From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Thu, 09 Jan 2014 09:02:27 +0000 Subject: Re: [PATCH 0/2] arm: shmobile: Add SATA support for Koelsch board Message-Id: <20140109090224.GA20661@verge.net.au> List-Id: References: <1387475843-25849-1-git-send-email-valentine.barshak@cogentembedded.com> In-Reply-To: <1387475843-25849-1-git-send-email-valentine.barshak@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-sh@vger.kernel.org On Wed, Jan 08, 2014 at 04:27:09PM +0900, Simon Horman wrote: > On Wed, Jan 08, 2014 at 04:18:12PM +0900, Magnus Damm wrote: > > On Fri, Dec 20, 2013 at 2:59 AM, Valentine Barshak > > wrote: > > > This adds SATA0/1 clocks to R8A7791 SoC and adds SATA0 to Koelsch boa= rd. > > > SATA1 is not available on Koelsch since MD24 selection is fixed to PC= Ie. > > > > > > It depends on the following commit available in the libata git tree: > > > https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h= =3Dfor-3.14&id=E67adb4e669db834c1f95cbdf99bb4e9ec8455b3 > > > > > > Valentine Barshak (2): > > > arm: shmobile: r8a7791: Add SATA clocks > > > arm: shmobile: koelsch: Add SATA support > > > > > > arch/arm/mach-shmobile/board-koelsch.c | 17 +++++++++++++++++ > > > arch/arm/mach-shmobile/clock-r8a7791.c | 19 +++++++++++++++++++ > > > 2 files changed, 36 insertions(+) > >=20 > > Hi Valentine and Simon, > >=20 > > I have now tested this Koelsch SATA series as well. It works well as > > long as the HDD is powered on at boot. When applying the patches I > > noticed that there were fewer collisions here due to no legacy clock > > status bit polling patch for r8a7791. > >=20 > > Acked-by: Magnus Damm > >=20 > > Simon, can you please work with Valentine to merge this series? >=20 > Sure. >=20 > Valentine, can you rebase and repost the series? And include an update to the Koelsch defconfig