[PATCH v2 00/03] ARM: shmobile: r7s72100 / Genmai init delay update (V2)

[PATCH v2 00/03] ARM: shmobile: r7s72100 / Genmai init delay update (V2)

[Magnus Damm]

ARM: shmobile: r7s72100 / Genmai init delay update (V2)

[PATCH v2 01/03] ARM: shmobile: Update r7s72100 DTS to include CPU frequency
[PATCH v2 02/03] ARM: shmobile: Use shmobile_init_delay() on Genmai boards
[PATCH v2 03/03] ARM: shmobile: Use shmobile_init_delay() on r7s72100

These patches clean up the r7s72100 SoC and Genmai board code. The CPU
Frequency is put into DTS followed by SoC and board code that gets
adjusted to read out the frequency from DTS.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Written last week on top of renesas-devel-v3.15-rc7-20140528 but
 applies cleanly on top of renesas-devel-v3.15-rc8-20140605.

 Changes since V1:
 - Adjusted patch 3 to actually include the right code...

 arch/arm/boot/dts/r7s72100.dtsi                 |    1 +
 arch/arm/mach-shmobile/board-genmai-reference.c |    2 +-
 arch/arm/mach-shmobile/board-genmai.c           |    2 +-
 arch/arm/mach-shmobile/include/mach/r7s72100.h  |    1 -
 arch/arm/mach-shmobile/setup-r7s72100.c         |    7 +------
 5 files changed, 4 insertions(+), 9 deletions(-)

Re: [PATCH v2 00/03] ARM: shmobile: r7s72100 / Genmai init delay update (V2)

[Geert Uytterhoeven]

Hi Magnus,

On Fri, Jun 6, 2014 at 7:28 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
> ARM: shmobile: r7s72100 / Genmai init delay update (V2)
>
> [PATCH v2 01/03] ARM: shmobile: Update r7s72100 DTS to include CPU frequency
> [PATCH v2 02/03] ARM: shmobile: Use shmobile_init_delay() on Genmai boards
> [PATCH v2 03/03] ARM: shmobile: Use shmobile_init_delay() on r7s72100
>
> These patches clean up the r7s72100 SoC and Genmai board code. The CPU
> Frequency is put into DTS followed by SoC and board code that gets
> adjusted to read out the frequency from DTS.

Thanks, now 03/03 looks fine, too!

> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v2 00/03] ARM: shmobile: r7s72100 / Genmai init delay update (V2)

[Simon Horman]

On Fri, Jun 06, 2014 at 08:39:55AM +0200, Geert Uytterhoeven wrote:
> Hi Magnus,
> 
> On Fri, Jun 6, 2014 at 7:28 AM, Magnus Damm <magnus.damm@gmail.com> wrote:
> > ARM: shmobile: r7s72100 / Genmai init delay update (V2)
> >
> > [PATCH v2 01/03] ARM: shmobile: Update r7s72100 DTS to include CPU frequency
> > [PATCH v2 02/03] ARM: shmobile: Use shmobile_init_delay() on Genmai boards
> > [PATCH v2 03/03] ARM: shmobile: Use shmobile_init_delay() on r7s72100
> >
> > These patches clean up the r7s72100 SoC and Genmai board code. The CPU
> > Frequency is put into DTS followed by SoC and board code that gets
> > adjusted to read out the frequency from DTS.
> 
> Thanks, now 03/03 looks fine, too!
> 
> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> 
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Good morning :)

I have queued these up.