[PATCH] i2c: slave: fix the example how to instantiate from userspace

[PATCH] i2c: slave: fix the example how to instantiate from userspace

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

I copied the wrong shell code into the documentation. Sorry to all who
tried to get sense out of this current example :/ Slight rewording while
we are here.

Reported-by: Tim Bakker <bakkert@mymail.vcu.edu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 Documentation/i2c/slave-interface | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface
index 02b086510b6c10..2dee4e2d62df19 100644
--- a/Documentation/i2c/slave-interface
+++ b/Documentation/i2c/slave-interface
@@ -31,10 +31,10 @@ User manual
 ===== 
 I2C slave backends behave like standard I2C clients. So, you can instantiate
-them like described in the document 'instantiating-devices'. A quick example
-for instantiating the slave-eeprom driver from userspace:
+them as described in the document 'instantiating-devices'. A quick example for
+instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1:
 
-  # echo 0-0064 > /sys/bus/i2c/drivers/i2c-slave-eeprom/bind
+  # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device
 
 Each backend should come with separate documentation to describe its specific
 behaviour and setup.
-- 
2.1.4

Re: [PATCH] i2c: slave: fix the example how to instantiate from userspace

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 449 bytes --]

On Mon, Jun 15, 2015 at 07:51:46PM +0200, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> I copied the wrong shell code into the documentation. Sorry to all who
> tried to get sense out of this current example :/ Slight rewording while
> we are here.
> 
> Reported-by: Tim Bakker <bakkert@mymail.vcu.edu>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied to for-current, thanks!


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]