From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/08] ARM: shmobile: Move dma-register.h
Date: Tue, 20 May 2014 07:58:10 +0000 [thread overview]
Message-ID: <20140520080008.13851.55925.sendpatchset@w520> (raw)
In-Reply-To: <20140520075949.13851.42995.sendpatchset@w520>
From: Magnus Damm <damm+renesas@opensource.se>
Change location of dma-register.h so it can be used as #include
"dma-register.h" instead of the old style #include <mach/dma-register.h>.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
This DMAC header and the DMAC abstraction needs a rework, badly.
It is also not specific to ARM so it is a mystery to me why it ended
up under arch/arm...
arch/arm/mach-shmobile/dma-register.h | 84 ++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/dma-register.h | 84 --------------------
arch/arm/mach-shmobile/setup-r8a73a4.c | 2
arch/arm/mach-shmobile/setup-r8a7740.c | 2
arch/arm/mach-shmobile/setup-r8a7790.c | 2
arch/arm/mach-shmobile/setup-sh7372.c | 2
arch/arm/mach-shmobile/setup-sh73a0.c | 2
7 files changed, 89 insertions(+), 89 deletions(-)
--- /dev/null
+++ work/arch/arm/mach-shmobile/dma-register.h 2014-05-19 23:21:49.000000000 +0900
@@ -0,0 +1,84 @@
+/*
+ * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp
+ *
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DMA_REGISTER_H
+#define DMA_REGISTER_H
+
+/*
+ * Direct Memory Access Controller
+ */
+
+/* Transmit sizes and respective CHCR register values */
+enum {
+ XMIT_SZ_8BIT = 0,
+ XMIT_SZ_16BIT = 1,
+ XMIT_SZ_32BIT = 2,
+ XMIT_SZ_64BIT = 7,
+ XMIT_SZ_128BIT = 3,
+ XMIT_SZ_256BIT = 4,
+ XMIT_SZ_512BIT = 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_ts_shift[] = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_64BIT] = 3,
+ [XMIT_SZ_128BIT] = 4,
+ [XMIT_SZ_256BIT] = 5,
+ [XMIT_SZ_512BIT] = 6,
+};
+
+#define TS_LOW_BIT 0x3 /* --xx */
+#define TS_HI_BIT 0xc /* xx-- */
+
+#define TS_LOW_SHIFT (3)
+#define TS_HI_SHIFT (20 - 2) /* 2 bits for shifted low TS */
+
+#define TS_INDEX2VAL(i) \
+ ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
+ (((i) & TS_HI_BIT) << TS_HI_SHIFT))
+
+#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
+#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
+
+
+/*
+ * USB High-Speed DMAC
+ */
+/* Transmit sizes and respective CHCR register values */
+enum {
+ USBTS_XMIT_SZ_8BYTE = 0,
+ USBTS_XMIT_SZ_16BYTE = 1,
+ USBTS_XMIT_SZ_32BYTE = 2,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+static const unsigned int dma_usbts_shift[] = {
+ [USBTS_XMIT_SZ_8BYTE] = 3,
+ [USBTS_XMIT_SZ_16BYTE] = 4,
+ [USBTS_XMIT_SZ_32BYTE] = 5,
+};
+
+#define USBTS_LOW_BIT 0x3 /* --xx */
+#define USBTS_HI_BIT 0x0 /* ---- */
+
+#define USBTS_LOW_SHIFT 6
+#define USBTS_HI_SHIFT 0
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+#endif /* DMA_REGISTER_H */
--- 0001/arch/arm/mach-shmobile/include/mach/dma-register.h
+++ /dev/null 2013-06-03 21:41:10.638032047 +0900
@@ -1,84 +0,0 @@
-/*
- * SH-ARM CPU-specific DMA definitions, used by both DMA drivers
- *
- * Copyright (C) 2012 Renesas Solutions Corp
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * Based on arch/sh/include/cpu-sh4/cpu/dma-register.h
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef DMA_REGISTER_H
-#define DMA_REGISTER_H
-
-/*
- * Direct Memory Access Controller
- */
-
-/* Transmit sizes and respective CHCR register values */
-enum {
- XMIT_SZ_8BIT = 0,
- XMIT_SZ_16BIT = 1,
- XMIT_SZ_32BIT = 2,
- XMIT_SZ_64BIT = 7,
- XMIT_SZ_128BIT = 3,
- XMIT_SZ_256BIT = 4,
- XMIT_SZ_512BIT = 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_ts_shift[] = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_64BIT] = 3,
- [XMIT_SZ_128BIT] = 4,
- [XMIT_SZ_256BIT] = 5,
- [XMIT_SZ_512BIT] = 6,
-};
-
-#define TS_LOW_BIT 0x3 /* --xx */
-#define TS_HI_BIT 0xc /* xx-- */
-
-#define TS_LOW_SHIFT (3)
-#define TS_HI_SHIFT (20 - 2) /* 2 bits for shifted low TS */
