From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v2 8/8] ARM: shmobile: r8a7791: Add DMAC devices to DT
Date: Fri, 08 Aug 2014 02:19:35 +0000 [thread overview]
Message-ID: <20140808021932.GA23715@verge.net.au> (raw)
On Sat, Jul 19, 2014 at 01:50:25AM +0200, Laurent Pinchart wrote:
> Instantiate the two system DMA controllers in the r8a7791 device tree.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Thanks. As the bindings have been merged I have queued up this patch for
v3.18.
> ---
>
> Changes since v1:
>
> - Remove ch15 from interrupt names
> ---
> arch/arm/boot/dts/r8a7791.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
> index 56841d3..9cbe5f8 100644
> --- a/arch/arm/boot/dts/r8a7791.dtsi
> +++ b/arch/arm/boot/dts/r8a7791.dtsi
> @@ -238,6 +238,66 @@
> <0 17 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + dmac0: dma-controller@e6700000 {
> + compatible = "renesas,rcar-dmac";
> + reg = <0 0xe6700000 0 0x20000>;
> + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
> + 0 200 IRQ_TYPE_LEVEL_HIGH
> + 0 201 IRQ_TYPE_LEVEL_HIGH
> + 0 202 IRQ_TYPE_LEVEL_HIGH
> + 0 203 IRQ_TYPE_LEVEL_HIGH
> + 0 204 IRQ_TYPE_LEVEL_HIGH
> + 0 205 IRQ_TYPE_LEVEL_HIGH
> + 0 206 IRQ_TYPE_LEVEL_HIGH
> + 0 207 IRQ_TYPE_LEVEL_HIGH
> + 0 208 IRQ_TYPE_LEVEL_HIGH
> + 0 209 IRQ_TYPE_LEVEL_HIGH
> + 0 210 IRQ_TYPE_LEVEL_HIGH
> + 0 211 IRQ_TYPE_LEVEL_HIGH
> + 0 212 IRQ_TYPE_LEVEL_HIGH
> + 0 213 IRQ_TYPE_LEVEL_HIGH
> + 0 214 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "error",
> + "ch0", "ch1", "ch2", "ch3",
> + "ch4", "ch5", "ch6", "ch7",
> + "ch8", "ch9", "ch10", "ch11",
> + "ch12", "ch13", "ch14";
> + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
> + clock-names = "fck";
> + #dma-cells = <1>;
> + dma-channels = <15>;
> + };
> +
> + dmac1: dma-controller@e6720000 {
> + compatible = "renesas,rcar-dmac";
> + reg = <0 0xe6720000 0 0x20000>;
> + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
> + 0 216 IRQ_TYPE_LEVEL_HIGH
> + 0 217 IRQ_TYPE_LEVEL_HIGH
> + 0 218 IRQ_TYPE_LEVEL_HIGH
> + 0 219 IRQ_TYPE_LEVEL_HIGH
> + 0 308 IRQ_TYPE_LEVEL_HIGH
> + 0 309 IRQ_TYPE_LEVEL_HIGH
> + 0 310 IRQ_TYPE_LEVEL_HIGH
> + 0 311 IRQ_TYPE_LEVEL_HIGH
> + 0 312 IRQ_TYPE_LEVEL_HIGH
> + 0 313 IRQ_TYPE_LEVEL_HIGH
> + 0 314 IRQ_TYPE_LEVEL_HIGH
> + 0 315 IRQ_TYPE_LEVEL_HIGH
> + 0 316 IRQ_TYPE_LEVEL_HIGH
> + 0 317 IRQ_TYPE_LEVEL_HIGH
> + 0 318 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "error",
> + "ch0", "ch1", "ch2", "ch3",
> + "ch4", "ch5", "ch6", "ch7",
> + "ch8", "ch9", "ch10", "ch11",
> + "ch12", "ch13", "ch14";
> + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
> + clock-names = "fck";
> + #dma-cells = <1>;
> + dma-channels = <15>;
> + };
> +
> /* The memory map in the User's Manual maps the cores to bus numbers */
> i2c0: i2c@e6508000 {
> #address-cells = <1>;
> --
> 1.8.5.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next reply other threads:[~2014-08-08 2:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-08 2:19 Simon Horman [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-07-18 23:50 [PATCH v2 8/8] ARM: shmobile: r8a7791: Add DMAC devices to DT Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140808021932.GA23715@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).