From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: shmobile: r8a7795: DU and IPMMU prototype hack
Date: Thu, 17 Dec 2015 06:57:15 +0000 [thread overview]
Message-ID: <20151217065715.31261.43936.sendpatchset@little-apple> (raw)
From: Magnus Damm <damm+renesas@opensource.se>
This prototype hack tries to hook up the r8a7795 DU/VSPD/FCPVD
instance to the IPMMU device and hack the driver to get something
to work. The IPMMU device has been proven to work with other
on-chip r8a7795 devices with upstream support, however the DU
devices are not yet working and seem to be a moving target.
Developed on top on older renesas-drivers release that has the
DU patch stack included. More recent releases have the DU patch
stack excluded due to merge issues. Needs more work.
Not-Yet-Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
Developed on top of renesas-drivers-2015-12-08-v4.4-rc4 and
[PATCH 00/06] iommu/ipmmu-vmsa: IPMMU multi-arch update
[PATCH/RFC 00/10] iommu/ipmmu-vmsa: Experimental r8a7795 support
[PATCH/RFC 00/03] ARM: shmobile: r8a7795 Salvator-X IPMMU test code
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 15 +++++++++++++--
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 4 ++--
drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 2 ++
drivers/media/platform/vsp1/vsp1_wpf.c | 3 +++
4 files changed, 20 insertions(+), 4 deletions(-)
--- 0028/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ work/arch/arm64/boot/dts/renesas/r8a7795.dtsi 2015-12-17 11:28:23.700513000 +0900
@@ -325,7 +325,14 @@
compatible = "renesas,ipmmu-r8a7795";
reg = <0 0xe6740000 0 0x1000>; /* IPMMU-DS0 */
#iommu-cells = <1>;
- status = "okay";
+ status = "disabled";
+ };
+
+ ipmmu_vi: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a7795";
+ reg = <0 0xfebd0000 0 0x1000>;
+ #iommu-cells = <1>;
+ status = "disabled";
};
dmac0: dma-controller@e6700000 {
@@ -936,6 +943,7 @@
reg = <0 0xfea20000 0 0x8000>;
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 623>;
+ iommus = <&ipmmu_vi 8>;
renesas,has-lif;
renesas,has-lut;
@@ -948,6 +956,7 @@
reg = <0 0xfea28000 0 0x8000>;
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 622>;
+ iommus = <&ipmmu_vi 9>;
renesas,has-lif;
renesas,has-lut;
@@ -960,6 +969,7 @@
reg = <0 0xfea30000 0 0x8000>;
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 621>;
+ iommus = <&ipmmu_vi 10>;
renesas,has-lif;
renesas,has-lut;
@@ -972,6 +982,7 @@
reg = <0 0xfea38000 0 0x8000>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
+ iommus = <&ipmmu_vi 11>;
renesas,has-lif;
renesas,has-lut;
@@ -996,7 +1007,7 @@
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
- vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+ vsps = <&vspd0>;
ports {
#address-cells = <1>;
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ work/drivers/gpu/drm/rcar-du/rcar_du_drv.c 2015-12-17 11:10:01.380513000 +0900
@@ -138,13 +138,13 @@ static const struct rcar_du_device_info
.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
| RCAR_DU_FEATURE_EXT_CTRL_REGS
| RCAR_DU_FEATURE_VSP1_SOURCE,
- .num_crtcs = 4,
+ .num_crtcs = 1,
.routes = {
/* R8A7795 has one RGB output, one LVDS output and two
* (currently unsupported) HDMI outputs.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
- .possible_crtcs = BIT(3),
+ .possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
--- 0001/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ work/drivers/gpu/drm/rcar-du/rcar_du_vsp.c 2015-12-17 11:10:01.380513000 +0900
@@ -329,6 +329,8 @@ int rcar_du_vsp_init(struct rcar_du_vsp
vsp->vsp = &pdev->dev;
+ rcdu->ddev->dev = vsp->vsp; // HACK
+
ret = vsp1_du_init(vsp->vsp);
if (ret < 0)
return ret;
--- 0001/drivers/media/platform/vsp1/vsp1_wpf.c
+++ work/drivers/media/platform/vsp1/vsp1_wpf.c 2015-12-17 11:11:46.790513000 +0900
@@ -158,6 +158,9 @@ static int wpf_s_stream(struct v4l2_subd
if (vsp1->pdata.uapi)
mutex_lock(wpf->ctrls.lock);
outfmt |= wpf->alpha->cur.val << VI6_WPF_OUTFMT_PDV_SHIFT;
+#if 1
+ outfmt |= (1 << 20);
+#endif
vsp1_wpf_write(wpf, VI6_WPF_OUTFMT, outfmt);
if (vsp1->pdata.uapi)
mutex_unlock(wpf->ctrls.lock);
next reply other threads:[~2015-12-17 6:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 6:57 Magnus Damm [this message]
2015-12-18 1:56 ` [PATCH] ARM: shmobile: r8a7795: DU and IPMMU prototype hack Khiem Nguyen
2015-12-27 9:08 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151217065715.31261.43936.sendpatchset@little-apple \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox