From: Mike Turquette <mturquette@linaro.org>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH RESEND v3] clk: shmobile: sh73a0 common clock framework implementation
Date: Tue, 09 Sep 2014 20:10:30 +0000 [thread overview]
Message-ID: <20140909201030.19023.42763@quantum> (raw)
In-Reply-To: <1410196339-17478-1-git-send-email-ulrich.hecht+renesas@gmail.com>
Quoting Simon Horman (2014-09-08 18:54:58)
> On Mon, Sep 08, 2014 at 07:12:19PM +0200, Ulrich Hecht wrote:
> > Driver for the SH73A0's clocks that are too specific to be supported by a
> > generic driver.
> >
> > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> > ---
> >
> > Hi!
> >
> > This fell by the wayside, perhaps because I reset the version number...
> >
> > It has been broken out from "[PATCH v2 00/10] sh73a0 common clock framework
> > implementation" and should go through Simon's tree as discussed earlier.
>
> Thanks, I believe I need an Ack from Mike before I take this patch.
Acked-by: Mike Turquette <mturquette@linaro.org>
>
> >
> > CU
> > Uli
> >
> >
> > .../bindings/clock/renesas,sh73a0-cpg-clocks.txt | 31 ++++
> > drivers/clk/shmobile/Makefile | 1 +
> > drivers/clk/shmobile/clk-sh73a0.c | 202 +++++++++++++++++++++
> > 3 files changed, 234 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> > create mode 100644 drivers/clk/shmobile/clk-sh73a0.c
> >
> > diff --git a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> > new file mode 100644
> > index 0000000..6b8dece
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
> > @@ -0,0 +1,31 @@
> > +These bindings should be considered EXPERIMENTAL for now.
> > +
> > +* Renesas SH73A0 Clock Pulse Generator (CPG)
> > +
> > +The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
> > +and several fixed ratio dividers.
> > +
> > +Required Properties:
> > +
> > + - compatible: Must be "renesas,sh73a0-cpg-clocks"
> > +
> > + - reg: Base address and length of the memory resource used by the CPG
> > +
> > + - clocks: Reference to the parent clocks
> > + - #clock-cells: Must be 1
> > + - clock-output-names: The names of the clocks. Supported clocks are "main",
> > + "pll0", "pll1", "pll2", "pll3", "z", "dsi0phy", "dsi1phy", and "twd"
> > +
> > +
> > +Example
> > +-------
> > +
> > + cpg_clocks: cpg_clocks@e6150000 {
> > + compatible = "renesas,sh73a0-cpg-clocks";
> > + reg = <0 0xe6150000 0 0x10000>;
> > + clocks = <&extal1_clk>, <&extal2_clk>;
> > + #clock-cells = <1>;
> > + clock-output-names = "main", "pll0", "pll1", "pll2",
> > + "pll3", "z", "dsi0phy", "dsi1phy",
> > + "twd";
> > + };
> > diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
> > index 531d4f6..0c4fd11 100644
> > --- a/drivers/clk/shmobile/Makefile
> > +++ b/drivers/clk/shmobile/Makefile
> > @@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
> > obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
> > obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
> > obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o
> > +obj-$(CONFIG_ARCH_SH73A0) += clk-sh73a0.o
> > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
> > obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
> > # for emply built-in.o
