From: Simon Horman <horms@verge.net.au>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Magnus Damm <magnus.damm@gmail.com>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
linux-serial@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH v2 12/16] ARM: shmobile: r8a7793 dtsi: Rename the serial port clock to fck
Date: Mon, 14 Dec 2015 08:15:34 +0000 [thread overview]
Message-ID: <20151214081533.GC9929@verge.net.au> (raw)
In-Reply-To: <1447958173-543-13-git-send-email-geert+renesas@glider.be>
On Thu, Nov 19, 2015 at 07:36:09PM +0100, Geert Uytterhoeven wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> The clock is really the device functional clock, not the interface
> clock. Rename it.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Acked-by: Simon Horman <horms+renesas@verge.net.au>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some more scif nodes have been added recently.
I updated the patch accordingly before queuing it up.
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 19 Nov 2015 19:36:09 +0100
Subject: [PATCH] ARM: shmobile: r8a7793 dtsi: Rename the serial port clock to
fck
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
[horms: updated to cover recently added (h)scif* nodes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index df607a92b2ed..5a284cd721a6 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -302,7 +302,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -314,7 +314,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -326,7 +326,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -338,7 +338,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -350,7 +350,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -362,7 +362,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -374,7 +374,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -386,7 +386,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -398,7 +398,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -410,7 +410,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -422,7 +422,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -434,7 +434,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -446,7 +446,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -458,7 +458,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -470,7 +470,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -482,7 +482,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -494,7 +494,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -506,7 +506,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.1.4
next prev parent reply other threads:[~2015-12-14 8:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 18:35 [PATCH v2 00/16] serial: sh-sci: Clock Cleanups Geert Uytterhoeven
[not found] ` <1447958173-543-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-11-19 18:35 ` [PATCH v2 01/16] serial: sh-sci: Drop the interface clock Geert Uytterhoeven
2015-11-20 16:27 ` Rob Herring
2015-12-13 6:42 ` Greg Kroah-Hartman
2015-12-14 8:15 ` Simon Horman
[not found] ` <20151214081540.GD9929-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2015-12-14 8:16 ` Simon Horman
2015-11-19 18:35 ` [PATCH v2 02/16] sh: Rename sci_ick and sci_fck clock to fck Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 03/16] sh: Remove sci_ick clock alias Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 04/16] ARM: shmobile: sh73a0 dtsi: Rename the serial port clock to fck Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 05/16] ARM: shmobile: r7s72100 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 06/16] ARM: shmobile: r8a73a4 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 07/16] ARM: shmobile: r8a7740 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 08/16] ARM: shmobile: r8a7778 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 09/16] ARM: shmobile: r8a7779 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 10/16] ARM: shmobile: r8a7790 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 11/16] ARM: shmobile: r8a7791 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 12/16] ARM: shmobile: r8a7793 " Geert Uytterhoeven
2015-12-14 8:15 ` Simon Horman [this message]
2015-11-19 18:36 ` [PATCH v2 13/16] ARM: shmobile: r8a7794 " Geert Uytterhoeven
2015-11-19 18:36 ` [PATCH v2 14/16] arm64: renesas: r8a7795 " Geert Uytterhoeven
2015-11-19 18:43 ` Laurent Pinchart
2015-11-19 18:36 ` [PATCH v2 15/16] h8300: dts: " Geert Uytterhoeven
2015-11-19 18:43 ` Laurent Pinchart
2015-11-19 18:36 ` [PATCH v2 16/16] serial: sh-sci: Drop the sci_fck clock fallback Geert Uytterhoeven
2015-12-13 6:42 ` Greg Kroah-Hartman
2015-11-24 2:44 ` [PATCH v2 00/16] serial: sh-sci: Clock Cleanups Simon Horman
2015-12-14 8:15 ` Simon Horman
2015-12-14 8:31 ` Geert Uytterhoeven
2015-12-14 9:11 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151214081533.GC9929@verge.net.au \
--to=horms@verge.net.au \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-serial@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).