From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Thu, 21 Nov 2013 04:07:14 +0000 Subject: Re: [PATCH 01/05] ARM: shmobile: Add r8a7790 thermal device node to DTS Message-Id: <20131121040712.GJ31130@verge.net.au> List-Id: References: <20131120075921.23557.23231.sendpatchset@w520> <20131120075930.23557.3517.sendpatchset@w520> In-Reply-To: <20131120075930.23557.3517.sendpatchset@w520> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Magnus Damm Cc: linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org On Wed, Nov 20, 2013 at 04:59:30PM +0900, Magnus Damm wrote: > From: Magnus Damm > > Hook up the r8a7790 thermal sensor to the DTS. > > Signed-off-by: Magnus Damm Thanks, I will queue this up. Assuming all goes will I plan to push this and other updates today or tomorrow. > --- > > arch/arm/boot/dts/r8a7790.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > --- 0004/arch/arm/boot/dts/r8a7790.dtsi > +++ work/arch/arm/boot/dts/r8a7790.dtsi 2013-11-20 08:25:53.000000000 +0900 > @@ -162,6 +162,13 @@ > interrupt-controller; > }; > > + thermal@e61f0000 { > + compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; > + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; > + interrupt-parent = <&gic>; > + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > timer { > compatible = "arm,armv7-timer"; > interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >