SUPERH platform development
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH/RFC] Simplify Gen3 DU and VSP Kconfig bits
Date: Thu, 15 Oct 2015 07:11:20 +0000	[thread overview]
Message-ID: <20151015071120.11093.50169.sendpatchset@little-apple> (raw)

From: Magnus Damm <damm+renesas@opensource.se>

Simplify the R-Car DU configuration by removing various Kconfig entires.

Without this patch the DU driver has the following entries:
 - CONFIG_DRM_RCAR_DU
 - CONFIG_DRM_RCAR_HDMI
 - CONFIG_DRM_RCAR_LVDS
 - CONFIG_DRM_RCAR_VSP

With this patch the required entries are reduced to:
 - CONFIG_DRM_RCAR_DU

This changes simplifies configuration but the downside is obviously
larger run time size. We are however talking kilobytes in a world
using gigabytes.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Written against vsp1-kms-gen3-20150929
 
 drivers/gpu/drm/rcar-du/Kconfig           |   19 -----------------
 drivers/gpu/drm/rcar-du/Makefile          |   12 ++++-------
 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h |    8 -------
 drivers/gpu/drm/rcar-du/rcar_du_hdmienc.h |    9 --------
 drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h |   16 --------------
 drivers/gpu/drm/rcar-du/rcar_du_vsp.h     |    8 -------
 include/media/vsp1.h                      |   31 +++++++++++++++++++++++++++--
 7 files changed, 34 insertions(+), 69 deletions(-)

--- 0001/drivers/gpu/drm/rcar-du/Kconfig
+++ work/drivers/gpu/drm/rcar-du/Kconfig	2015-10-15 15:52:44.670513000 +0900
@@ -11,22 +11,3 @@ config DRM_RCAR_DU
 	help
 	  Choose this option if you have an R-Car chipset.
 	  If M is selected the module will be called rcar-du-drm.
-
-config DRM_RCAR_HDMI
-	bool "R-Car DU HDMI Encoder Support"
-	depends on DRM_RCAR_DU
-	help
-	  Enable support for external HDMI encoders.
-
-config DRM_RCAR_LVDS
-	bool "R-Car DU LVDS Encoder Support"
-	depends on DRM_RCAR_DU
-	help
-	  Enable support for the R-Car Display Unit embedded LVDS encoders.
-
-config DRM_RCAR_VSP
-	bool "R-Car DU VSP Compositor Support"
-	depends on DRM_RCAR_DU
-	depends on VIDEO_RENESAS_VSP1
-	help
-	  Enable support to expose the R-Car VSP Compositor as KMS planes.
--- 0001/drivers/gpu/drm/rcar-du/Makefile
+++ work/drivers/gpu/drm/rcar-du/Makefile	2015-10-15 15:53:07.890513000 +0900
@@ -5,12 +5,10 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_kms.o \
 		 rcar_du_lvdscon.o \
 		 rcar_du_plane.o \
-		 rcar_du_vgacon.o
-
-rcar-du-drm-$(CONFIG_DRM_RCAR_HDMI)	+= rcar_du_hdmicon.o \
-					   rcar_du_hdmienc.o
-rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
-
-rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
+		 rcar_du_vgacon.o \
+		 rcar_du_hdmicon.o \
+		 rcar_du_hdmienc.o \
+		 rcar_du_vsp.o \
+		 rcar_du_lvdsenc.o
 
 obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h
+++ work/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h	2015-10-15 15:51:36.950513000 +0900
@@ -17,15 +17,7 @@
 struct rcar_du_device;
 struct rcar_du_encoder;
 
-#if IS_ENABLED(CONFIG_DRM_RCAR_HDMI)
 int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
 				struct rcar_du_encoder *renc);
-#else
-static inline int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-					      struct rcar_du_encoder *renc)
-{
-	return -ENOSYS;
-}
-#endif
 
 #endif /* __RCAR_DU_HDMICON_H__ */
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.h
+++ work/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.h	2015-10-15 15:51:36.950513000 +0900
@@ -20,16 +20,7 @@ struct device_node;
 struct rcar_du_device;
 struct rcar_du_encoder;
 
-#if IS_ENABLED(CONFIG_DRM_RCAR_HDMI)
 int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
 			 struct rcar_du_encoder *renc, struct device_node *np);
-#else
-static inline int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
-				       struct rcar_du_encoder *renc,
-				       struct device_node *np)
-{
-	return -ENOSYS;
-}
-#endif
 
 #endif /* __RCAR_DU_HDMIENC_H__ */
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h
+++ work/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.h	2015-10-15 15:54:28.790513000 +0900
@@ -26,26 +26,10 @@ enum rcar_lvds_input {
 	RCAR_LVDS_INPUT_DU2,
 };
 
-#if IS_ENABLED(CONFIG_DRM_RCAR_LVDS)
 int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu);
 int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
 			   struct drm_crtc *crtc, bool enable);
 void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
 				  struct drm_display_mode *mode);
-#else
-static inline int rcar_du_lvdsenc_init(struct rcar_du_device *rcdu)
-{
-	return 0;
-}
-static inline int rcar_du_lvdsenc_enable(struct rcar_du_lvdsenc *lvds,
-					 struct drm_crtc *crtc, bool enable)
-{
-	return 0;
-}
-static inline void rcar_du_lvdsenc_atomic_check(struct rcar_du_lvdsenc *lvds,
-						struct drm_display_mode *mode)
-{
-}
-#endif
 
 #endif /* __RCAR_DU_LVDSENC_H__ */
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_vsp.h
+++ work/drivers/gpu/drm/rcar-du/rcar_du_vsp.h	2015-10-15 15:55:22.190513000 +0900
@@ -59,18 +59,10 @@ to_rcar_vsp_plane_state(struct drm_plane
 	return container_of(state, struct rcar_du_vsp_plane_state, state);
 }
 
-#ifdef CONFIG_DRM_RCAR_VSP
 int rcar_du_vsp_init(struct rcar_du_vsp *vsp);
 void rcar_du_vsp_enable(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_disable(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc);
 void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc);
-#else
-static inline int rcar_du_vsp_init(struct rcar_du_vsp *vsp) { return 0; };
-static inline void rcar_du_vsp_enable(struct rcar_du_crtc *crtc) { };
-static inline void rcar_du_vsp_disable(struct rcar_du_crtc *crtc) { };
-static inline void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) { };
-static inline void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc) { };
-#endif
 
 #endif /* __RCAR_DU_VSP_H__ */
--- 0001/include/media/vsp1.h
+++ work/include/media/vsp1.h	2015-10-15 16:00:51.170513000 +0900
@@ -18,16 +18,43 @@
 struct device;
 struct v4l2_rect;
 
+#ifdef CONFIG_VIDEO_RENESAS_VSP1
 int vsp1_du_init(struct device *dev);
-
 int vsp1_du_setup_lif(struct device *dev, unsigned int width,
 		      unsigned int height);
-
 int vsp1_du_atomic_begin(struct device *dev);
 int vsp1_du_atomic_update(struct device *dev, unsigned int rpf, u32 pixelformat,
 			  unsigned int pitch, dma_addr_t mem[2],
 			  const struct v4l2_rect *src,
 			  const struct v4l2_rect *dst);
 int vsp1_du_atomic_flush(struct device *dev);
+#else
+static inline int vsp1_du_init(struct device *dev)
+{
+	return -ENOSYS;
+}
+static inline int vsp1_du_setup_lif(struct device *dev, unsigned int width,
+				    unsigned int height)
+{
+	return 0;
+}
+static inline int vsp1_du_atomic_begin(struct device *dev)
+{
+	return 0;
+}
+static inline int vsp1_du_atomic_update(struct device *dev, unsigned int rpf,
+					u32 pixelformat,
+					unsigned int pitch, dma_addr_t mem[2],
+					const struct v4l2_rect *src,
+					const struct v4l2_rect *dst)
+{
+	return 0;
+}
+static inline int vsp1_du_atomic_flush(struct device *dev)
+{
+	return 0;
+}
+
+#endif
 
 #endif /* __MEDIA_VSP1_H__ */

             reply	other threads:[~2015-10-15  7:11 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-15  7:11 Magnus Damm [this message]
2015-10-15  7:16 ` [PATCH/RFC] Simplify Gen3 DU and VSP Kconfig bits Laurent Pinchart
2015-10-15  7:57 ` Magnus Damm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151015071120.11093.50169.sendpatchset@little-apple \
    --to=magnus.damm@gmail.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox