linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Cc: linux-media@vger.kernel.org,
	Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-sh@vger.kernel.org
Subject: Re: [PATCH v4] media: soc_camera: rcar_vin: Add BT.709 24-bit RGB888 input support
Date: Thu, 13 Nov 2014 06:33:05 +0000	[thread overview]
Message-ID: <20141113063303.GA30202@verge.net.au> (raw)
In-Reply-To: <1414767998-8508-1-git-send-email-ykaneko0929@gmail.com>

On Sat, Nov 01, 2014 at 12:06:38AM +0900, Yoshihiro Kaneko wrote:
> From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
> 
> Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>

Hi Guennadi,

this patch has been through a few revisions but this one seems
to make the reviewers happy. Could you take a look at it when you have
a chance?

> ---
> 
> This patch is against master branch of linuxtv.org/media_tree.git.
> 
> v4 [Yoshihiro Kaneko]
> * indent with a tab, not with spaces
> 
> v3 [Yoshihiro Kaneko]
> * fixes the detection of RGB input
> 
> v2 [Yoshihiro Kaneko]
> * remove unused definition as suggested by Sergei Shtylyov
> * use VNMC_INF_RGB888 directly instead of VNMC_INF_RGB_MASK as a bit-field
>   mask
> 
>  drivers/media/platform/soc_camera/rcar_vin.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c
> index 20defcb..7becec0 100644
> --- a/drivers/media/platform/soc_camera/rcar_vin.c
> +++ b/drivers/media/platform/soc_camera/rcar_vin.c
> @@ -74,6 +74,7 @@
>  #define VNMC_INF_YUV10_BT656	(2 << 16)
>  #define VNMC_INF_YUV10_BT601	(3 << 16)
>  #define VNMC_INF_YUV16		(5 << 16)
> +#define VNMC_INF_RGB888		(6 << 16)
>  #define VNMC_VUP		(1 << 10)
>  #define VNMC_IM_ODD		(0 << 3)
>  #define VNMC_IM_ODD_EVEN	(1 << 3)
> @@ -272,6 +273,10 @@ static int rcar_vin_setup(struct rcar_vin_priv *priv)
>  
>  	/* input interface */
>  	switch (icd->current_fmt->code) {
> +	case V4L2_MBUS_FMT_RGB888_1X24:
> +		/* BT.601/BT.709 24-bit RGB-888 */
> +		vnmc |= VNMC_INF_RGB888;
> +		break;
>  	case V4L2_MBUS_FMT_YUYV8_1X16:
>  		/* BT.601/BT.1358 16bit YCbCr422 */
>  		vnmc |= VNMC_INF_YUV16;
> @@ -331,6 +336,15 @@ static int rcar_vin_setup(struct rcar_vin_priv *priv)
>  	if (output_is_yuv)
>  		vnmc |= VNMC_BPS;
>  
> +	/*
> +	 * The above assumes YUV input, toggle BPS for RGB input.
> +	 * RGB inputs can be detected by checking that the most-significant
> +	 * two bits of INF are set. This corresponds to the bits
> +	 * set in VNMC_INF_RGB888.
> +	 */
> +	if ((vnmc & VNMC_INF_RGB888) = VNMC_INF_RGB888)
> +		vnmc ^= VNMC_BPS;
> +
>  	/* progressive or interlaced mode */
>  	interrupts = progressive ? VNIE_FIE | VNIE_EFE : VNIE_EFE;
>  
> @@ -1013,6 +1027,7 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx,
>  	case V4L2_MBUS_FMT_YUYV8_1X16:
>  	case V4L2_MBUS_FMT_YUYV8_2X8:
>  	case V4L2_MBUS_FMT_YUYV10_2X10:
> +	case V4L2_MBUS_FMT_RGB888_1X24:
>  		if (cam->extra_fmt)
>  			break;
>  
> -- 
> 1.9.1
> 

  reply	other threads:[~2014-11-13  6:33 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-31 15:06 [PATCH v4] media: soc_camera: rcar_vin: Add BT.709 24-bit RGB888 input support Yoshihiro Kaneko
2014-11-13  6:33 ` Simon Horman [this message]
2016-01-14 12:18 ` [PATCH v4] media: soc_camera: rcar_vin: Add ARGB8888 caputre format support Yoshihiro Kaneko
2016-01-23 18:38   ` Guennadi Liakhovetski
2016-01-24 11:27     ` Yoshihiro Kaneko
2016-01-24  3:55 ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141113063303.GA30202@verge.net.au \
    --to=horms@verge.net.au \
    --cc=g.liakhovetski@gmx.de \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=ykaneko0929@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).