* [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree
@ 2014-01-14 17:05 Valentine Barshak
2014-01-14 17:05 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch " Valentine Barshak
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Valentine Barshak @ 2014-01-14 17:05 UTC (permalink / raw)
To: linux-sh
This adds SATA nodes to r8a7790.dtsi and enables SATA1 in r8a7790-lager.dts.
In order for this to work the following patches are also needed:
* R-Car Gen2 SATA phy support:
https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
* a couple of MSTP clock fixes:
http://marc.info/?l=linux-sh&m\x138823255807611&w=2
Valentine Barshak (2):
ARM: dts: r8a7790: Add SATA nodes to r8a7790.dtsi
ARM: dts: lager: Enable SATA1 in r8a7790-lager.dts
arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++
arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++
2 files changed, 22 insertions(+)
--
1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch device tree
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
@ 2014-01-14 17:05 ` Valentine Barshak
2014-01-16 6:47 ` Magnus Damm
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Valentine Barshak @ 2014-01-14 17:05 UTC (permalink / raw)
To: linux-sh
This adds SATA nodes to r8a7791.dtsi and enables SATA0 in r8a7791-koelsch.dts.
In order for this to work the following patches are also needed:
* R-Car Gen2 SATA phy support:
https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
* a couple of MSTP clock fixes:
http://marc.info/?l=linux-sh&m\x138823255807611&w=2
Valentine Barshak (2):
ARM: dts: r8a7791: Add SATA nodes to r8a7791.dtsi
ARM: dts: koelsch: Enable SATA0 in r8a7791-koelsch.dts
arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
arch/arm/boot/dts/r8a7791.dtsi | 18 ++++++++++++++++++
2 files changed, 22 insertions(+)
--
1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch device tree
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
2014-01-14 17:05 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch " Valentine Barshak
@ 2014-01-16 6:47 ` Magnus Damm
2014-01-16 6:59 ` Simon Horman
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Magnus Damm @ 2014-01-16 6:47 UTC (permalink / raw)
To: linux-sh
On Wed, Jan 15, 2014 at 2:05 AM, Valentine Barshak
<valentine.barshak@cogentembedded.com> wrote:
> This adds SATA nodes to r8a7791.dtsi and enables SATA0 in r8a7791-koelsch.dts.
> In order for this to work the following patches are also needed:
> * R-Car Gen2 SATA phy support:
> https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
> * a couple of MSTP clock fixes:
> http://marc.info/?l=linux-sh&m\x138823255807611&w=2
>
> Valentine Barshak (2):
> ARM: dts: r8a7791: Add SATA nodes to r8a7791.dtsi
> ARM: dts: koelsch: Enable SATA0 in r8a7791-koelsch.dts
>
> arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
> arch/arm/boot/dts/r8a7791.dtsi | 18 ++++++++++++++++++
> 2 files changed, 22 insertions(+)
Hey Valentine,
Thanks for your patches. I have now tested this series on my Koelsch
board and it works well.
Acked-by: Magnus Damm <damm@opensource.se>
Cheers,
/ magnus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch device tree
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
2014-01-14 17:05 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch " Valentine Barshak
2014-01-16 6:47 ` Magnus Damm
@ 2014-01-16 6:59 ` Simon Horman
2014-01-17 2:50 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager " Magnus Damm
2014-01-17 5:27 ` Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Simon Horman @ 2014-01-16 6:59 UTC (permalink / raw)
To: linux-sh
On Thu, Jan 16, 2014 at 03:47:27PM +0900, Magnus Damm wrote:
> On Wed, Jan 15, 2014 at 2:05 AM, Valentine Barshak
> <valentine.barshak@cogentembedded.com> wrote:
> > This adds SATA nodes to r8a7791.dtsi and enables SATA0 in r8a7791-koelsch.dts.
> > In order for this to work the following patches are also needed:
> > * R-Car Gen2 SATA phy support:
> > https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
> > * a couple of MSTP clock fixes:
> > http://marc.info/?l=linux-sh&m\x138823255807611&w=2
> >
> > Valentine Barshak (2):
> > ARM: dts: r8a7791: Add SATA nodes to r8a7791.dtsi
> > ARM: dts: koelsch: Enable SATA0 in r8a7791-koelsch.dts
> >
> > arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
> > arch/arm/boot/dts/r8a7791.dtsi | 18 ++++++++++++++++++
> > 2 files changed, 22 insertions(+)
>
> Hey Valentine,
>
> Thanks for your patches. I have now tested this series on my Koelsch
> board and it works well.
>
> Acked-by: Magnus Damm <damm@opensource.se>
Thanks Magnus.
I will queue up these patches with the "dts:" in their subjects changed
to "shmobile:"
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
` (2 preceding siblings ...)
2014-01-16 6:59 ` Simon Horman
@ 2014-01-17 2:50 ` Magnus Damm
2014-01-17 5:27 ` Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Magnus Damm @ 2014-01-17 2:50 UTC (permalink / raw)
To: linux-sh
On Wed, Jan 15, 2014 at 2:05 AM, Valentine Barshak
<valentine.barshak@cogentembedded.com> wrote:
> This adds SATA nodes to r8a7790.dtsi and enables SATA1 in r8a7790-lager.dts.
> In order for this to work the following patches are also needed:
> * R-Car Gen2 SATA phy support:
> https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
> * a couple of MSTP clock fixes:
> http://marc.info/?l=linux-sh&m\x138823255807611&w=2
>
> Valentine Barshak (2):
> ARM: dts: r8a7790: Add SATA nodes to r8a7790.dtsi
> ARM: dts: lager: Enable SATA1 in r8a7790-lager.dts
Looking good, just boot tested this on my Lager board and it works as expected.
Acked-by: Magnus Damm <damm@opensource.se>
Thanks,
/ magnus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
` (3 preceding siblings ...)
2014-01-17 2:50 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager " Magnus Damm
@ 2014-01-17 5:27 ` Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Simon Horman @ 2014-01-17 5:27 UTC (permalink / raw)
To: linux-sh
On Fri, Jan 17, 2014 at 11:50:24AM +0900, Magnus Damm wrote:
> On Wed, Jan 15, 2014 at 2:05 AM, Valentine Barshak
> <valentine.barshak@cogentembedded.com> wrote:
> > This adds SATA nodes to r8a7790.dtsi and enables SATA1 in r8a7790-lager.dts.
> > In order for this to work the following patches are also needed:
> > * R-Car Gen2 SATA phy support:
> > https://git.kernel.org/cgit/linux/kernel/git/tj/libata.git/commit/?h=for-3.14&idæ7adb4e669db834c1f95cbdf99bb4e9ec8455b3
> > * a couple of MSTP clock fixes:
> > http://marc.info/?l=linux-sh&m\x138823255807611&w=2
> >
> > Valentine Barshak (2):
> > ARM: dts: r8a7790: Add SATA nodes to r8a7790.dtsi
> > ARM: dts: lager: Enable SATA1 in r8a7790-lager.dts
>
> Looking good, just boot tested this on my Lager board and it works as expected.
>
> Acked-by: Magnus Damm <damm@opensource.se>
Thanks, I have queued these up.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-17 5:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-14 17:05 [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager device tree Valentine Barshak
2014-01-14 17:05 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7791 Koelsch " Valentine Barshak
2014-01-16 6:47 ` Magnus Damm
2014-01-16 6:59 ` Simon Horman
2014-01-17 2:50 ` [PATCH 0/2] ARM: dts: Add SATA to R8A7790 Lager " Magnus Damm
2014-01-17 5:27 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).