16 UTC (permalink / raw)
To: linux-sh
Hello,
Sorry for bother you!
We are testing USB host 2.0 on Lager(R8a7790 SoC),
We realize that there is only a master USB HOST configured on default
config.
Slave devices is not configured on default config.
Could you please enable these CONFIGs?
For Hub:
CONFIG_USB_EHCI_ROOT_HUB_TT=y
For Usb memory:
CONFIG_USB_STORAGE=y
For: Keyboard, mouse:
CONFIG_INPUT_EVDEV=y
Best Regards,
Jinso/Cao Minh Hiep.
On 10/08/2013 08:27 AM, Valentine Barshak wrote:
> This patch set adds internal USB PHY support to RCAR Gen2 SoC, and
> also enables USBHS for the Lager board.
>
> The patches apply fine to the renesas-devel-20131004 tag of the renesas.git.
>
> The first patch also applies fine to the usb.git at kernel.org.
> It adds RCAR Gen2 phy driver, which is used to configure the shared USB
> channels 0/2 and to control USBHS internal PHY.
> All the drivers that use the shared USB channels (USBHS/USBSS/PCI USB host)
> should acquire the USB phy first to set proper channel configuration.
>
> The other two patches add USBHS support to Lager board, which requires
> RCAR Gen2 phy driver.
>
> Valentine Barshak (3):
> usb: phy: Add RCAR Gen2 USB phy
> arm: shmobile: r8a7790: Add USBHS clock support
> arm: shmobile: lager: Add USBHS support
>
> arch/arm/mach-shmobile/board-lager.c | 106 +++++++++
> arch/arm/mach-shmobile/clock-r8a7790.c | 4 +
> drivers/usb/phy/Kconfig | 14 ++
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/phy-rcar-gen2-usb.c | 271 ++++++++++++++++++++++++
> include/linux/platform_data/usb-rcar-gen2-phy.h | 22 ++
> 6 files changed, 418 insertions(+)
> create mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
> create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-09-09 10:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-07 23:27 [PATCH 0/3] Add USBHS support to Lager Valentine Barshak
2013-10-08 1:21 ` Simon Horman
2014-09-09 10:16 ` カオ ミン ヒェップ
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).