* [PATCH v2 2/2] arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi
@ 2014-06-03 6:54 Yoshihiro Shimoda
2014-06-04 1:06 ` Simon Horman
0 siblings, 1 reply; 2+ messages in thread
From: Yoshihiro Shimoda @ 2014-06-03 6:54 UTC (permalink / raw)
To: linux-arm-kernel
This node depends on a generic phy driver of usb.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e06c486..985c253 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -902,4 +902,14 @@
#size-cells = <0>;
status = "disabled";
};
+
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7790";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ phys = <&usbphy 1 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2 2/2] arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi
2014-06-03 6:54 [PATCH v2 2/2] arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi Yoshihiro Shimoda
@ 2014-06-04 1:06 ` Simon Horman
0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2014-06-04 1:06 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jun 03, 2014 at 03:54:28PM +0900, Yoshihiro Shimoda wrote:
> This node depends on a generic phy driver of usb.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
I think it would be best if you resubmitted this patch once the
driver has been accepted. Likewise for the r8a7791 variant of this patch.
> ---
> arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index e06c486..985c253 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -902,4 +902,14 @@
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + xhci: usb@ee000000 {
> + compatible = "renesas,xhci-r8a7790";
> + reg = <0 0xee000000 0 0xc00>;
> + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
> + phys = <&usbphy 1 1>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> };
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-06-04 1:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-03 6:54 [PATCH v2 2/2] arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi Yoshihiro Shimoda
2014-06-04 1:06 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).