linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH] ARM: shmobile: compile drivers/sh for CONFIG_ARCH_SHMOBILE_MULTI
Date: Tue, 14 Jan 2014 23:55:05 +0000	[thread overview]
Message-ID: <20140114235505.GD8769@verge.net.au> (raw)
In-Reply-To: <1389367095-7760-1-git-send-email-ben.dooks@codethink.co.uk>

On Tue, Jan 14, 2014 at 01:56:16PM +0000, Ben Dooks wrote:
> If the kernel is built to support multi-arm configurmation with shmobile
> support built in, then the drivers/sh is not built. This contains drivers
> that are essential to devices support by that configuration, including the
> PM runtime code in drivers/sh/pm_runtime.c (which implicitly enables the
> bus clocks for all devices).
> 
> If CONFIG_ARCH_SHMOBILE_MULTI then build the drivers/sh directory,
> but ensure that bits that may conflict (drivers/sh/clk if the common
> clock framework is not enabled) are built.
> 
> The ARCH_SHMOBILE_MULTI was added by efacfce5f8a ("ARM: shmobile: Introduce
> ARCH_SHMOBILE_MULTI") but this has only just recently been found due to
> changes currently only in Simon Horman's tree. This patch is a partial
> revert of bf98c1eac1d4a6b ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")
> to address the issue of drivers not being built.
> 
> It is also possible the drivers/sh/intc will also need to be built
> however the lack of intc is not causing a number of drivers to fail
> to properly manage their clocks. This is left as an future patch for
>that is perfectly fine. someone who understands that part of the code.

Laurent, what are you feelings on this?

> Cc: Linus SH list <linux-sh@vger.kernel.org>
> Cc: laurent.pinchart+renesas@ideasonboard.com
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
>  drivers/Makefile    | 2 +-
>  drivers/sh/Makefile | 3 +++
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 8e3b8b0..3cc8214 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -118,7 +118,7 @@ obj-$(CONFIG_SGI_SN)		+= sn/
>  obj-y				+= firmware/
>  obj-$(CONFIG_CRYPTO)		+= crypto/
>  obj-$(CONFIG_SUPERH)		+= sh/
> -obj-$(CONFIG_ARCH_SHMOBILE_LEGACY)	+= sh/
> +obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
>  ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
>  obj-y				+= clocksource/
>  endif
> diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
> index fc67f56..b4d588c 100644
> --- a/drivers/sh/Makefile
> +++ b/drivers/sh/Makefile
> @@ -3,7 +3,10 @@
>  #
>  obj-y	:= intc/
>  
> +ifneq ($(CONFIG_COMMON_CLK),y)
>  obj-$(CONFIG_HAVE_CLK)		+= clk/
> +endif
> +
>  obj-$(CONFIG_MAPLE)		+= maple/
>  obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
>  
> -- 
> 1.8.5.2
> 

  parent reply	other threads:[~2014-01-14 23:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-10 15:18 [PATCH] ARM: shmobile: compile drivers/sh for CONFIG_ARCH_SHMOBILE_MULTI Ben Dooks
2014-01-11 13:06 ` Ben Dooks
2014-01-12 21:54   ` Laurent Pinchart
2014-01-12 22:01     ` Laurent Pinchart
2014-01-13  6:45       ` Ben Dooks
2014-01-13 22:37         ` Laurent Pinchart
2014-01-17  0:49         ` Mark Brown
2014-01-13  0:30 ` Simon Horman
2014-01-13  6:23   ` Ben Dooks
2014-01-13  9:28 ` Geert Uytterhoeven
2014-01-13  9:35   ` Ben Dooks
2014-01-13  9:47     ` Geert Uytterhoeven
2014-01-14 13:56 ` Ben Dooks
2014-01-14 23:55 ` Simon Horman [this message]
2014-01-15 19:46 ` Laurent Pinchart
2014-01-16 10:38 ` Ben Dooks
2014-01-16 17:25 ` Ben Dooks
2014-01-19 21:44 ` Laurent Pinchart
2014-01-20 11:47 ` Mark Brown
2014-01-20 12:01 ` Ben Dooks
2014-01-20 12:54 ` Mark Brown
2014-01-20 13:19   ` Ben Dooks
2014-01-20 15:48     ` Laurent Pinchart
2014-01-20 15:56       ` Mark Brown
2014-01-20 22:52         ` Laurent Pinchart
2014-03-11 19:15           ` Geert Uytterhoeven
2014-03-12 14:18             ` Laurent Pinchart
2014-03-12 15:28               ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140114235505.GD8769@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).