From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v3 1/2] ARM: shmobile: r8a7790 dtsi: Add GPIO clocks
Date: Tue, 13 May 2014 01:49:18 +0000 [thread overview]
Message-ID: <20140513014917.GD10973@verge.net.au> (raw)
On Wed, Apr 23, 2014 at 10:25:27AM +0200, Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Sorry for missing this.
I have queued it up.
> ---
> v3:
> - Add Acked-by
> - Bindings have been accepted in
> git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git#for-next
>
> v2:
> - No changes
> ---
> arch/arm/boot/dts/r8a7790.dtsi | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index d38d70339149..7ff29601f962 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -117,6 +117,7 @@
> gpio-ranges = <&pfc 0 0 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
> };
>
> gpio1: gpio@e6051000 {
> @@ -128,6 +129,7 @@
> gpio-ranges = <&pfc 0 32 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
> };
>
> gpio2: gpio@e6052000 {
> @@ -139,6 +141,7 @@
> gpio-ranges = <&pfc 0 64 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
> };
>
> gpio3: gpio@e6053000 {
> @@ -150,6 +153,7 @@
> gpio-ranges = <&pfc 0 96 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
> };
>
> gpio4: gpio@e6054000 {
> @@ -161,6 +165,7 @@
> gpio-ranges = <&pfc 0 128 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
> };
>
> gpio5: gpio@e6055000 {
> @@ -172,6 +177,7 @@
> gpio-ranges = <&pfc 0 160 32>;
> #interrupt-cells = <2>;
> interrupt-controller;
> + clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
> };
>
> thermal@e61f0000 {
> @@ -802,14 +808,19 @@
> mstp9_clks: mstp9_clks@e6150994 {
> compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
> - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
> + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
> <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
> #clock-cells = <1>;
> renesas,clock-indices = <
> + R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
> + R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
> R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
> R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
> >;
> clock-output-names > + "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
> "rcan1", "rcan0", "qspi_mod", "iic3",
> "i2c3", "i2c2", "i2c1", "i2c0";
> };
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next reply other threads:[~2014-05-13 1:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 1:49 Simon Horman [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-04-23 8:25 [PATCH v3 1/2] ARM: shmobile: r8a7790 dtsi: Add GPIO clocks Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140513014917.GD10973@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).