From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Wed, 30 Sep 2015 08:33:25 +0000 Subject: Re: [PATCH 1/2] ARM: shmobile: r8a7794: add USB PHY DT support Message-Id: <20150930083324.GA3426@verge.net.au> List-Id: References: <1442100737.hcefR9HyDq@wasted.cogentembedded.com> <1590842.9hQm6l1zli@wasted.cogentembedded.com> <55F9F82E.4000809@cogentembedded.com> In-Reply-To: <55F9F82E.4000809@cogentembedded.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org On Thu, Sep 17, 2015 at 02:15:58AM +0300, Sergei Shtylyov wrote: > Hello. > > On 09/13/2015 01:50 AM, Sergei Shtylyov wrote: > > >Define the R8A7794 generic part of the USB PHY device node. It is up to the > >board file to enable the device. > > > >Signed-off-by: Sergei Shtylyov > > > >--- > > arch/arm/boot/dts/r8a7794.dtsi | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > >Index: renesas/arch/arm/boot/dts/r8a7794.dtsi > >=================================> >--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi > >+++ renesas/arch/arm/boot/dts/r8a7794.dtsi > >@@ -690,6 +690,25 @@ > > 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; > > }; > > > >+ usbphy: usb-phy@e6590100 { > >+ compatible = "renesas,usb-phy-r8a7794"; > >+ reg = <0 0xe6590100 0 0x100>; > >+ #address-cells = <1>; > >+ #size-cells = <0>; > >+ clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; > >+ clock-names = "usbhs"; > > Forgot to add "power-domains" prop here. :-( Are you planning to repost this?