> > diff --git a/drivers/clk/shmobile/clk-sh73a0.c b/drivers/clk/shmobile/clk-sh73a0.c
> > new file mode 100644
> > index 0000000..9d45e9d
> > --- /dev/null
> > +++ b/drivers/clk/shmobile/clk-sh73a0.c
> > @@ -0,0 +1,202 @@
> > +/*
> > + * sh73a0 Core CPG Clocks
> > + *
> > + * Copyright (C) 2014 Ulrich Hecht
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; version 2 of the License.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/clkdev.h>
> > +#include <linux/clk/shmobile.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct sh73a0_cpg {
> > + struct clk_onecell_data data;
> > + spinlock_t lock;
> > + void __iomem *reg;
> > +};
> > +
> > +#define CPG_FRQCRA 0x00
> > +#define CPG_FRQCRB 0x04
> > +#define CPG_SD0CKCR 0x74
> > +#define CPG_SD1CKCR 0x78
> > +#define CPG_SD2CKCR 0x7c
> > +#define CPG_PLLECR 0xd0
> > +#define CPG_PLL0CR 0xd8
> > +#define CPG_PLL1CR 0x28
> > +#define CPG_PLL2CR 0x2c
> > +#define CPG_PLL3CR 0xdc
> > +#define CPG_CKSCR 0xc0
> > +#define CPG_DSI0PHYCR 0x6c
> > +#define CPG_DSI1PHYCR 0x70
> > +
> > +#define CLK_ENABLE_ON_INIT BIT(0)
> > +
> > +struct div4_clk {
> > + const char *name;
> > + const char *parent;
> > + unsigned int reg;
> > + unsigned int shift;
> > + unsigned int mask;
> > + int flags;
> > +};
> > +
> > +static struct div4_clk div4_clks[] = {
> > + { "zg", "pll0", CPG_FRQCRA, 16, 0x0d7f, CLK_ENABLE_ON_INIT },
> > + { "m3", "pll1", CPG_FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT },
> > + { "b", "pll1", CPG_FRQCRA, 8, 0x0dff, CLK_ENABLE_ON_INIT },
> > + { "m1", "pll1", CPG_FRQCRA, 4, 0x1dff, 0 },
> > + { "m2", "pll1", CPG_FRQCRA, 0, 0x1dff, 0 },
> > + { "z", "pll0", CPG_FRQCRB, 24, 0x097f, 0 },
> > + { "zx", "pll1", CPG_FRQCRB, 12, 0x0dff, 0 },
> > + { "hp", "pll1", CPG_FRQCRB, 4, 0x0dff, 0 },
> > + { NULL, 0, 0, 0, 0 },
> > +};
> > +
> > +static const struct clk_div_table div4_div_table[] = {
> > + { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
> > + { 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 },
> > + { 12, 7 }, { 0, 0 }
> > +};
> > +
> > +static struct clk * __init
> > +sh73a0_cpg_register_clock(struct device_node *np, struct sh73a0_cpg *cpg,
> > + const char *name)
> > +{
> > + const struct clk_div_table *table = NULL;
> > + const char *parent_name;
> > + unsigned int shift, reg;
> > + unsigned int mult = 1;
> > + unsigned int div = 1;
> > +
> > + if (!strcmp(name, "main")) {
> > + /* extal1, extal1_div2, extal2, extal2_div2 */
> > + parent_name = of_clk_get_parent_name(np,
> > + (clk_readl(cpg->reg + CPG_CKSCR) >> 28) & 3);
> > + } else if (!strncmp(name, "pll", 3)) {
> > + void __iomem *enable_reg = cpg->reg;
> > + u32 enable_bit = name[3] - '0';
> > +
> > + parent_name = "main";
> > + switch (enable_bit) {
> > + case 0:
> > + enable_reg += CPG_PLL0CR;
> > + break;
> > + case 1:
> > + enable_reg += CPG_PLL1CR;
> > + break;
> > + case 2:
> > + enable_reg += CPG_PLL2CR;
> > + break;
> > + case 3:
> > + enable_reg += CPG_PLL3CR;
> > + break;
> > + default:
> > + return ERR_PTR(-EINVAL);
> > + }
> > + if (clk_readl(cpg->reg + CPG_PLLECR) & BIT(enable_bit)) {
> > + mult = ((clk_readl(enable_reg) >> 24) & 0x3f) + 1;
> > + /* handle CFG bit for PLL1 and PLL2 */