-
-#define TS_INDEX2VAL(i) \
- ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\
- (((i) & TS_HI_BIT) << TS_HI_SHIFT))
-
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
-
-
-/*
- * USB High-Speed DMAC
- */
-/* Transmit sizes and respective CHCR register values */
-enum {
- USBTS_XMIT_SZ_8BYTE = 0,
- USBTS_XMIT_SZ_16BYTE = 1,
- USBTS_XMIT_SZ_32BYTE = 2,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-static const unsigned int dma_usbts_shift[] = {
- [USBTS_XMIT_SZ_8BYTE] = 3,
- [USBTS_XMIT_SZ_16BYTE] = 4,
- [USBTS_XMIT_SZ_32BYTE] = 5,
-};
-
-#define USBTS_LOW_BIT 0x3 /* --xx */
-#define USBTS_HI_BIT 0x0 /* ---- */
-
-#define USBTS_LOW_SHIFT 6
-#define USBTS_HI_SHIFT 0
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
-#endif /* DMA_REGISTER_H */
--- 0001/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c 2014-05-19 23:13:50.000000000 +0900
@@ -25,10 +25,10 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
-#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
+#include "dma-register.h"
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6050000, 0x9000),
--- 0001/arch/arm/mach-shmobile/setup-r8a7740.c
+++ work/arch/arm/mach-shmobile/setup-r8a7740.c 2014-05-19 23:13:24.000000000 +0900
@@ -31,7 +31,6 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
#include <mach/r8a7740.h>
#include <mach/pm-rmobile.h>
#include <mach/common.h>
@@ -40,6 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "dma-register.h"
static struct map_desc r8a7740_io_desc[] __initdata = {
/*
--- 0004/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c 2014-05-19 23:12:58.000000000 +0900
@@ -27,10 +27,10 @@
#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
-#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+#include "dma-register.h"
/* Audio-DMAC */
#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
--- 0005/arch/arm/mach-shmobile/setup-sh7372.c
+++ work/arch/arm/mach-shmobile/setup-sh7372.c 2014-05-19 23:18:22.000000000 +0900
@@ -33,7 +33,6 @@
#include <linux/pm_domain.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/sh_ipmmu.h>
-#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
#include <mach/common.h>
@@ -41,6 +40,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "dma-register.h"
static struct map_desc sh7372_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
--- 0005/arch/arm/mach-shmobile/setup-sh73a0.c
+++ work/arch/arm/mach-shmobile/setup-sh73a0.c 2014-05-19 23:18:39.000000000 +0900
@@ -32,7 +32,6 @@
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
@@ -40,6 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "dma-register.h"
static struct map_desc sh73a0_io_desc[] __initdata = {
/* create a 1:1 entity map for 0xe6xxxxxx
next prev parent reply other threads:[~2014-05-20 7:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-20 7:59 [PATCH 00/08] ARM: shmobile: Rework include path (Try 2, Part 1) Magnus Damm
2014-05-20 7:58 ` Magnus Damm [this message]
2014-05-20 7:58 ` [PATCH 03/08] ARM: shmobile: Move clock.h Magnus Damm
2014-05-20 7:58 ` [PATCH 04/08] ARM: shmobile: Move most of irqs.h, keep some for pinctl Magnus Damm
2014-05-20 7:58 ` [PATCH 05/08] ARM: shmobile: Move common.h Magnus Damm
2014-05-20 7:58 ` [PATCH 06/08] ARM: shmobile: Move pm-rmobile.h, cleanup sh73xx.h Magnus Damm
2014-05-20 7:59 ` [PATCH 07/08] ARM: shmobile: Move pm-rcar.h, cleanup r8a7779 case Magnus Damm
2014-05-20 7:59 ` [PATCH 08/08] ARM: shmobile: Move rcar-gen2.h, cleanup r8a7790 case Magnus Damm
2014-05-20 7:59 ` [PATCH 01/08] ARM: shmobile: Move intc.h, cleanup sh_intc.h usage Magnus Damm
2014-06-06 9:11 ` [PATCH 00/08] ARM: shmobile: Rework include path (Try 2, Part 1) Geert Uytterhoeven
2014-06-06 10:14 ` Simon Horman
2014-06-06 10:24 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140520080008.13851.55925.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).