> > + if (enable_bit = 1 || enable_bit = 2)
> > + if (clk_readl(enable_reg) & BIT(20))
> > + mult *= 2;
> > + }
> > + } else if (!strcmp(name, "dsi0phy") || !strcmp(name, "dsi1phy")) {
> > + u32 phy_no = name[3] - '0';
> > + void __iomem *dsi_reg = cpg->reg +
> > + (phy_no ? CPG_DSI1PHYCR : CPG_DSI0PHYCR);
> > +
> > + parent_name = phy_no ? "dsi1pck" : "dsi0pck";
> > + div = __raw_readl(dsi_reg);
> > + if (!(div & 0xb8000))
> > + div = 1;
> > + else
> > + div = (div & 0x3f) + 1;
> > + } else {
> > + struct div4_clk *c;
> > +
> > + for (c = div4_clks; c->name; c++) {
> > + if (!strcmp(name, c->name)) {
> > + parent_name = c->parent;
> > + table = div4_div_table;
> > + reg = c->reg;
> > + shift = c->shift;
> > + break;
> > + }
> > + }
> > + if (!c->name)
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + if (!table) {
> > + return clk_register_fixed_factor(NULL, name, parent_name, 0,
> > + mult, div);
> > + } else {
> > + return clk_register_divider_table(NULL, name, parent_name, 0,
> > + cpg->reg + reg, shift, 4, 0,
> > + table, &cpg->lock);
> > + }
> > +}
> > +
> > +static void __init sh73a0_cpg_clocks_init(struct device_node *np)
> > +{
> > + struct sh73a0_cpg *cpg;
> > + struct clk **clks;
> > + unsigned int i;
> > + int num_clks;
> > +
> > + num_clks = of_property_count_strings(np, "clock-output-names");
> > + if (num_clks < 0) {
> > + pr_err("%s: failed to count clocks\n", __func__);
> > + return;
> > + }
> > +
> > + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
> > + clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
> > + if (cpg = NULL || clks = NULL) {
> > + /* We're leaking memory on purpose, there's no point in cleaning
> > + * up as the system won't boot anyway.
> > + */
> > + return;
> > + }
> > +
> > + spin_lock_init(&cpg->lock);
> > +
> > + cpg->data.clks = clks;
> > + cpg->data.clk_num = num_clks;
> > +
> > + cpg->reg = of_iomap(np, 0);
> > + if (WARN_ON(cpg->reg = NULL))
> > + return;
> > +
> > + /* Set SDHI clocks to a known state */
> > + clk_writel(0x108, cpg->reg + CPG_SD0CKCR);
> > + clk_writel(0x108, cpg->reg + CPG_SD1CKCR);
> > + clk_writel(0x108, cpg->reg + CPG_SD2CKCR);
> > +
> > + for (i = 0; i < num_clks; ++i) {
> > + const char *name;
> > + struct clk *clk;
> > +
> > + of_property_read_string_index(np, "clock-output-names", i,
> > + &name);
> > +
> > + clk = sh73a0_cpg_register_clock(np, cpg, name);
> > + if (IS_ERR(clk))
> > + pr_err("%s: failed to register %s %s clock (%ld)\n",
> > + __func__, np->name, name, PTR_ERR(clk));
> > + else
> > + cpg->data.clks[i] = clk;
> > + }
> > +
> > + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
> > +}
> > +CLK_OF_DECLARE(sh73a0_cpg_clks, "renesas,sh73a0-cpg-clocks",
> > + sh73a0_cpg_clocks_init);
> > --
> > 1.8.4.5
> >
prev parent reply other threads:[~2014-09-09 20:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-08 17:12 [PATCH RESEND v3] clk: shmobile: sh73a0 common clock framework implementation Ulrich Hecht
2014-09-09 1:54 ` Simon Horman
2014-09-09 20:10 ` Mike Turquette [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140909201030.19023.42763@quantum \
--to=mturquette@linaro.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).